Example: biology

Non-licensed tasks What this sheet covers

Health and Safety Executive1 of 2 pagesEquipment and method sheetWhat this sheet coversThis sheet is intended for trained contractors who remove textured sets out a model statement to issue to the client, premises owner or the statement of cleanliness is normally only required for large-scale removal and if an enclosure is After removing textured coating , you need to let the client know the premises are safe to use again. Before you do this you need to be sure that textured coating has been removed, as agreed, and all debris cleaned up. The next page shows an example of a form to give to the client, premises owner or of cleanliness after textured coating removalem 10asbestos essentialsNon-licensed tasksThis information will help employers and the self-employed to comply with the Control of Asbestos Regulations is also useful for trade union and employee safety information about health and safety, or to report inconsistencies or inaccuracies in this guidance, visit You can view HSE guidance online and order priced publications from the website.

2 of 2 pages Health and Safety Executive em10 – Statement of cleanliness after textured coating removal Regarding the removal of textured coating from …

Tags:

  Coating, Textured, Textured coating

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of Non-licensed tasks What this sheet covers

1 Health and Safety Executive1 of 2 pagesEquipment and method sheetWhat this sheet coversThis sheet is intended for trained contractors who remove textured sets out a model statement to issue to the client, premises owner or the statement of cleanliness is normally only required for large-scale removal and if an enclosure is After removing textured coating , you need to let the client know the premises are safe to use again. Before you do this you need to be sure that textured coating has been removed, as agreed, and all debris cleaned up. The next page shows an example of a form to give to the client, premises owner or of cleanliness after textured coating removalem 10asbestos essentialsNon-licensed tasksThis information will help employers and the self-employed to comply with the Control of Asbestos Regulations is also useful for trade union and employee safety information about health and safety, or to report inconsistencies or inaccuracies in this guidance, visit You can view HSE guidance online and order priced publications from the website.

2 HSE priced publications are also available from guidance is issued by the Health and Safety Executive. Following the guidance is not compulsory, unless specifically stated, and you are free to take other action. But if you do follow the guidance you will normally be doing enough to comply with the law. Health and safety inspectors seek to secure compliance with the law and may refer to this document is available at: Crown copyright If you wish to reuse this information visit for details. First published as part of Asbestos essentials task manual by the Health and Safety Executive 07/172 of 2 pagesHealth and Safety Executiveem10 Statement of cleanliness after textured coating removalRegarding the removal of textured coating fromLocationAddresson DateThe removal work consisted of (job description):by (name of contractor)(contractor s address)I have checked that textured coating was removed and the area was cleaned thoroughly.

3 I inspected the following areas to make sure that there were no visible traces of dust or debris:(Areas inspected)I am satisfied that the area can be returned to normal name (capitals)Dat


Related search queries