Example: bachelor of science

OBD 1350 ProGrade OBDII Scan Tool - Bosch Diagnostics

OBD 1350 ProGrade OBDII scan tool en User guide en | 2 | User guide | OBD 1350 ProGrade OBDII scan tool Serial No: _____. SW ID: _____. HW Ver: _____. Boot Ver: _____. Prod ID: _____. Board ID: _____. Burn Date: _____. Record the above information about your tool . The information is available at Main Menu --> System Setup --> tool Information. Provide this informa- tion when contacting technical support. If you have questions or concerns contact Technical Support: Phone: 1-800-228-7667. Email: The information, specifications and illustrations in this guide are based on the latest information available.

en | 6 | User guide | OBD 1350 ProGrade OBDII Scan Tool 580001 REV . A 11 .2016 WARNING Risk of poisoning. • Use this scan tool in locations with mechanical …

Tags:

  Tool, Scan, 3051, Obdii, Obd 1350 prograde obdii scan tool, Prograde

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of OBD 1350 ProGrade OBDII Scan Tool - Bosch Diagnostics

1 OBD 1350 ProGrade OBDII scan tool en User guide en | 2 | User guide | OBD 1350 ProGrade OBDII scan tool Serial No: _____. SW ID: _____. HW Ver: _____. Boot Ver: _____. Prod ID: _____. Board ID: _____. Burn Date: _____. Record the above information about your tool . The information is available at Main Menu --> System Setup --> tool Information. Provide this informa- tion when contacting technical support. If you have questions or concerns contact Technical Support: Phone: 1-800-228-7667. Email: The information, specifications and illustrations in this guide are based on the latest information available.

2 Bosch reserves the right to make changes at any time without notice. 580001 | REV. A | OBD 1350 ProGrade OBDII scan tool | User guide | 3 | en Table of Contents Vehicle Selection.. 20. CodeConnect Feature .. 21. 1 Safety Precautions.. 5 Code Criteria .. 22. Acronyms.. 22. Read All Instructions.. 5 Component Locator.. 23. Safety Messages .. 5. 5 Diagnostic Menu .. 23. 2 Important Safety Warnings and Instructions.. 5 I/M Monitors (Emissions) .. 24. Read Codes .. 25. 3 Getting Started .. 8 Erase Codes.. 27. Introduction.. 8 MIL Status.

3 28. Download Scanning Suite .. 8 State OBD Check.. 29. OBDII .. 8 View Data.. 29. SAE Publications .. 8 View Entire List.. 30. OBDII Data Link Connector (DLC).. 8 Custom List Select.. 30. OBD II Data Link Connector (DLC) Pins.. 9 Record Data.. 31. OBDII Diagnostic Trouble Codes (DTCs).. 9 View Freeze Data.. 32. Powertrain Codes.. 9 Drive Cycle Monitor.. 33. Chassis Codes.. 9 O2 Monitor Tests.. 34. Body Codes.. 9 Diagnostic Monitor Tests .. 35. Network Communication Codes.. 9 On-Board Systems.. 36. Vehicle Information.. 36. 4 Using the scan tool .

4 10 Oil Light Reset.. 38. The scan tool .. 10 Battery Reset.. 39. Specifications.. 10 Battery Information.. 39. Dimensions.. 10 Charging System Monitor .. 40. Display .. 10 Modules Present .. 41. Keypad .. 10 Fuel Consumption (MPG/KPL) .. 42. Power.. 11 KOEO On Demand .. 42. Internal Battery.. 11 KOEO Injector Buzz.. 43. Vehicle Power.. 11 KOEO Output State .. 44. USB Power .. 11 KOER On Demand .. 44. System Setup.. 11 KOER Glow Plug.. 45. Changing Measurement Units.. 11 KOER Cylinder Contribution.. 46. Changing Auto-Power Off.. 12.

5 Quick Test.. 12 6 Troubleshooting.. 46. Print Header.. 12 Error Messages .. 46. Language Setup .. 13 scan tool Does Not Power Up.. 47. Long PID Names.. 13 Vehicle Communication Fault .. 47. Pre-Trigger Setup .. 14 Operating Error or Erroneous Data.. 47. tool Information.. 14 Battery Replacement.. 47. Display Test.. 14 tool Self-Tests .. 47. Keypad Test.. 15 Technical Support .. 47. Memory Test.. 16. Program Mode .. 16 7 Appendix A . Vehicle-Specific Features.. 16 PID Definitions.. 47. Review Data .. 16. Recording.. 17 8 Appendix B Glossary.

6 50. Print Data.. 18. Code Lookup .. 19 9 Limited Warranty.. 55. Locating the OBD II Data Link Connector (DLC) 19. Connect the tool .. 19. 580001 | REV. A | en | 4 | User guide | OBD 1350 ProGrade OBDII scan tool 580001 | REV. A | OBD 1350 ProGrade OBDII scan tool | User guide | 5 | en 1 Safety Precautions 2 Important Safety Warnings For your safety, read this manual thoroughly before and Instructions operating your scan tool . Always refer to and follow WARNING. safety messages and test procedures provided by the Risk of electric shock.

7 Manufacturer of the vehicle or equipment being tested. Do not exceed voltage limits between The safety messages presented below and throughout inputs indicated in the Specifications. this user's manual are reminders to the operator to Use extreme caution when working exercise extreme care when using this test instrument. with circuits that have voltage greater than 60 volts DC or 24 volts AC. Read All Instructions Electric shock can cause injury. WARNING. Read and understand the user guide Risk of poisoning. before operating the tool .

8 Safety goggles and protective clothing must be worn by the operator and any bystanders. Read, understand, and follow all safety messages and Even if everyday glasses have instructions in this manual and on the test equipment. impact resistant lenses, they are Safety messages in this section of the manual contain a NOT safety glasses, and may not signal word with a three-part message and, in some provide adequate protection. instances, an icon. Do not use this scan tool in environ- ments where explosive vapors may Safety Messages collect.

9 These areas include: Safety messages are provided to help prevent personal below-ground pits. injury and equipment damage. All safety messages are confined areas. introduced by a signal word. The signal word indicates areas that are less than 18 inches the level of the hazard in a situation. The types of safety above floor. messages are. Use this scan tool in locations with DANGER mechanical ventilation providing at Indicates a possible hazardous situation least 4 air changes per hour. which, if not avoided, will result in death or Flammable fuel and vapors can ignite.

10 Serious injury to operator or bystanders. Do not smoke, strike a match, or cause a spark in the vicinity of the battery. WARNING Battery gases can ignite. Indicates a possible hazardous situation Avoid making an accidental connection which, if not avoided, could result in death between the battery terminals. Do not place or serious injury to operator or bystanders. uninsulated metal tools on the battery. When removing battery cables, remove CAUTION the ground cable first. Indicates a possible hazardous situation Avoid sparks when connecting or dis- which, if not avoided, may result in moderate connecting power leads to the battery.