MODEL S-100 - AMF Reece

1 MODEL S-100 EYELET BUTTONHOLE MACHINEPARTS AND SERVICE MANUALMACHINE SERIAL No. PART NUMBER 97. is trademark of AMF Group, manual is valid from the machine serial No.: P174582 Warranty Registration Card (Please Fax or Mail immediately after installation)Note: All Warranty Claims Void, unless Registration Card on file at AMF Reece HQMachine MODEL number:(S100, S101, S104, S105, S 311, Deco, S4000 , EBS Mark II, ES505, etc)Manufacturer s serial or production number:Installation Site Information:Customer s Name:Customer s Mailing Address:Customer s Telephone Number:Supervising Mechanic s or Technician s Name:Signature of Supervising Technician:AMF Reece Technician s Name:AMF Reece Technician s Signature:Type of garment produced at this location?Average Daily Production Expected from this machine?(number of buttonholes, jackets sewn, pants produced, buttons sewn, etc)Any special requirements required at this location?What other AMF Reece Machines are at this location?

2 How can we serve you better?Tov rn 837, 798 11 Prostejov, Czech RepublicFax: +420 582 360 606, e-mail: website: WARRANTY ON NEW AMF Reece EQUIPMENTW arranty provisions:A ninety (90) day limited service labor warranty to correct defects in installation, workmanship, or material without charge forlabor. This portion of the warranty applies to machines sold as installed one (1) year limited material warranty on major component parts to replace materials with defects. Any new part believeddefective must be returned freight prepaid to AMF Reece , Inc. for inspection. If, upon inspection, the part or material is deter-mined to be defective, AMF Reece , Inc. will replace it without charge to the customer for parts or labor warranty period shall begin on the completed installation date. Material warranty shall begin on the date theequipment is shipped from AMF Reece , :Excluded from both service labor warranty and material warranty are: (1) Consumable parts which would be normally consideredreplaceable in day-to-day operations.

3 These include parts such as needles, knives, loopers and spreaders. (2) Normal adjustmentand routine maintenance. This is the sole responsibility of the customer. (3) Cleaning and lubrication of equipment. (4) Partsfound to be altered, broken or damaged due to neglect or improper installation or application. (5) Damage caused by the use ofnon-Genuine AMF Reece parts. (6) Shipping or delivery is no service labor warranty for machines sold as uninstalled .Equipment installed without the assistance of a certified technician (either an AMF Reece Employee, a Certified Contractor, orthat of an Authorized Distributor) will have the limited material warranty only. Only the defective material will be covered. Anycharges associated with the use of an AMF Reece Technician or that of a Distributor to replace the defective part will be thecustomer s OTHER WARRANTY, EXPRESS OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, and FITNESS FORA PARTICULAR PURPOSE, OR ANY OTHER MATTER IS GIVEN BY SELLER OR SELLER S AGENT IN CONNECTION HERE-WITH.

4 UNDER NO CIRCUMSTANCES SHALL SELLER OR SELLER S AGENT BE LIABLE FOR LOSS OF PROFITS OR ANYOTHER DIRECT OR INDIRECT COSTS, EXPENSES, LOSSES OR DAMAGES ARISING OUT OF DEFECTS IN OR FAILURE OFTHE EQUIPMENT OR ANY PART TO DO IF THERE IS A QUESTION REGARDING WARRANTYIf a machine is purchased through an authorized AMF Reece , Inc. distributor, warranty questions should be first directed to thatdistributor. However, the satisfaction and goodwill of our customers are of primary concern to AMF Reece , Inc. In the event thata warranty matter is not handled to your satisfaction, please contact the appropriate AMF Reece office:EuropeProstejov, Czech RepublicPhone:Fax:e-mail:(+420) 582-309-286(+420) 10/ 2005e - mail service parts @amf ,website: Phones: + 420 582 309 146 ( service), + 420 582 309 286 (spare parts), Fax : + 420 582 360 606S1001-9 Revised 10/2005e - mail service parts website: : +420 582 309 146 (service), +420 582 309 286 (spare parts), Fax +420 582 360 606A-INTRODUCTION1.

5 1-12. 1-23. Safety of 1-34. Security of the operator and 1-45. List of the safety labels and 1-66. Position of the labels and the safety 1-7B - MACHINE INSTALLATION1. Content of the shipping 1-82. 1-83. Machine unpacking and 1-94. Adjustment of the T - Belt tension for Adjustment of the left T - belt Thread stand - OPERATOR INSTRUCTIONS1. Preparing to Needle 1-16D - MACHINE ADJUSTMENTS1. Stitches density Adjustment of the stitches density in the Adjustment of the stitches density in cross Lengths of the Change of the buttonhole shape - change of the lateral Change of the width Principles of Bed plate Testing the cam Turning Stopping Setting - up the mechanism for fabric Clamp plate Length setting - up of the second buttonhole Eye shape Needle bar Clearance Between the Looper and the Spreaders Loopers OF CONTENTS1-10S100 Revised 10/ 2005e - mail service parts @amf ,website: Phones: + 420 582 309 146 ( service), + 420 582 309 286 (spare parts), Fax : + 420 582 360 606 TABLE OF CONTENTS20.

