n Construction

1 ConstructionSikadur AnchorFix-1 Modified-acrylic anchoring adhesiveDescriptionSikadur AnchorFix-1 is a two-component, solvent- and styrene-free, modified-acrylic anchoring to UseAs a fast-curing anchoring adhesive for all grades of rebars, threaded rods, bolts and special fastening in concrete and masonry base sensitivity to mixing , solvent-freenLow be dispensed/mixed with a standard, good quality caulking gun or sausage (300 ml) or 20 (550 ml) two-component collapsible cartridge in cartridge system. Ready-to-usewith a standard, good quality caulking gun (10 ) or sausage gun (20 ).Gel and Curing TimesCautionIRRITANT: Possible sensitization/allergic reaction possible with prolonged AidEyes: Rinse for 15 minutes; Skin: Wash with soap and water; Inhalation: Move to fresh air; Ingestion: Ifswallowed, do not induce vomiting.

2 Contact a physician immediately with all cases if symptoms or LeakVentilate area. Collect with absorbent material. Wear proper personal protective equipment. Dispose of inaccordance with local, state and federal environmental and StorageAvoid direct contact. Wear protective equipment (chemical resistant gloves/goggles/clothing) to prevent directcontact with skin and eyes. Remove any contaminated clothing after use. Use adequate ventilation. If adequateventilation is unavailable, open doors and windows and use an NIOSH approved respirator. Wash skin and handsafter Data SheetEdition no. C370 Sikadur AnchorFix-11) Allowable loads are based on a minimum safetyfactor of 3. Higher factors of safety may be war-ranted depending on actual application and job ) Minimum concrete base material thickness mustbe times the anchor embedment ) Allowable load of adhesive anchor must be thelesser of bond or steel Capacities - Threaded Rod**For information on the effects of Anchor Spacing andEdge Distance on adhesive anchor performance, pleasecontact Sika s Technical Service TemperatureGel TimeCure Time86 F (30 C)3 F (20 C)7 F (10 C)22 F (5 C)50 F (-10 C)80 DataShelf LifeBest when used within 12 months of manufacturing ConditionsStore dry in original unopened packaging in cool conditionsat 40 -80 F (4-27 C)

3 And out of direct A + B mixed: uniform grayMixing RatioComponent A :Component B = 10:1 by volumeConsistencyComp. A + B mixed: non-sag, creamy pasteApplication TemperaturesSubstrate and ambient: 14 -86 F (-10 -30 C)Density (Mixed) ( kg/l)AnchorDiameter(in.)Drill BitDiameter(in.)EmbedmentDepth(in.)Allow able TensileBond Strength ,000 psi ( ) Concrete(lbs.)AllowableTensile BondStrength ,000 psi ( ) Concrete(lbs.)Allowable Shear Load> 2,000 psi( MPa) Concrete(lbs.)3/87/162-1/43-1/24-1/26201 ,2851,4008701,8401,9953351,1251,1251/29/ 1634-1/469251,6351,8551,3002,3402,600800 2,0002,0005/83/43-3/457-1/21,5452,3103,0 851,9853,3003,9709403,1303,1303/47/84-1/ 26-3/492,4503,3954,6103,4354,8506,4251,3 504,5054,50511-1/868-1/4123,6404,2105,82 55,1006,0208,7402,4008,0108,010 ConstructionKEEP CARTRIDGE TIGHTLY CLOSEDKEEP OUT OF REACH OF CHILDRENNOT FOR INTERNAL CONSUMPTIONFOR INDUSTRIAL USE ONLYCONSULT MATERIAL SAFETY DATA SHEET FOR MORE INFORMATIONSika warrants this product for one year from date of installation to be free from manufacturing defects and to meet the technical properties on the currenttechnical data sheet if used as directed within shelf life.

4 User determines suitability of product for intended use and assumes all risks. Buyer s sole remedyshall be limited to the purchase price or replacement of product exclusive of labor or cost of OTHER WARRANTIES EXPRESS OR IMPLIED SHALL APPLY INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL our website at NATIONWIDER egional Information and Sales Centers. For the location of your nearest Sika sales office, contact your regional CorporationSika Canada Mexicana de Polito Avenue601 Delmar AvenueCarretera Libre Celaya Km. , NJ 07071 Pointe ClaireCorregidora, QueretaroPhone: 800-933-7452 Quebec H9R 76920 136 Fax: 201-933-6225 Phone: 514-697-2610 Phone: 52 42 25 0122 Fax: 514-694-2792 Fax: 52 42 25 0537 Sika and Sikadur are registeredtrademarks.

5 Made in USA. Printed in Capacities - Reinforcing Bar1) Allowable loads are based on a minimumsafety factor of 3. Higher factors of safety maybe warranted depending on actual applicationand job site ) Minimum concrete base material thicknessmust be times the anchorembedment ) Allowable load of adhesive anchor must bethe lesser of bond or steel strength.**For information on the effects of Anchor Spacingand Edge Distance on adhesive anchor performance,please contact Sika s Technical Service of UseSolid Base Material43157891 Drill the hole tothe correct di-ameter anddepth. This canbe done with ei-ther a hammer drill or rotary-only machine depending uponthe the static mix-ing the car-tridge into theapplicatorgun.

6 Dispensethe first part ofthe adhesive to waste until a uni-form color is mixer nozzle to thefar end of the perforatedsleeve and completely fillthe sleeve with resin. With-draw the mixer nozzle asthe sleeve insert the anchor-ing hardware. This should bedone slowly with a slight twist-ing motion. Leave the anchorundisturbed until the cure timehas elapsed, then attach the fix-ture and tighten the the hole to thecorrect diameter anddepth using a rotaryhammer the hole clean with com-pressed air, brush clean witha nylon brush and blow the the bags to removethe red plugAttach the static the car-tridge into theapplicator thefirst part of the adhesive to wasteuntil a uniform color is insertthe anchor should bedone slowly witha slight twistingmotion.

7 Excessresin should be removed from themouth of the hole before it the an-chor undis-turbed untilcuring timehas elapsed,then attach the fixture and tightenthe the red the mixernozzle to the farend of the holeand half fill hole (depending uponapplication). Withdraw nozzle asyou fill the hole. For deep holesextension tubing can be the bags to removethe red the correctperforated the the hole clean withcompressed air, brushclean with a nylon brushand blow clean Base MaterialRebar Size(Diameter)Drill BitDiameter(in.)EmbedmentDepth(in.)Allow able TensileBond Strength ,000 psi ( MPa)Concrete (lbs.)Allowable TensileBond Strength ,000 psi ( MPa)Concrete (lbs.)

8 Allowable Shear Load> 2,000 psi( ) Concrete(lbs.)No. 3(3/8")1/23-3/87501,0701,190No. 4(1/2")5/84-1/21,3451,9251,970No. 5(5/8")3/45-5/81,9452,7802,940No. 6(3/4")7/86-3/42,5503,6404,110No. 7(7/8")17-7/83,1454,4955,450No. 8(1")1-1/893,7455,3557,030