Mooney Viscometer Coefficient Of Friction Tester a ...

1 Coefficient Of Friction Tester10-11 Colrado CourtHallam, Victoria 3803 AustraliaPh: +61 3 9708 6885 Fax: +61 3 9708 6770 Email: #3-2011 Appearance & specifications listed are subject to change without 2011 IDM Instruments Pty Ltd. All Rights measurable ::UUMM--22005500 Viscosity Test: Mooney initial (MI) Minimum viscosity (ML) Maximum viscosity (MF) testing temperature curveScorch Test: Scorch time at T5 and T35, or at T3 and T18, or others Sorch vs time curve Viscosity value at T5 and T35, or T3 and T18, or others Melting index Sorch index testing temperature curveStress Relaxation Test.

2 Relaxation time (Tx) % of viscosity decay (Xy%) The value of the exponent a, the constant k,the correlationcoefficient r,and the area A of the test Plot log Mooney units vs log time|FEATURES| Auto-zeroed before each test Auto-calibration of viscosity Does not exceed 2 min and 50 sec when heating from ambient to 100 C C During testing the die chamber temperature will be redeemed to the tolerance of C withinone minute from die closure|TEST REPORTS|Test report of Mooney Viscosity: +4 CHK2020426\13 (S) (%) report of Mooney Scorch: \13:10183:564:571:0119 |ROTORS FOR Mooney Viscometer | Coefficient Of Friction Tester10-11 Colrado CourtHallam, Victoria 3803 AustraliaPh: +61 3 9708 6885 Fax: +61 3 9708 6770 Email: #3-2011 Appearance & specifications listed are subject to change without 2011 IDM Instruments Pty Ltd.

3 All Rights measurable ::UUMM--22005500 Providing frequency conversion type Mooney Viscometer to test the viscosity of particular rubber Statistical Process Control Software (SPC) storage: ML and MF, or any other two Mooney time at T5 and T35 and T18, or at any other scorch time or relaxation time and its statistical analysis of the above stored data by X-Rm chart, X-R chart, Normaldistribution chart and Histogram classification of the testing in grade A or B or off categoriesCoefficient Of Friction Tester10-11 Colrado CourtHallam, Victoria 3803 AustraliaPh: +61 3 9708 6885 Fax: +61 3 9708 6770 Email: #3-2011 Appearance & specifications listed are subject to change without 2011 IDM Instruments Pty Ltd.

4 All Rights measurable ::UUMM--22005500|CURVES ILLUSTRATION| Coefficient Of Friction Tester10-11 Colrado CourtHallam, Victoria 3803 AustraliaPh: +61 3 9708 6885 Fax: +61 3 9708 6770 Email: #3-2011 Appearance & specifications listed are subject to change without 2011 IDM Instruments Pty Ltd. All Rights measurable ::UUMM--22005500|SPECIFICATIONS| Standards: ASTM D1646, ISO 289, JIS K6300 The standard model UM-2050 consists of one main testing unit and one subunit for control anddata analysis, equipped with one PC, one colour monitor and one colour jet printer range: Ambient to 200 : Resolution: C Moving die frequency: 2rpm (or frequency conversion type upon request) Mooney Unit: M (1M = 1bf-in) Mooney display resolution: Mooney range: 0 200M (or higher upon request) Maximum load: 250M (or higher upon request) Scorch time: 0 Rotor types.

5 Small and Large Pneumatic pressure: 65 Psi or (Air compressor is not included) Electricity Supply: AC 220V 10%, 50/60Hz, 7A, Single phase, or upon user request Unit:(L)700mm x(W)590mm x(H)1240mmSub Unit: (L)600mm x (W)500mm x (H) Unit Packaged: (L)880mm x(W)880mm x (H)1540mmSub Unit Packaged: (L)820mm x (W)700mm x (H)800mm Unit Nett: 250kgSub Unit Nett: Unit Gross: 330kgSub Unit Gross: 90kg Accessories:1 x Large rotor1 x Small rotor2 x die cutter2 x 2kg Calibrator1 x Copper bar1 x Copper brush5 x Fuses10 x Rubber seals2 x Calibration certificates1 x Operation manual