ON-LINE PROFILE - MEASURING SYSTEMS ACS PRO …

1 The ASC PRO-FIL is a blown film gauge PROFILE displayed on a 17 color monitor in a conventional measurement system designed to measure film while linear or a polar graphic format. Data is also in production. The system is capable of MEASURING displayed in tabular format and includes target and and displaying the gauge PROFILE of up to four lines on a actual maximum and minimum gauge deviation, 2-single computer and monitor. The standard system sigma variation and if optionally equipped lay flat includes computer, software, monitor and one gauge, width and line for additional lines are optional.

2 One computer system ACS PRO-FIL can monitor Gauge PROFILE may be measured by a capacitive and display to a maximum of four lines concurrently. sensor located in the collapsing frames, on the bubble The data or plots for each line may be displayed on a with an optional rotating scanner with radial single page or up to four PROFILE displays may be show adjustment or by an Air Gap Sensor positioned down on a single screen. stream of the nip rolls on the lay flat film. For very ACS PRO-FIL is a modular system and may be sticky films that will not slide over a conventional expanded to include PRO-CON automatic PROFILE capacitance head an optional, patented Rolling control air ring, width measurement/control, weight Capacitive sensor may be supplied.

3 Per length control and material dosing. All PLAST- PROFILE information with die bolt mapping is CONTROL SYSTEMS are network compatible. ACS PRO-FILON-LINE PROFILE - MEASURING SYSTEMSFor Mono- and Coextrusion Blown film linesQUALITY ASSURANCE WITH PLAST-CONTROLPROFILE MEASUREMENTNon-contacting PROFILE measurement headafter the collapsing frameAlternative principlesof PROFILE measurement:Capacitive PROFILE measurementin the collapsing frameCapacitive PROFILE measurementwith radial adjustmentCapacitive PROFILE measurementwith radial adjustmentand rotating scannerADVANTAGESnSimple operationnSelf calibrating, no samples requirednUp to four lines can be constantly monitored per ACS PRO-FIL systemnTwin head pneumatic sensor for increased update to die bolts for all applications including rotating/oscillating diesnAutomatic adjustment for changes in bubble diameter (radial adjustment)

4 NUpgradable to full automatic PROFILE control PRO-CON if only one line is being monitorednNon contacting measurement for critical film productionsnShort job changesnRetrofits on existing linesnFast return on investmentnWidth measurement and control of the layflat (IBC and non IBC SYSTEMS )nGravimetric Extrusion Control, Mono and Co-extrusion lines, Gravimetric Dosing Units*nAutomatic PROFILE control PRO-CON, three sizes of segmented air ring available with single/dual lip and HI-FLOW high output design*UPGRADE FEATURESSCANNER OPTIONSPLAST-CONTROL Ger tebau GmbH - Walter-Freitag-Str.

5 15 - D-42857 Remscheid (Germany) - Tel.:(+49) 2191 53084 - Fax.:(+49) 2191 51695 PLAST-CONTROL Ltd. (UK) - Unit17 - Riversway Workshops - Ashton - Preston, Lancashire - PR2 2TE Tel.:(+44) 1772 769963 - Fax.:(+44) 1772 736357 PLAST-CONTROL Inc. (USA) - 65 Parker Street, Unit 10 - Newburyport, MA 01950 - Tel.:(+1) 978-462-0306 - Fax.:(+1) 978-462-1425 World Wide Web: : PLOTS*Please Note:Upgrades cannot be made to multi head PROFILE measurement in mmsubject to be changed w/o noticetype 5type 4type 3type 2scanner type 153 125 137 114 153 141 169 measurable film max double lay flat mindouble lay flat max scannerouter diameter max scannerouter diameter mindouble lay flat 85 69 53 45 129 106 87 67 30 51 68 93 -/-linear adjustment type 400linear adjustment type 60032 59 44 19 17 28 44

6 -/--/-min min 27 44 69