MOLYKOTE(R) G-RAPID PLUS SPRAY

1 SAFETY data sheet According to article 31 and Annex II of the EU REACH Regulation Version: Revision Date: Superseded date: molykote (R) G-RAPID plus SPRAY 1 of 10 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY Product name : molykote (R) G-RAPID plus SPRAY Identified uses : Lubricants and additives Uses advised against : None known. Company : Dow Corning Europe rue Jules Bordet - Parc Industriel - Zone C B-7180 Seneffe Belgium E-mail address (Safety data sheet ) : Customer Service : English Tel: +49 611237507 Deutsch Tel: +49 611237500 Fran ais Tel: +32 64511149 Italiano Tel: +32 64511170 Espa ol Tel: +32 64511163 Fax: +32 64888683 Emergency Phone Number : Dow Corning (Barry 24h) Dow Corning (Wiesbaden 24h) Dow Corning (Seneffe 24h) Tel: +44 1446732350 Tel: +49 61122158 Tel: +32 64 888240 2.

2 HAZARDS IDENTIFICATION Classification of the substance or mixture According to EU Directives 67/548/EEC or 1999/45/EC: R12 Extremely flammable. This information is based on test data from similar products. Label elements Labelling according to EEC Directive Symbols : F+ Extremely flammable. R-phrases : R12 Extremely flammable. S-phrases : S2 Keep out of the reach of children. S16 Keep away from sources of ignition - no smoking. S23(S) Do not breathe SPRAY . S24/25 Avoid contact with skin and eyes. S51 Use only in well-ventilated areas. SAFETY data sheet According to article 31 and Annex II of the EU REACH Regulation Version: Revision Date: Superseded date: molykote (R) G-RAPID plus SPRAY 2 of 10 Do not SPRAY on a naked flame or any incandescent material. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 C.

3 Do not pierce or burn, even after use. SAFETY data sheet According to article 31 and Annex II of the EU REACH Regulation Version: Revision Date: Superseded date: molykote (R) G-RAPID plus SPRAY 3 of 10 3. COMPOSITION / INFORMATION ON INGREDIENTS Chemical characterization: Molybdenum disulfide aerosol According to EU Directives 67/548/EEC or 1999/45/EC: Name CAS-No. EINECS/ ELINCS No. REACH Registration Number Conc. (% w/w) Classification Butane 106-97-8 203-448-7 - F+ R12 Naphtha (petroleum), hydrotreated heavy 64742-48-9 265-150-3 - Xn R65 R66 White mineral oil (petroleum)

4 8042-47-5 232-455-8 - Substance with a Community workplace exposure limit Molybdenum sulfide 1317-33-5 215-263-9 - Substance with a Community workplace exposure limit Calcium dihydroxide 1305-62-0 215-137-3 - Xi R38 R41 Graphite 7782-42-5 231-955-3 - Substance with a Community workplace exposure limit According to Regulation (EC) No. 1272/2008: Name CAS-No. EINECS/ ELINCS No.

5 REACH Registration Number Conc. (% w/w) Classification Butane 106-97-8 203-448-7 - Flammable gas: Category 1 - H220 Naphtha (petroleum), hydrotreated heavy 64742-48-9 265-150-3 - Aspiration hazard: Category 1 - H304 EUH066 White mineral oil (petroleum) 8042-47-5 232-455-8 - Substance with a Community workplace exposure limit Molybdenum sulfide 1317-33-5 215-263-9 - Substance with a Community workplace exposure limit Calcium dihydroxide 1305-62-0 215-137-3 - Skin corrosion/irritation.

6 Category 2 - H315 Serious eye damage/eye irritation: Category 1 - H318 Graphite 7782-42-5 231-955-3 - Substance with a Community workplace exposure limit For the full text of the R-phrases mentioned in this Section, see Section 16. For the full text of the H-Statements mentioned in this Section, see Section 16. CLP classifications are based on all current available data including from known international organizations. These classifications are subject to revision as SAFETY data sheet According to article 31 and Annex II of the EU REACH Regulation Version: Revision Date: Superseded date: molykote (R) G-RAPID plus SPRAY 4 of 10 more information becomes available. 4. FIRST AID MEASURES Description of First Aid Measures: On contact with eyes : Flush with water.

7 On skin contact : Flush with water. If inhaled : Remove to fresh air. Obtain medical attention. On ingestion : Do not induce vomiting. Obtain medical attention. 5. FIRE-FIGHTING MEASURES Suitable extinguishing media : On large fires use dry chemical, foam or water SPRAY (fog). On small fires use carbon dioxide (CO2), dry chemical or water SPRAY . Water can be used to cool fire exposed containers. Unsuitable extinguishing media : None known. Hazards during fire fighting : Pressurised container capable of exploding if heated. Hazardous Combustion Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds.

8 Formaldehyde. Sulphur products. Special protective equipment/procedures : A self-contained respirator and protective clothing should be worn. Determine the need to evacuate or isolate the area according to your local emergency plan. Use water SPRAY to keep fire exposed containers cool. 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures : A self-contained respirator and protective clothing should be worn. Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Environmental precautions : Prevent from spreading or entering into drains, ditches or rivers by using sand, earth or other appropriate barriers. Do not empty into drains. Methods and materials for containment and cleaning up : Determine the need to evacuate or isolate the area according to your local emergency plan.

9 Eliminate all possible sources of ignition. SAFETY data sheet According to article 31 and Annex II of the EU REACH Regulation Version: Revision Date: Superseded date: molykote (R) G-RAPID plus SPRAY 5 of 10 7. HANDLING AND STORAGE Advice on safe handling : General ventilation is required. Local ventilation is required. Do not breathe SPRAY or mist. Do not breathe vapour. Avoid skin and eye contact. Do not SPRAY on a naked flame or any incandescent material. Keep away from sources of ignition - no smoking. Do not empty into drains. Advice on storage : Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 C. Do not pierce or burn, even after use. Store in a flameproof, well ventilated area. Storage temperature: maximum 50 C Specific uses : Refer to technical data sheet available on request.

10 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Control parameters Name CAS-No. Exposure Limits Butane 106-97-8 600 ppm TWA 750 ppm STEL 1,450 mg/m3 TWA 1,810 mg/m3 STEL Naphtha (petroleum), hydrotreated heavy 64742-48-9 10 mg/m3 STEL Oil Mist,mineral 5 mg/m3 TWA Oil Mist,mineral White mineral oil (petroleum) 8042-47-5 10 mg/m3 STEL Oil Mist,mineral 5 mg/m3 TWA Oil Mist,mineral Molybdenum sulfide 1317-33-5 10 mg/m3 TWA as Mo, insoluble compounds 20 mg/m3 STEL as Mo, insoluble compounds Calcium dihydroxide 1305-62-0 5 mg/m3 TWA Graphite 7782-42-5 10 mg/m3 TWA Inhalable dust 4 mg/m3 STEL Respirable dust Exposure controls Engineering Controls : Ventilation : Refer to Section SAFETY data sheet According to article 31 and Annex II of the EU REACH Regulation Version: Revision Date: Superseded date.