Example: tourism industry

NFS-3030 Addressable Fire Alarm System

DN-6880 10/11/05 Page 1 of 8 GeneralThe NFS-3030 is an intelligent fire Alarm control Panel de-signed for medium- to large-scale facilities. fire emergencydetection and evacuation are extremely critical to life safety,and the NFS-3030 is ideally suited for these applications. TheNFS-3030 is part of the ONYX Series of products NFS-3030 is ideal for virtually any application because itfeatures a modular design that is configured per project require-ments. With one to ten Signaling Line Circuits (SLCs), the NFS-3030 supports up to 3,180 intelligent Addressable is critical to fire evacuation personnel, and theNFS-3030 s large 640-character Liquid Crystal Display (LCD)presents vital information to operators concerning a fire situ-ation, fire progression, and evacuation host of other options are available, including single- ormultichannel voice; firefighters telephone; LED, LCD, or PC-based graphic annunciators; fire or integration networking;advanced detection products for challenging environments,and many additional One to ten isolated intelligent S

The NFS-3030 is an intelligent Fire Alarm Control Panel de-signed for medium- to large-scale facilities. Fire emergency detection and evacuation are extremely critical to life safety, and the NFS-3030 is ideally suited for these applications. The NFS-3030 is part of the ONYX® Series of products from NOTIFIER.

Tags:

  Control, Fire, Panels, Lamar, Fire alarm control panel, Fire alarm

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of NFS-3030 Addressable Fire Alarm System

1 DN-6880 10/11/05 Page 1 of 8 GeneralThe NFS-3030 is an intelligent fire Alarm control Panel de-signed for medium- to large-scale facilities. fire emergencydetection and evacuation are extremely critical to life safety,and the NFS-3030 is ideally suited for these applications. TheNFS-3030 is part of the ONYX Series of products NFS-3030 is ideal for virtually any application because itfeatures a modular design that is configured per project require-ments. With one to ten Signaling Line Circuits (SLCs), the NFS-3030 supports up to 3,180 intelligent Addressable is critical to fire evacuation personnel, and theNFS-3030 s large 640-character Liquid Crystal Display (LCD)presents vital information to operators concerning a fire situ-ation, fire progression, and evacuation host of other options are available, including single- ormultichannel voice; firefighters telephone; LED, LCD, or PC-based graphic annunciators; fire or integration networking;advanced detection products for challenging environments,and many additional One to ten isolated intelligent Signaling Line Circuits (SLC)Style 4, 6 or 7.

2 Up to 159 detectors (any mix of ion, photo, laser photo,thermal, or multi-sensor) and 159 modules ( manualstations, two-wire smoke, notification, or relay) per devices per loop/3180 per FACP or network node. Large 640-character LCD backlit display (16 lines x 40 char-acters) or display-less (a node on a network). Network option supports NFS-640, NFS-3030 , NCA Net-work Annunciator, or NCS Network control Station. UniNet compatible. Built-in Alarm , Trouble, Security, and Supervisory relays. VeriFire Tools online/offline program option. Application code is saved in Flash memory, eliminating theneed to change EPROMs. Built-in Degraded Mode option. In the event of a CPU fail-ure, the System is capable of general Alarm if a fire condi-tion is present.

3 Weekly Occupancy Schedules allow changing sensitivityby time of day and day of week. Optional universal 2040-point DACT. EIA-485 annunciators, including custom graphics. Printer interface (80-column and 40-column printers). History file with 4000-event capacity in nonvolatile memory,plus separate 1000-event Alarm -only file. Advanced history filters allow sorting by event, time, date,or address. Alarm Verification selection per point, with tally. Autoprogramming and Walk Test reports. Positive Alarm Sequence (PAS) Presignal. Silence inhibit and Auto Silence timer options. March time and temporal signals supported on panel circuits. Field-programmable on panel or on PC, with VeriFire Tools program, also check, compare.

4 Non- Alarm points for lower priority functions. Remote ACK/Signal Silence/ System Reset/Drill via moni-tor modules. Powerful Boolean logic equations 1000! Supports SCS Series smoke control System in both HVACor FSCS modes. EIA-232 printer port. EIA-485 annunciator IntelligentAddressable fire Alarm SystemOctober 11, 2005DN-6880 A-20 Section: Intelligent fire Alarm control PanelsAcclimate Plus , HARSH , and NOTI fire NET are trade-marks, and NOTIFIER , FlashScan , ONYX , UniNet , VIEW ,and VeriFire are registered trademarks of Honeywell Interna-tional Inc. Microsoft and Windows are registered trademarksof the Microsoft Corporation. LEXAN is a registered trademarkof GE Plastics, a subsidiary of General Electric shown in CAB-C4 backboxwith 640-character displayS6357165-0028:2247170-0028:223 CaliforniaState FireMarshalCS118 Vol.