6 Setting - up of the spreaders Cutting lever and Knife and Cutting Steel Cutting space Cut Before and Cut 1-5325. Knife adjustment for upper thread Thread draw off - ROUND EYE ADJUSTMENTS1. Different position of the machine Stop motion Round Eye Machine Eyelet Diameter or Cutting Space Clamp feet using for correct buttonhole Adjustment of the supplied - MACHINE ADJUSTMENT - CROSS BAR1. Different position of the machine Cross bar relationship to the first and second row of the Device for sewing the cross Readjustment of the cross bar machine to machine without Readjustment of the cross bar machine to the fly bar Hand Cross bar length Correction of the cross bar position in axis Cam assembly Change of the machine - MACHINE MAINTENANCE1. Cleaning and maintenance the Periodic Machine Machine - DOCUMENTATION1. Electrical 10/2005e-mail: ; ; website: : +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606A - INTRODUCTION1.

7 INTRODUCTIONThe S100-030/031/032 (AF-CB/CA-RE) is a versatile two thread chain stitch sewing machine forsewing buttonholes with possibility to insert the gimp. The regular eye, Cut Before / Cut After, adjustableflybar machine may be used for suits, jeans and a wide variety of sewing S 100-052/053 (RE) is two threads, pertinently one thread machine, which is sewing round chainstitch buttonhole. It is used for sewing decorative buttonholes, for example on the hoods or S 100-060 (CRB) is two threads machine with chain stitch and opportunity insert the gimp forsewing buttonholes with cross bar and flybar. It allows sewing by one chain thread stitch, which is suitablefor smaller highlighting of the stitches above the fabric (smaller plasticity).The size of the buttonhole (with eye or without eye) and type of the buttonhole end (open end, flybar orcross bar) are ensured by changeable semiautomatic lubrication system uses drip oil wicks to lubricate the critical machine prevent machine damage, it is possible to check the level of oil in the visibly placed oil sight gauge.

8 Machine models:S100 - 030 /031/032AF-CB/CA-RES100 - 030for standard sewingS100 - 031for jeans sewingS100 - 032for textilie sewingS100 - 052RE (Small eye)S100 - 053RE (Large eye)S100 - 060 CRBNote:AF-Adjustable FlybarCB-Cutting BeforeCA-Cutting AfterCRB-Cross BarRE-Round EyeAll these machines have cut upper thread 10/2005e-mail: ; website: : +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606A - INTRODUCTION2. SPECIFICATIONSM achine TypeS100 - 030S100 - 033 S100 - 035 S100 - 036 S100 - 060 S100 - 052S100 - 053 DescriptionEyelet buttonhole machine for sewing the buttonholes with the cross bar and flybarButtonhole styleSewing speed1450 5% stitches/min13-32 mmStitch DensityBite RangeCord Trim--Eye ; 3; ; ; 4; 5; 6; 7 Flybar LengthFlybar DensityNumber of stitches in the eyeCross Bar Length4 - 8 mmCross Bar Density6 - 16 stitches / cmClamp Foot HeightMaximum work thicknessButtonhole Cutting ModeCutting Space* Recommended threadsOperating ConditionsAir Pressure--Machine db LevelMachine Head DimensionMachine Head W eight66 kgTable DimensionMachine Weight151 kgElectrical Requirements1 NPE~60Hz 110V/TN/S ; 3 NPE~60Hz 230V/TN/S ; 1 NPE~50Hz 230V/TN/S.

9 3 NPE~50Hz 400V/TN/S8 - 16 stitches/cm 64 kg (143 lb)64 kg (143 lb)780 mm (31") - height x 1100 mm (43") - length x 600 mm ( ") - width149 kg149 kgstandard cutting after (CA), possible setting cutting before (CB)standard - (minimum ; maximum )-Buttonhole Length10 - 38 mm ( - ") without upper thread trimming, 10 - 32 mm ( - ") with upper thread trimming------6-16 stitches /cm (15-41 stitches /inch)without eye, x mm ( x "); x mm ( x ")max 6 mm (1/4")600 mm ( ") - height x 465 mm (18") - length x 530 mm (21") - (1807 D Nm 100 - standard) (1807 D Nm 110-130 - thick fabric)according to IEC 364-3, IEC 364-5-51 temperature from +5 to 40 C, relative air humidity from 30 to 80 %from 75 to 81 dB at max. bar (80 psi)-Size 80,100,120-6 - 16 stitches / cm10 mm ( ")standard 6 mm (possible range - mm)Eyelet Buttonhole MachineEyelet buttonhole machine for sewing the regular eye buttonholesNeedle system1768 5% stitches/min1768 5% stitches/min2 - 4 mmyes-888* Note: If a customer uses thread size 100 and less, the manufacturer recommends to use the leftlooper 10/2005e-mail: ; ; website: : +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 6063.

10 INSTRUCTION FOR SAFETY OF WORKThe sewing machine S -100 is designed and produced to be highly reliable. Special attention is given forsecuring of the service simplicity and effective safety protection of the operators and machine machine S -100 has safety appliance which protects operator but also machine and respects validsafety and hygienic rules for usual technological using of the machine. These safety appliances include plugof supply, operating switch (circuit breaker) and are safety labels placed on the machine for warning for supplementary danger. Do not remove anddamage these labels. When the label is damaged, order the new one. The said precautions can not cover allsafety aspects that is why operator before using of the machine has to read and understand to this instruc-tions. The mistakes will be eliminated during machine installation and during its own operation. Do not tryto put the machine into operation without reading all the machine instructions and until well understanding toevery function and are three types of safety direction in these instructions:DANGER!