Oil & Gas Processing - Maersk Training

1 Oil & Gas ProcessingPresenting Aspentech and John M. Campbell & Co. in Norway23 Increasing well complexity and production at remote locations, inevitably results in needs for higher competence. At Maersk Training we recognise this and have designed our Training to meet the challenges and risks of the working specter of Maersk Training is wide. But we believe in specific Training for the needs of different industries and companies, and for the actual working environment of people. That is why we have organized the Training in different fields, all staffed by experienced specialist on oil and gas we are proud to present our valued cooperation partners Aspentech and John M. Campbell & to build process simulations using Aspen hysys . Understand the capabilities of Aspen Flare System Analyzer to rigorously model flare systems and equipment, and develop practical experience through modeling exercises with Modeling Flare System.

2 Develop the skills for creating and running dynamic simulations using Aspen hysys Dynamics. Learn how to solve dynamic problems and how to transfer steady-state models to dynamic models. Process Modeling using Aspen hysys Dynamic Modeling using Aspen hysys Dynamics Modeling Flare System with Aspen FLARENET Maersk Training in corporation with John M. Campbell & Co. is offering specialist gas Processing and gas facilities Training courses. We provide advanced technical Training , for highly skilled employees, and bring real world experience and competences to suit your demand for a competent workforce. Overview of Gas Processing Technical (G2) Gas Conditioning & Processing (G4) Gas Conditioning and Processing Special (G5) Oil Production & Processing Facilities (PF4) Operator Training for Oil & Gas Processing Facilities (OT1)We bring technical oil & gas Processing Training closer to our customer a better learning experience says it all.

3 We deliver knowledge and learning, thus increasing work performance, effectivity and business potential, while decreasing risk of incidents and Aspen hysys : Process ModellingDurAtiOn: 3 daysLEvEL: IntroductoryLearn to build process simulations using Aspen hysys . Discover how Aspen hysys allows rapid flowsheet construction and bi-directional calculations. Investigate how templates and subflowsheets can streamline and organize simulation efforts. Learn how to do preliminary cost estimation using Aspen Process Economic Analyzer from the Aspen hysys Environment. EHY2511 Flare network Design and ratingEHY221 Aspen hysys Dynamics: Dynamic ModellingDurAtiOn: 2 daysLEvEL: IntermediateUnderstand the capabilities of Aspen Flare System Analyzer to rigorously model flare systems and equipment, and develop practical experience through modelling exercises.

4 Enables the attendees to develop flare network models for convergent, divergent and looped : 2 daysLEvEL: IntermediateDevelop the skills for creating and running dynamic simulations using Aspen hysys Dynamics. Learn how to solve dynamic problems and how to transfer steady-state models to dynamic models. Discover techniques and rules of thumb for controller tuning. See how different control strategies can handle different types of disturbances and how capacitance and dead-time affect trainingOperator Training for Oil & Gas Processing Facilities - Ot1 Oil Production and Processing Facilities - PF4 LEvEL: BasicDiSciPLinE: Operator TrainingDurAtiOn: 5 DaysABOut tHE cOurSEThis course will provide the basic knowledge required for understanding processes and operating issues in typical North Sea production facilities.

5 The course is designed for Production operators and other non-engineering personnel requiring a broad introduction to production facilities and processes, including the separation, conditioning and disposition of produced oil, gas and water; including the common operational difficulties that may arise, as well as the operational tactics used to resolve : FoundationDiSciPLinE: Process FacilitiesDurAtiOn: 10 Days ABOut tHE cOurSEThe emphasis of this course is on oil production facilities from the wellhead to the delivery of a specification crude oil product to the refinery. Both onshore and offshore facilities will be discussed. Produced water treating and water injection systems are also covered. Solution gas handling processes and equipment will be discussed as well, though at a relatively high level.

6 In addition to the engineering aspects of oil production facilities, practical operating problems will also be covered including emulsion treatment, sand handling, dealing with wax and asphaltenes, etc. Exercises requiring calculations are utilized throughout the course. The course is intended to be comple-mentary to the G4 Gas Conditioning and Processing course which is focused on the gas handling side of the upstream oil and gas facilities area. Overview of Gas Processing - technical - G2 Gas conditioning and Processing - G4 Gas conditioning and Processing - Special - G5 LEvEL: BasicDiSciPLinE: Gas ProcessingDurAtiOn: 3 Days G2 is a versatile overview of the gas conditioning and Processing industry based on highly condensed material from Campbell s G4 and G6 courses. As a wide ranging overview, it is suitable for interested parties more so than direct practitioners, such as geologists, reservoir engineers, line managers, sales and business development staff, related specialists such as environmental staff, operational staff, shift foremen, or those new to the industry such as entry-level engineers, as well as anyone interested in a general, technically oriented overview of the gas Processing : FoundationDiSciPLinE: Gas ProcessingDurAtiOn: 10 Days The Campbell Gas Course has been the standard of the industry for forty years.

7 Over 30,000 engineers have attended our G4 program, considered by many to be the most practical and comprehensive course in the oil and gas industry. Both hand-methods and computer-aided analysis are used to examine sensitivities of technical decisions. To enhance the learning process, about 30 problems will be assigned, reviewed and discussed throughout the : IntermediateDiSciPLinE: Gas ProcessingDurAtiOn: 5 Days The course has been designed to cover topics from the 10 day G4 course in an accelerated 5-day format using a commercial simulator to perform calculations. A basic working knowledge of the commercial process simulation package being used will provide the best oppor-tunity to achieve the learning objectives of this course. Volumes 1 and 2 of the John M. Campbell text books, Gas Conditioning and Processing , are used as the basis for the material presented in this course.

8 A comprehensive course exercise based on a typical gas Processing facility which can be applied to either onshore or offshore facilities is used for this course. The problem is developed in stages, as the material is covered, using a commercial simulator package (typically Promax or UNISIM ). At the completion of the course the participant will have developed a process simulation model that includes a dew point control process, a mechanical refrigeration process with economizers, hydrate inhibition using MEG, gas dehydration using TEG, and liquid product stabilization with M. campbell & co training67 Maersk Training norway ASLuramyrveien 234313 SandnesNorway Tel: +47 51 96 19