MIXURETHANE 100C - pychem-cc.com

1 MIXURETHANE 100C. Single Component Polyurethane Based Waterproof Top Coating Introduction Technical Data and Properties MIXURETHANE 100C is one component, pigmented, elastic, high solid, aliphatic Hardness (Shore D 30 shore D (ASTM D. polyurethane coating with excellent UV resistance Scale) 2240). used as a top-coat for protection over exposed >200% ASTM D 412 / DIN. surfaces. It cures with the humidity in the Elongation At Break 52455). atmosphere to produce a membrane with 20 N/mm2 (ASTM D. uniform adhesion over the entire surface. It does Tensile Strength 412 / DIN 52455). not yellow/discolor when exposed to sunlight. It is Adhesion to 2N/mm2 (ASTM D 903). based on aliphatic polyurethane resin, which Concrete results in excellent mechanical, chemical, Service -40 C to +80 C. thermal, UV and natural element resistance Temperature properties.

2 Gloss retention VERY GOOD (DIN 67530). (after 2000 hours). Characteristic Simple application (roller or airless spray). Strong and uniform adhesion on almost any type Product Management of surface, Excellent UV resistance. Clean the surface using a high pressure washer, It does not discolor when exposed to sunlight. and remove oil, grease and wax contaminants, When applied forms seamless membrane without cement laitance, loose particles, mold release joints. agents must be removed. Stir the product well Provides excellent adhesion to almost any type of before using. Apply it by roller one or two layers. surface. Allow 4-6 hours (not more than 36 hours) to Provides excellent adhesion to ceramic tiles and cure, between the two layers. glazed surface The waterproofed surface can be used for Consumption domestic pedestrian traffic.

3 150 250 g/m2 in one or two layers. This Appropriation coverage is based on application by roller onto Surfaces exposed to high abrasion, a smooth surface in optimum conditions. Public pedestrian and light traffic areas , Factors like surface porosity, temperature and Stadiums, application method can alter consumption. Over exposed car parks, Waterproofing of surfaces exposed to heavy wear Packing & Storage conditions. MIXURETHANE 100C is available in 20 kg, 10 kg, 5 kg and 1kg pails. Pails should be stored in dry and cool rooms for up to 12 months. Protect the material against moisture and direct sunlight. Storage temperature: 5o-30oC. Products should remain in their original, unopened containers, bearing the manufacturers name, product designation, and batch number and application precaution labels. MIXURETHANE 100C. Single Component Polyurethane Based Waterproofing Coating Health & Safety MIXURETHANE 100C contains isocyanates.

4 See information supplied by the manufacturer. Please study the Safety Data sheet. Contains volatile flammable solvents. Apply in well-ventilated, no smoking areas, away from naked flames. In closed spaces use ventilators and carbon active masks. Keep in mind that solvents are heavier than air so they creep on the floor. Please ask the MSDS (Material Safety Data Sheet) for more information.