MILITARY PLATING SPECIFICATIONS PROCESS MIL. SPEC ...

1 MILITARY PLATING SPECIFICATIONSPROCESS MIL. SPEC. THICKNESS COMMENTSCHROME QQC-320bExcellent hardness(Rc 68-74) Type .. BrightWear resistance, and erosion Type .. Has low coefficient Class .. Decorative PLATING . (usually overOf friction, and is resistant to copper and nickel undercoats.)

2 Heat. In addition to above Class as specified on Engineering PLATING . Properties, can be rendered on drawing. Pourous for lubrication bake at 375 deg +/- 25 deg Class .. Plated to specified dimensions orF for 3 hrs or as specified. Processed to specified Dimensions after peening and post baking Class.

3 Parts below Rockwell C40 andNot required. And subject to static loads or Designed for limited life under Dynamic peen per MIL-S-13165

4 Class .. Parts below Rockwell C40 and Designed for unlimited life under Dynamic bake at 375 deg +/- 25 deg Class .. Parts have hardness of RockwellF for 3 hrs.

5 C40 or above and subject to static Loads or designed for limited life Under dynamic loadsShot peen before PLATING .

6 Class .. Parts have hardness of RockwellPost bake at 375 deg +/- 25 deg C40 or above and are designed F for 3 hrs. for unlimited life under dynamic NICKEL Mil-C-26074 BSimilar to stainless steel in color.

7 Class Unless otherwise As coatedPlates uniformly in recesses and Class Steel, copper, nickel, and cobaltCavities (does not build up on base alloys. Heat treated afterEdges. resistance is good for Class.)

8 Aluminum alloys other thanCoatings over .001 thickness. Alloy 7075. Heat treated after nickel is used extens- Grade .001 .. Minimum thickness. For iron andIvely in salvage of mis-machined aluminum based Also, for inside dimensions Grade.

9 0005 .. Minimum thickness. For copper, And irregular shapes (where assy nickel, and cobalt based need uniformity pro-Vided by electroless PROCESS .)NICKEL QQ-N-290 AClass 1 PLATING is used to pro- Class .. Corrosion protective iron, copper, or zinc Steel, Zinc & Copper andAlloys against corrosive attack.

10 Zinc alloys. Copper alloysUsed as undercoat for chromiumOr precious metals; or for d cor- Grade .0016 .. SD, and M ..Ative. Grade .0012 .. SD, and M SB, and MForms of nickel deposition: Grade .0010 .. M SB,SD, and MSB-Single layer coating.