NISTCAL-PG1 SERIES SGY & SGZ 2.5˝ INDUSTRIAL …

1 SPECIFICATIONSS ervice: Compatible gases and Materials: SGZ: 316 L SS Tube, 316 SS connector; SGY: Brass connection, bronze : 304 : : Limit: FS Limits: -4 to 140 F (-20 to 60 C).Size: (63 mm).Process Connections: 1/4 male : oz (141 g) bottom, oz (164 g) back. Add oz (104 g) for glycerin INDUSTRIAL PRESSURE FS Accuracy, 316 SS or Brass Wetted Parts, Dual PSI/Bar x100 kPa ScalesThe SERIES SGY & SGZ Gages have dual psi and bar (x100 kPa) scales with full-scale accuracy. The SERIES SGZ and SGY gages are designed with 304 SS housings and the SGZ is designed with 316 SS wetted parts for excellent chemical compatibility or SGY brass wetted parts for compatible gases. These gages cover a wide variety of ranges in either bottom or back connection configurations. SERIES SGZ gages employ an easy-open breather plug on top, which allows liquid filled units to breathe, relieving any built up internal pressures.

2 Plug easily pops open and does not need to be entirely removed or cut like a typical gages rubber plug Stainless steel housing and wetted parts to resist ambient corrosion for longer service life in harsh environments Higher accuracy gage for value-sensitive applications requiring more precise measurement and where vibration is a concern Optional sliding pointer clearly mark to make visible critical ranges and high and low points Liquid fillable gage with easy open breather plug provides smoother damped movement of pointer Back or bottom mounting and compact size provides for mounting with dimensional limitationsAPPLICATIONS Vacuums in pneumatic conveying lines Positive pressure in compressed air headers Corrosive ambient environments2-1/16[ ]2-41/64[ ]2-7/16[ ]1/4 NPT25/64[ ]1-5/32[ ]2-41/64[ ]31/32[ ]1-13/64[ ]1/4 NPT2-7/16[ ]63/64[ ]SGZ BottomSGZ Back withAccessory PointersSGY BottomSGY Backwith Accessory PointersSPECIFICATIONSS ervice: Compatible gases and Materials: SG1: Brass connector, bronze tube; SG3: 316 L SS tube, 316 SS : 304 : : Limit: FS Limits: -4 to 140 F (-20 to 60 C).

3 Size: (40 mm).Process Connections: 1/8 male : SG1: oz (63 g) bottom, oz (65 g) back; SG3: oz (70 g) bottom, oz (72 g) SERIES SG1 Gages are perfect for applications where resistance to corrosion is necessary. The stainless steel case and ring offer excellent protection from harsh processes. The SG1 gages are an economical choice where ambient corrosion and vibration are a concern. Gages are suitable for all fluids that are compatible with brass and bronze, and are available with bottom or back SERIES SG3 Gages have dual psi and bar (x100 kPa) scales with full-scale accuracy. The SERIES SG3 gages are designed with 304 SS housings and 316 SS wetted parts for excellent chemical compatibility. These gages cover a wide variety of ranges from full vacuum to 300 psi. Units can withstand ambient temperatures up to 140 F (60 C). Bottom or back 1/8 NPT connection options Stainless steel housing to resist ambient corrosion for longer service life in harsh environments Good accuracy gage for value-sensitive applications requiring more precise measurement and where vibration is a concern Back or bottom mounting and compact size provides for mounting with dimensional limitationsAPPLICATIONS Vacuums in pneumatic conveying lines Positive pressure in compressed air headers Corrosive ambient INDUSTRIAL PRESSURE FS Accuracy, 316 SS or Brass Wetted Parts, Dual PSI/Bar x100 kPa Scales1-7/16[ ]1-27/32[ ]1-39/64[ ]1/8 NPT23/64 [ ]1-1/32[ ]PRESSURERELIEF VENT1-39/64[ ]1/8 NPTPRESSURERELIEF VENT1-27/32[ ]41/64[ ]53/64[ ]1-1/32[ ]SG1 BottomSG1 BackSG3 BottomSG3 BackSingle Pressure Gages,DialPRESSUREDWYER INSTRUMENTS, INC.

4 | SGY & SGZSERIES SG1 & SG3 USA: California Proposition 65 WARNING: Cancer and Reproductive Harm - : California Proposition 65 WARNING: Cancer and Reproductive Harm - order code:DescriptionNISTCAL-PG1 NIST traceable calibration certificateACCESSORIESM odelDescriptionA-445DA-499RA-499YA-499GU -bracket mounting kit for gageRed sliding color pointer Yellow sliding color pointer Green sliding color pointer MODEL CHARTM odelRange ModelRangeSGZ-D10122 NSGZ-D10322 NSGZ-D10422 NSGZ-D10522 NSGZ-D10622 NSGZ-D10722 NSGZ-D11022 NSGZ-D11122 NSGZ-D11222N30 Hg to 00 to 30 psi0 to 60 psi0 to 100 psi0 to 160 psi0 to 200 psi0 to 300 psi0 to 500 psi0 to 1000 psiSGY-D10122 NSGY-D10322 NSGY-D10422 NSGY-D10522 NSGY-D10622 NSGY-D10722 NSGY-D11022 NSGY-D11122 NSGY-D11222N30 Hg to 00 to 30 psi0 to 60 psi0 to 100 psi0 to 160 psi0 to 200 psi0 to 300 psi0 to 500 psi0 to 1000 psiNote: To order with glycerin fill, add -GF to the end of the model.

5 For back connect, change 22N to order code:DescriptionNISTCAL-PG1 NIST traceable calibration certificateACCESSORIESM odelDescriptionA-445BU-bracket mounting kit for and gageMODEL CHARTM odelRangeModelRangeSG1-B10121 NSG1-B10321 NSG1-B10421 NSG1-B10521 NSG1-B10621 NSG1-B10721 NSG1-B11021N0 to 30 Hg0 to 30 psi0 to 60 psi0 to 100 psi0 to 160 psi0 to 200 psi0 to 300 psiSG3-B10121 NSG3-B10321 NSG3-B10421 NSG3-B10521 NSG3-B10621 NSG3-B10721 NSG3-B11021N30 Hg to 00 to 30 psi0 to 60 psi0 to 100 psi0 to 160 psi0 to 200 psi0 to 300 psiNote: For SG1 back connect, change 21N to SG3 back connect, change 21N to 41N.