5 25/S635 Vol. 46 MEA345-02-ECity ofDENVERMade in the document is not intended to be used for installation purposes. We try to keep ourproduct information up-to-date and accurate. We cannot cover all specific applicationsor anticipate all requirements. All specifications are subject to change without more information, contact NOTIFIER. Phone: (203) 484-7161 FAX: (203) 484-711812 Clintonville Road, Northford, Connecticut 06472 CCCFC ertif. # 2003081801000816 Page 2 of 8 DN-6880 10/11/05 Sample System 640-character display features: Backlit, 640-character display. Program keypad: full QWERTY keypad. Up to nine users, each with a password and selectableaccess levels. 10 LED indicators: Power; fire Alarm ; Pre- Alarm ; Se-curity; Supervisory; System Trouble; Other Event; Sig-nals Silenced; Point Disabled; CPU Failure.

6 Membrane Switch Controls: Acknowledge; Signal Si-lence; Drill; System Reset; Lamp Test. LCD Display: 640 characters (16 x 40) with long-lifeLED backlight. FlashScan intelligent features: Poll 318 devices on each loop in less than two seconds. Activate up to 159 outputs in less than five seconds. Multicolor LEDs blink device address during Walk Test. Fully digital, high-precision protocol ( Patent5,539,389). Manual sensitivity adjustment nine levels. Pre- Alarm intelligent sensing nine levels. Sensitivity windows:Ion to to (VIEW ) to Plus to to obscuration. Drift compensation ( Patent 5,764,142). Multi-detector algorithm involves nearby detectors inalarm decision ( Patent 5,627,515).

7 Automatic detector sensitivity testing. Maintenance alert (two levels). Self-optimizing pre- Alarm . Programmable activation of sounder/relay bases dur-ing Alarm or pre- Alarm . Read Status displays the level of detector cleanliness. VIEW Very Intelligent Early Warning smoke detectiontechnology: Revolutionary spot laser design. Advanced intelligent sensing algorithms differentiate be-tween smoke and non-smoke signals ( Patent5,831,524). Addressable operation pinpoints the fire location. No moving parts to fail or filters to change. Early warning performance comparable to the best as-piration systems at a fraction of the lifetime cost. Acclimate Plus low-profile intelligent multi-sensor: Detector automatically adjusts sensitivity levels with-out operator intervention or programming.

8 Sensitivityincreases with heat. Microprocessor-based technology; combination photoand thermal technology. Low-temperature signal at 40 F 5 F ( C C). RFX Wireless Interface System : Allows protection in areas where the use of wire is un-economical or unpractical. Allows communication with wireless smoke detectorsand wireless monitor modules; each RFX unit and de-tector is assigned an address. Requires 24 VDC from SLC or System auxiliary power. HARSH Hostile-Area Smoke Head: Provides early warning of smoke detection in environmentwhere traditional smoke detectors are not practical. The detector s filters remove particulates down to 30microns in size. Intake fan draws air into photo chamber, while airborneparticles and water mist are removed.

9 Requires auxiliary 24 VDC from System or remote 10/11/05 Page 3 of 8 Autoprogram Confirmation screen (SLCs) Releasing features: Ten independent hazards. Sophisticated cross-zone (three options). Delay timer and Discharge timers (adjustable). Abort (four options). Voice and telephone features: Solid state message generation. Hard-wired voice control module options. Firefighter telephone option. 30- to 120-watt high-efficiency amplifiers (AA Series). Backup tone generator and amplifier option. Multichannel voice transponder (XPIQ).FlashScan Exclusive NewWorld-Leading Detector ProtocolAt the heart of the NFS-3030 is a set of detection devicesand device protocol FlashScan ( Patent 5,539,389).FlashScan is an all-digital protocol that gives superior pre-cision and high noise well as giving quick identification of an active input de-vice, this new protocol can also activate many output devicesin a fraction of the time required by competitive high speed also allows the NFS-3030 to have the larg-est device per loop capacity in the industry 318 points yet every input and output device is sampled in less than twoseconds.

10 The microprocessor-based FlashScan detectorshave bicolor LEDs that can be coded to provide diagnosticinformation, such as device address during Walk SensingIntelligent sensing is a set of software algorithms that pro-vide the NFS-3030 with industry-leading smoke detection ca-pability. These complex algorithms require many calculationson each reading of each detector, and are made possible bythe very high-speed microcomputer used by the Compensation and Smoothing. Drift com-pensation allows the detector to retain its original ability todetect actual smoke, and resist false alarms, even as dirt ac-cumulates. It reduces maintenance requirements by allow-ing the System to automatically perform the periodic sensitiv-ity measurements required by NFPA Code 72.


Related search queries