Example: barber

ODOT Traffic Sign Design Manual - Oregon

ODOT Traffic Sign Design Manual 3rd Edition Oregon Department of Transportation Technical Services Traffic Roadway Section Traffic Standards & Asset Management Unit ODOT Traffic Sign Design Manual 3rd Edition Oregon Department of Transportation i Foreword Traffic Standards Unit June 2018 ODOT Traffic Sign Design Manual Version 03-04 June 2018 Heidi E. Shoblom, ODOT Sign Engineer Traffic Standards & Asset Management Unit The material contained herein is for information purposes only and may be used to aid new employees and those unfamiliar with ODOT Traffic Engineering practices, in accessing and applying applicable standards, statutes, rules, and policies related to Traffic sign Design .

All the information included in this manual is in compliance with the Manual on Uniform Traffic Control Devices (with Oregon Supplements), and the Sign Policy and Guidelines for the State Highway System. This manual is not a stand-alone manual that contains everything you need to know to create a perfect sign design plan.

Tags:

  Manual, Devices, Control, Uniform, Traffic, Oregon, Uniform traffic control devices

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of ODOT Traffic Sign Design Manual - Oregon

1 ODOT Traffic Sign Design Manual 3rd Edition Oregon Department of Transportation Technical Services Traffic Roadway Section Traffic Standards & Asset Management Unit ODOT Traffic Sign Design Manual 3rd Edition Oregon Department of Transportation i Foreword Traffic Standards Unit June 2018 ODOT Traffic Sign Design Manual Version 03-04 June 2018 Heidi E. Shoblom, ODOT Sign Engineer Traffic Standards & Asset Management Unit The material contained herein is for information purposes only and may be used to aid new employees and those unfamiliar with ODOT Traffic Engineering practices, in accessing and applying applicable standards, statutes, rules, and policies related to Traffic sign Design .

2 This Manual was authored by Greg Stellmach, former ODOT Sign Engineer, and is maintained by the current ODOT Sign Engineer. Comments can be emailed to Heidi Shoblom, ODOT Sign Engineer. Oregon Department of Transportation Technical Services Traffic -Roadway Section Traffic Standards & Asset Management Unit 3rd Edition ODOT Traffic Sign Design Manual Foreword ii Oregon Department of Transportation June 2018 Traffic Standards Unit Department of TransportationTraffic Roadway Section, MS#5 Traffic Standards & Asset Management Unit4040 Fairview Industrial DriveSalem, Oregon 97302 1142 DATE: September 20, 2013 TO: Sign Designers FROM: Heidi E.

3 Shoblom, State Sign Engineer SUBJECT: 2013 Sign Design Manual The purpose of this Manual is to familiarize new sign designers with their responsibilities and to provide them with an organized collection of standards, guidelines, policies, and procedures to Design a permanent signing plan for a project on the State Highway System. The concepts in the Manual work for local roads as well as State highways, so a road authority for a city or county can use this document as well. The amount of Design work consulted out by ODOT has increased dramatically over the last decade.

4 This Manual is intended to provide instruction that will not only help in developing our ODOT Design staff, but will also provide the information necessary for consultants or municipalities to produce PS&E documents for ODOT contracts. All the information included in this Manual is in compliance with the Manual on uniform Traffic control devices (with Oregon Supplements), and the Sign Policy and Guidelines for the State Highway System. This Manual is not a stand-alone Manual that contains everything you need to know to create a perfect sign Design plan. There are links to many different web sites and publications in this Manual that should be used when mentioned in the text.

5 This information, in combination, will give you the background to put the whole Design together. This Manual is not intended to replace any existing ODOT policy. It is intended to supplement existing ODOT policies, yet enhance the specific discipline of Permanent Signing Plans Design . This Manual is to be used as a resource, a guide, a technical reference, and a teaching aide, as well. Please contact the Traffic -Roadway Section for clarification or interpretation of any policies and standards within this Manual . The procedures described in preparing sign plans provide one way of completing a set of contract plans. There are other acceptable ways of completing contract plans.

