MSDS- ABS TR-558AI MSDS Issue Date 1997. 04. 12 …

1 MSDS- ABS TR-558AI Grade TR-558 AIABSRESIN1. Chemical Product & Manufacturer's Product NameMethyl Metha acrylate, Acrylonitrile, Butadiene, and Styrene Goods, Automotive Parts, Package, TypeThermoplasticsd. Manufacturer's Address LG Chem, 20, Yoido-dong, Youngdungpo-gu, Seoul, 150-721, Koreae. Prepared By LG Chem / ABS PS Division2. Metha Acrylate Physical & Chemical RateNot applicable at standard PressureNot applicable at standard DensityNot applicable at standard in WaterinsolubleISolubility in other SolventSoluble in THF, Acetone and other Analogous Solvents4.

2 Health Hazard of overexposure-Eye ContactSolid or dust may cause irritation or corneal injury due tomechanical action-Skin ContactEssentially nonirritating to skin, Mechanical injury only-Skin AbsorptionUnlikely due to physical properties-IngestionUnlikely due to physical may cause irritation to respiratoryIn case of breathing, fumes released from heated materialmay cause respiratory irritation-Chronic EffectsNot Available-MutagenicityNot AvailableContents9010-94-0 98 - 100%CAS Number(MATERIAL SAFETY DATA SHEET)Revised Date1999. 08. 20 Revised ItemMSDSFile NumberIssue Date1997.

3 04. 12 Page1/30 - 1%0 - 1%LG Chemical LimitedLG Twin Tower / East Wing20, Yoido-dong, Youngdungpo-guSeoul 150-721 KoreaTel : 822-3773-7449, 3634 Fax : 822-3773-7692, 7652 MSDS- ABS TR-558AI Grade : TR-558AI5. First Aid ContactImmediately rinse eyes with copious amount of running waterand seek medical ContactEssentially nonirritating to skin but rinse with copious water vomiting occurs, lower the head to ease vomiting and seek for medical case of breathing, fumes released from heated material maycause respiratory irritationIn case of inhaling dense smoke, immediately remove aperson to fresh air.

4 If necessary, apply artificial respirationand seek medical attention Available6. Fire & Explosion Hazard PointNot " HB (UL-94. File No. E-6717M) Ignition PointNot MediaUsually use water and use extinguishing media appropriate to surrounding Fire Fighting ProcedureCool Containers with water spray. In closed stores, provide firefighter with self-contained breathing apparatus in positive pressure Fire and Explosion HazardsIrritating gases and dense smoke7. Reactivity under normal conditions to avoidAvoid fire and heating above decomposition productsNot polymerizationNot occur8.

5 Spill or Leak MethodSweep, use vacuum cleaner, or shovel into intact packagingfor waste disposal or possible Disposal MethodReuse or transfer to an approved disposal all federal, state, or local regulations upon dispositionMSDSFile NumberRevised Date1999. 08. 20 Page2/3 MSDS- ABS TR-558AI Grade : TR-558AI9. Special Protection protect respirator (fumes released from heated material) necessary, use protective equipment handling this & formation of dustKeep bags always closed / Keep container lightly closedAvoid pellets / bags from getting bags / containers in a well-ventilated placeAvoid pellets / bags from getting InformationProduct should be handled, stored, and used in accordance with the generally accepted industrial hygienepractices and in conformity with all the applicable legal regulations.

6 The information provided herein is based on the knowledge possessed at this present time from the view point of safety should, therefore, not be construed as guaranteeing specific NumberRevised Date1999. 08. 20