n 100 3 2 2 4 W C Trimming Potentiometer - Bourns

1 (.208) (.007) (.028) (.040) (.032) (.200) (.190) (.050) (.100) (.114) (.139) (.060) (.155) (.100) (.103) (.047) (.079) (.032)2 (.050)2 (.061)ADJUSTMENT SLOT (.022)WIDE (.020) (.208) (.007) (.040) (.200) (.190) (.100) (.100) (.200) (.139) (.032) (.050) (.225) (.155) (.047)2 PLCS3 (.079) (.032)2 (.050)2 (.075)ADJUSTMENT SLOT (.022)WIDE (.020) (.079) (.157) (.195) (.146) (.032) (.090) (.190) (.060) (.102) (.047) (.095) (.180) (.007) (.090) (.079) (.050)2 PLCS. 3 (.034)2 (.050) (.039) (.020) (.045) (.007)2 SLOT (.022)WIDE (.020) (.205) (.050) (.090) (.079) (.050) (.090) (.190) (.060) (.108) (.)

2 047) (.095) (.180) (.236) (.005) (.152) (.020) PLCS. ADJUSTMENT SLOT (.022)WIDE (.020) (.034)2 (.050) (.020) (.007)Featuresn Surface Mount 4 mm Square / Multiturn Cermet / Industrial / Sealedn Halogen free** with date code 114 n Sealed to withstand board wash processingn Pick and place centering design, with flush adjustmentn 4mm design meets EIA/EIAJ/IPC/VECI SMD standard trimmer footprintn Low CRV - 1 %n RoHS compliant* - see processing information on RoHS compliant surface mount trimmersn For trimmer applications/processing guidelines, click here 3224 - 4 mm SMD Trimpot Trimming Potentiometer Electrical CharacteristicsStandard Resistance Range.

3 10 to 2 megohm (see standard resistance table)Resistance Tolerance .. 10 % Min. Resistance ..1 % or ohms (whichever is greater)Contact Resistance Variation ..1 % or 3 ohms ..Essentially InfiniteInsulation Resistance ..500 vdc. 100 megohms Strength Sea Level ..600 vac (1 minute)Adjustment Angle ..12 turns nom. Environmental CharacteristicsPower Rating (300 volts max.) 85 C .. watt 150 C ..0 wattTemperature Range ..-65 C to +150 CTemperature Coefficient .. 100 ppm/ CSeal Test ..85 C Fluorinert /60 secondsHumidity ..MIL-STD 202 Method 106 TRS 2 %; IR 10 megohmsVibration.

4 20 G TRS 1 %; VRS 1 %Shock ..100 G TRS 1 %; VRS 1 %Load Life ..@ 85 C rated power 1,000 hoursTRS ..3 ohms or 3 % (whichever is greater)Rotational Cycling ..200 cyclesTRS ..3 ohms or 3 % (whichever is greater)Thermal Shock ..5 cycles TRS 2 %; VRS 1 %Moisture Sensitivity Level ..N/AESD Classification ..2 Physical CharacteristicsMechanical Stop ..Wiper idlesTorque ..180 g-cm ..Approximately ..Manufacturer s code, resistance code and date codeSolderability ..Per MIL-STD-202, Method 208 Wiper ..50 % (Actual TR) 10 %Flammability ..UL94V0 Pushover Strength J, G .. lbs. W, X ..1 Tool ..H-91 Product DimensionsDIMENSIONS: MM (INCHES)13 CWCLOCKWISECCW2 WIPER*RoHS COMPLIANTLEAD FREE*RoHS COMPLIANTVERSIONSAVAILABLELEAD FREE VERSIONS ARE RoHS COMPLIANT**RoHS Directive 2002/95/EC Jan.

5 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. ** Bourns follows the prevailing definition of halogen free in the industry. Bourns considers a product to be halo-gen free if (a) the Bromine (Br ) content is 900 ppm or less; (b) the Chlorine ( Cl ) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine ( Cl ) content is 1500 ppm or less. Fluorinert is a registered trademark of 3M are subject to change without should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at 2 2 4 W8 1 1 CTOLERANCES: EXCEPT WHERE NOTED (.)

6 010)DIMENSIONS: MM (INCHES)3224 - 4 mm SMD Trimpot Trimming PotentiometerAdditional Featuresn Top and side adjust stylesn J-hook, and gull-wingJ & G StylesW StyleX StyleW & X Style ReelPackaging .05(.295 .002) .10(.472 .004) .12(.159 .005) .10(.193 .004).05(.002) (.240) .30(.630 .012) + .10/ .00(.059 + .004/ .000) .20(.157 .008) .05(.079 .002) .10(.069 .004) + (.646 .070/ )REELC over tape peel strength: Meets EIA specification 481.*Embossed Tape Designator "E"**Embossed Tape Designator "G" (See How To Order chart for further information.) (.295) (.472) (.264).35(.

7 014) (.250) (.630 .012) (.339) + .10/ .00(.059 + .004/ .000) (.157) (.079) (.069) 178 ( .008) .51(.512 .020) .25(.070 .010) .79(.827 .031) .25(.105 .010) ( .080) + (.488 + .079/ ) (.177) .05(.217 .002) + .10/ .00(.059 + .004/ .000) .20(.157 .008) .05(.079 .002) .10(.315 .004) .10(.069 .004) .30(.472 .012) .10 (.201 .004) .10(.219 .004) .10 (.246 .004) (.002)MAX.(J)(G) SPACED3 * ( .008)DIA.**Cover tape peel strength: Meets EIA specification 481.*Embossed Tape Designator "E"**Embossed Tape Designator "G" (See How To Order chart for further information.

8 Standard Resistance TableResistanceResistance (Ohms) Code10100 20200 50500100101 200201 500501 1,000 102 2,000 202 Popular distribution values listed in boldface. Special resistances (Ohms) Code 5,000 502 10,000 103 20,000 203 50,000 503 100,000 104 200,000 204 500,000 504 1,000,000 105 2,000,000 205 How To Order3224 J - 1 - 502 EModelStyleStandard or Modified Product Indicator -1= IR Reflow (standard) -2= Wave Solderable -FW5=.

9 070 .010 Shaft ExtensionResistance CodeEmbossed Tape Designator E = Style J, G: 500 reel (standard) Style W: 250 reel (standard) Style X: 200 reel (standard) G = Style J, G: 1500 reel (standard) Style W: 1000 reel (standard) Style X: 850 reel (standard) Blank = Style J, G: 1500 reel (FW5) Style W, X: 600 reel (FW5)Consult factory for other available options. -2 has a treated stainless steel and reel material meets Antistatic ANSI/ESD 5541-2003 packaging 07/18 Trimpot is a registered trademark of Bourns , Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications.

10 The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at Disclaimer NoticeThis legal disclaimer applies to purchasers and users of Bourns products manufactured by or on behalf of Bourns , Inc. and its affiliates (collectively, Bourns ).Unless otherwise expressly indicated in writing, Bourns products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns characteristics and parameters of a Bourns product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns knowledge of typical requirements in generic applications.