OPERATING & MAINTENANCE MANUAL - Ice Air

1 Packaged Terminal Air Conditioner (PTAC) OPERATING & MAINTENANCE MANUALW orld Class : RSANOPERATING & MAINTENANCE MANUAL PACKAGED TERMINAL AIR CONDITIONER (PTAC) RSAN2 WELCOMEC ongratulations on your selection of ICE AIR Packaged Terminal Air Conditioners (PTACs) for your comfort conditioning requirements. PTAC units are thru-wall combination cooling and heating units, which provide an efficient, room-by-room source for comfort conditioning of your living environment. ICE AIR PTAC units are built to a high standard of quality and reliability, employing commercial grade components and heavy duty, galvanized sheet metal casings.

2 With proper MAINTENANCE and usage, ICE AIR PTACs should provide many years of efficient, quiet and trouble-free enhance the use of your ICE AIR equipment, you will want to read and carefully follow all of the instructions contained in this OPERATING & MAINTENANCE MANUAL . We recommend that you pay special attention to the Safety & Operation information section at the beginning of this MANUAL , and to the various safety advisories throughout this retain this MANUAL for your future reference. We suggest that you retain it with other important documents and product manuals.

3 The information contained within this MANUAL , unless noted herein, applies to all ICE AIR PTAC models. If your unit has optional features, they will be explained in a separate instruction sheet specific to that behalf of ICE AIR, and our network of distributors and dealers, we are happy to welcome you to our base of satisfied customers!SAFTEY & OPERATIONFOR SAFE AND OPTIMAL ENJOYMENT OF YOUR ICE AIR PTAC UNIT, PLEASE READ THE FOLLOWING CONSUMER SAFETY AND OPERATING NOTES CAREFULLY BEFORE OPERATING YOUR EQUIPMENT! This unit MUST be serviced only by professionally trained, qualified technicians.

4 Do NOT attempt to maintain or service this unit on your own severe injury and death can occur from electric shock, moving parts, and other hazards. Our ICE AIR units must each be wired on an individual, dedicated electrical circuit with the correct voltage and proper amperage (capacity) to match the unit nameplate requirements. Each unit s electric circuit must have a proper overcurrent protection device, employing an approved circuit breaker or fuse of the proper rating under NEMA and local building codes. Every unit contains refrigerant within a sealed and pressurized refrigerant system.

5 This system must not be opened or tampered with and any refrigera-tion system repairs MUST be carried out by trained technicians. Refrigerant must be properly handled and recycled per EPA regulations and guidelines. Your ICE AIR unit must be properly installed and commissioned to operate correctly. Improper unit installation, adjustment or commissioning, and / or improper heating system installation and connection can lead to equipment malfunction and hazardous OPERATING conditions, and may void your warranty. If you have any doubt about the proper installation of your PTAC unit, please contact your property manager at once to have a qualified technician inspect the equipment.

6 LOCATIONMODEL #SERIAL #Living RoomMaster BedroomBedroomDining RoomWe recommend that you record the following information about your ICE AIR PTAC products: 3 OPERATING & MAINTENANCE MANUAL PACKAGED TERMINAL AIR CONDITIONER (PTAC) RSANDo NOT operate the equipment when in doubt have it inspected first!IMPORTANT NOTE: It is not the intent of this MAINTENANCE MANUAL to correct any installation deficiencies. If you have any doubt about the proper initial installation (or reinstallation after servicing) of your PTAC unit(s) noisy or inefficient unit operation, frayed or damaged electrical connections, improper unit appearance, etc.

7 Please contact a trained servicer or building MAINTENANCE staff immediately. THE FOLLOWING PHYSICAL CONDITIONS MUST BE MAINTAINED FOR PROPER UNIT OPERATION:Unobstructed air flow into and out of the unit room enclosure (cabinet). Therefore: Do not place furniture, rugs or objects directly in front of, underneath or against the unit cabinet front. Do not place plants, fabrics or objects on top of or blocking the enclosure discharge grille (at the cabinet top). Do not block the top of the cabinet with drapes or curtains. To ensure proper cooling and heating, drapes and curtains should be opened or positioned so that the air discharge from the unit does not flow behind these window treatments.

8 Have the unit filter properly cleaned and serviced to prevent air blockage from dirt and dust within the filter installation and OPERATING environment must be maintained. Therefore: Do not operate the unit in corrosive environments such as chemical plants, refineries or salt spray areas. Operate only with proper electrical service and protective circuit breakers or fuses in place. Operate only with all chassis and enclosure sheet metal parts in place and properly installed. In areas of high concentrations of dirt, dust, pet dander or pollutants, clean the filter often (at least monthly).

9 If these or similar pollutants are present outdoors, have the unit condenser coil cleaned by trained service personnel. Do not clean the unit with any solvents or cleaning solutions that may damage the equipment (see MAINTENANCE instructions for proper cleaning protocols). Understand and follow the unit OPERATING instructions below before using your PTAC equipment. Operate only with proper electrical service and protective circuit breakers or fuses in place. Operate only with all chassis and enclosure sheet metal parts in place and properly & MAINTENANCE MANUAL PACKAGED TERMINAL AIR CONDITIONER (PTAC) RSAN4 RSAN EXPLODED VIEW5 OPERATING & MAINTENANCE MANUAL PACKAGED TERMINAL AIR CONDITIONER (PTAC) RSANDIMENSIONAL DRAWINGOPERATING & MAINTENANCE MANUAL PACKAGED TERMINAL AIR CONDITIONER (PTAC) RSAN6 CONTROLSAll standard ICE AIR PTAC units are equipped with digital controls.

10 The standard controls are located under the Air Discharge Grille at the top of the room cabinet. Lift the Access Door, located at the right side of the Air Discharge Grille, to access the control panel. STANDARD DIGITAL TOUCHPAD1. YOUR PTAC S TECHNICAL SPECIFICATIONS INCLUDE: Set-point Temperature 61-90 F Display F OPERATING Relative Fan , Medium or Low OPERATING Cooling, Heating and Fan2. BASIC OPERATIONS Display: The thermostat panel displays the actual temperature in the room. In order to view the setpoint temperature, press the UP or DOWN button once.