6 When preparing contract work on a set of ODOT signing plans, it is important to check with the Region Sign Designer, prior to beginning Design work, to coordinate Design expectations for the project. ODOT Traffic Sign Design Manual 3rd Edition Oregon Department of Transportation iii Foreword Traffic Standards Unit June 2018 Contents Contents .. iii Figures .. vi Tables .. vii 1 | Developing Plans .. 2 Project Scope ..2 Treatment of Existing Signs and Supports ..2 Critical Sign Locations ..4 Sign Spacing .. 19 Sign Specific Needs and Guidance .. 20 2 | Designing Signs .. 28 Choosing Substrate and Sheeting Types .. 28 Designing Regulatory and Warning Signs.

7 32 Designing Guide Signs .. 34 3 | Designing Supports .. 40 Choosing a Support Type .. 40 Wood Posts .. 40 Steel Supports .. 40 Other Supports .. 42 4 | Drafting Standards .. 46 General .. 46 Plan Sheets .. 50 Sign Details .. 57 Sign and Post Data Tables .. 64 Sheet Numbers .. 76 Archiving of Files .. 77 5 | Standards .. 78 Standard Drawings and Standard Details .. 78 Standard Specifications and Special Provisions .. 78 6 | Estimates .. 82 List of Bid Items .. 82 Providing Quantities .. 84 Unit Costs and Regional Factors .. 86 3rd Edition ODOT Traffic Sign Design Manual Foreword iv Oregon Department of Transportation June 2018 Traffic Standards Unit Anticipated Items.

8 86 7 | Design Follow-Up .. 90 Construction Support .. 90 Shop Drawings / Submittals .. 90 8 | Special Design Considerations .. 94 Review Requirements for Interstate Signing .. 94 Appendix A | Signing Contacts .. 98 Project Leader / Consultant Project Manager .. 98 Roadway Designer .. 98 Specification Writer .. 98 Region Sign Designer .. 98 Traffic -Roadway Section Staff .. 99 District Sign Supervisor/Coordinator .. 99 State Parks .. 99 Oregon Travel Experience (OTE) .. 99 Right-of-Way .. 99 Sign Structures Designer .. 100 Geotechnical Engineer .. 100 Landscape Designer .. 100 Other Traffic Designers .. 100 Project Manager (and Inspector).

9 100 Bicycle & Pedestrian Program Manager .. 101 Construction Materials Inspection Lab .. 101 Survey Crew .. 101 Region Mobility Liaison .. 101 Appendix B | Sign Design Resources .. 102 Existing Sign Inventory & Photos .. 102 Digital Video Log .. 102 Manual on uniform Traffic control devices (MUTCD) .. 102 Standard Highway Signs Manual .. 103 Oregon Supplements to the MUTCD .. 103 Sign Policy & Guidelines for the State Highway System .. 103 ODOT Traffic Manual .. 103 ODOT Traffic Sign Design Manual 3rd Edition Oregon Department of Transportation v Foreword Traffic Standards Unit June 2018 Speed Zone Orders .. 104 No Parking Resolution.

10 104 Contract Plans Development Guide .. 104 Standard Specifications and Special Provisions .. 105 Standard Drawings .. 105 As-Built Plans .. 105 Oregon Bicycle and Pedestrian Plan .. 105 OARs and ORSs .. 106 Qualified Products List .. 106 Traffic control devices Handbook .. 106 Interstate Highways control Cities List .. 106 Appendix C | Level of Development .. 107 Design Acceptance Package .. 107 Preliminary Plans .. 107 Advance Plans and Specifications .. 108 Plans-In-Hand Meeting .. 108 Final Plans and Specifications .. 108 Appendix D | Sign Sizes .. 110 Appendix E | Mileage control Table .. 112 Appendix F | Abbreviations.


Related search queries