NEW 0.5mm pitch, 0.9mm above the board, Flexible …

1 Pitch, above the board , Flexible printed circuit & Flexible flat Cable ZIF ConnectorsFH19C & FH19SC Series 1. Low-profile pitch FPC/FFC ConnectorsMiniaturization of portable equipment and personal mobiledevices has created increased demand for a low profile,high density, and high reliability connectors.*The design of this connector has been made thinner andsmaller, with a height of and width of 3mm. *PCB footprint: Reduced approximately 48% (as compared withHirose Electric's pitch FH12 Series connectors) *Connector weight: Reduced approximately 78% (as comparedwith Hirose Electric's pitch FH12 Series connectors)2.

2 Conductive traces on the PCB can run underthe connectorAll bottom surface of the connector is solid, without anyexposure of the Proven Flip-Lock Actuator System assureseasy and reliable operationRotating actuator permits easy insertion and reliableconnection with the FPC & sensation confirms complete mechanical locking ofthe actuator and the electrical Accepts & thick FPC/FFC No exposed contacts on the bottom of the connector will also terminate with thick FlatFlexible Cable (FFC).5. board placement with automatic equipment flat top surface and packaged on the tape-and-reel allowsuse of vacuum reel contains 5,000 pieces.

3 ApplicationsNotebook PC s, PDA s, digital cameras and other compactdevices requiring interconnections of the main circuit boardwith the LCD, plasma display (PDP), HDD or other compactdevices requiring FPC/FFC connections using low profile,high reliability ZIF Can be mounted over conductive traces high Metal Fittings (Leadless Type) No protrusions on the sidesallows close side-by-sideboard fittings (Leadless) Enclosed construction(No exposed contacts) FH19C FPC/FFC thickness: color: BrownActuator color: BlackFH19SC FPC/FFC thickness: Actuator Temporary Hold Mechanism Actuator stays open during insertion of the FPC/FFC.

4 FeaturesThe product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at , or contact your Hirose sales C - 30S - SH (05)124536 Product SpecificationsRatingCurrent rating A DCVoltage rating 50 V ACOperating temperature range-55 to +85 (Note 2) Operating humidity rangeRelative humidity 90% max. (No condensation) Storage temperature range-10 to +50 (Note 3) Storage humidity rangeRelative humidity 90% max. MaterialsNote 1: When passing the current through all of the contacts, use 70% of the current 2: Includes temperature rise caused by current 3: The term storage refers to products stored for long period of time prior to mounting and use.

5 Operating Temperature Range andHumidity range covers non- conducting condition of installed connectors in storage, shipment or during 4: When FPC is gold plated, the connector contacts must be also gold plated: Select the (05) Insulation resistance 500 M ohms V DC 2. Withstanding voltage No flashover or insulation breakdown 150 V AC/1 minute3. Contact resistance 100 m ohms mA*Including FPC/FFC conductor resistance 4. Durability Contact resistance: 100 m ohms cycles(insertion/ withdrawal)No damage, cracks, or parts electrical discontinuity of 1 s or VibrationContact resistance: 100 m ohms damage, cracks, or parts electrical discontinuity of 1 s.

6 ShockContact resistance: 100 m ohms damage, cracks, or parts dislocation. 7. HumidityContact resistance: 100 m ohms max.(Steady state)Insulation resistance: 100 M ohms damage, cracks, or parts resistance: 100 m ohms Temperature cycle Insulation resistance: 100 M ohms damage, cracks, or parts Resistance to No deformation of components affecting : At the recommended temperature profilesoldering heatManual soldering: 350 5 for 5 seconds96 hours at temperature of 40 and humidity of90 to 95%Temperature: -55 / +15 to +35 / +85 /+15 to +35 Time:-30/ 2 to 3/ +30/2 to 3(Minutes)5 cyclesAcceleration of 981 m/s2, 6 ms duration, sine half-wave waveform, 3 cycles in each of the 3.

7 10 to 55 Hz, single amplitude , 10 cycles in each of the 3 directions Ordering informationSeries name :FH19C :FPC/FFC thickness : :FPC/FFC thickness : of contacts :4 to 50 Contact pitch Terminal typeSH: SMT horizontal mounting typeMaterial and plating specifications : 142536 Recommended FPC, FFCFH19C SeriesFH19SC SeriesThickness: = Gold or tin-lead plated (Note 3)Thickness: = Gold or tin-lead plated (Note 3)InsulatorLCPC olor: BeigeActuatorPPS/LCPUL94V-0 Contacts Phosphor bronzeGold flash or Tin-lead plated (Note 4)-------Metal fittingsPhosphor bronze Pure tin reflow plated -------Part MaterialFinishRemarksColor: Brown (FH19C Series)Color: Black (FH19SC Series)Actuator materialPPS------------(05)(51)--------- ---LCP(05)(51)------------(05)(51)FH19 CFH19SC4 to 10 to 50 : Gold flash platedContact: Tin-lead platedContact: Gold flash platedContact: Tin-lead platedContact: Gold flash platedContact: Tin-lead platedThe product information in this catalog is for reference only.

8 Please request the Engineering Drawing for the most current and accurate design non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at , or contact your Hirose sales Connector Dimension[FH19C Series]Notes The coplanarity of each terminal lead and metal fitting is within contact terminal lead position indicates the dimension from the bottom surface of the insulator body. Difference between terminal contact to be max. discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. Note that preventive hole for sink mark could be added for (1) ( ) (C: FPC insertion slot dimension)( )( ) + 0( ) (Including contact terminal leads) ( )(130 ) mark indicator Number of contacts indicator G Number of contacts Unit: mm Note1: Embossed tape reel packaging (5,000 pieces/reel).

9 Order by number of reels. Note2: When selecting the RoHScompliant code (05) as gold plated (51) is not RoHS (**) (**) (**) (**) (**) (**) (**) (**) (**) (**) (**) (**) (**) (**) (**) (**) (**)CL **CL580-0409-2-**CL580-0411-4-**CL580-04 04-9-**CL580-0403-6-**CL580-0412-7-**CL5 80-0413-0-**CL580-0405-1-**CL580-0406-4- **CL580-0408-0-**CL580-0402-3-**CL580-04 14-2-**CL580-0407-7-**CL580-0401-0-**CL5 80-0400-8-**CL580-0416-8-**CL580-0417-0- **Number of (Note2)The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design non-RoHS products have been discontinued, or will be discontinued soon.

10 Please check the products status on the Hirose website RoHS search at , or contact your Hirose sales mark indicator Number of contacts indicator (130 ) GD (1) ( )G Number of contacts (C: FPC insertion slot dimension)( )( ) + 0( ) (Including contact terminal leads) ( ) [FH19SC Series]Unit: mm Note1: Embossed tape reel packaging (5,000 pieces/reel) .Order by number of : When selecting the RoHScompliant code (05) as gold plated (51) is not RoHS The coplanarity of each terminal lead and metal fitting is within contact terminal lead position indicates the dimension from the bottom surface of the insulator body. Difference between terminal contact to be max.