Transcription of Mini/MicroSIM to NanoSIM cutting guide
1 Mini/MicroSIM to NanoSIM cutting guide Equipment: - Ruler - Tape - Good quality scissors (test on old credit card). - Nail file or sand paper (220 grit or higher). - Permanent felt tip marker pen Instructions: 1. Measure side rulers on guide to ensure guide has been printed to the correct scale. mm 2. Tape SIM to matching center outline with gold contacts up. Place tape on edges so as to 6 Inches 15 cm not cover Nano SIM area. 3. Align ruler to cut line so that the ruler covers the gold contacts and mark with permanent marker felt pen. Repeat for the 5 cut lines. mm thickness 4. Remove SIM from this sheet and trim with scissors so that a portion of the marker lines are still visible. Use nail file or sand paper to trim so mm that no marker lines can be seen. Trim further and round corners with nail file or sandpaper until it fits in the iPhone 5 SIM tray. 5. Sand or file plastic logo side of SIM so that it guide provided by GoSoftWorks. Makers of the astronomy sits flush with the edge of SIM tray ( mm).
2 GoSkyWatch Planetarium app. Hold SIM and rub against file or sand paper. DO Go outside and explore the night sky. NOT sand gold contact side. 6. Finish by lightly sanding all edges. 15 cm GoSoftWorks takes no responsibility to damage 6 Inches caused to the SIM or phone. It's your own risk.
