Operating and Maintenance Instructions NEMO …

1 Operating and Maintenance InstructionsImportant NoteThese Operating instructionsare designed to familiarizethe user with the machineand its designated Instruction Manual Contains important inform-ation on how to operate the machine safely, proper-ly and efficiently. Observingthese Instructions help to avoid danger, to reduce repair costs and downtimesand to increase the reliabil-ity and life of the machine ; Must always be available wherever the machine is in NumberSales Order/Job Number machine NumberDate of issue Must be read and applied by any person in chargeof carrying out work with and on the machine , such as:Operationincluding setting up, troubleshootingin the course of work, evacuation of production waste, care and disposal of fuels and consumablesMaintenance(servicing, inspection, and/or repair) Transport.

2 Shall be com-pleted by the end user andauthorized personnel with the national requirements in force for the prevention of accidents and the environmental addition to the operatinginstructions and to the manda-tory rules and regulations foraccident prevention and envi-ronmental protection in thecountry and place of use ofthe machine , the generally recognized technical rules forsafe and proper working mustalso be PaysFor ItselfNETZSCH Incorporated119 Pickering Way Exton, PA 19341 NEMO: Fax: of NETZSCHe-mail: -PumpTABLE OF CONTENTS1.

3 Safety Precautions12.)Description23.)Packing, Transportation, Storage34.)Installation Instructions45.)Start-Up56.)Temporary Shutdown67.)Maintenance78.)Trouble-Shoot ing and Solutions89.)Disassembly and Assembly of the Pump Housing910.) Disassembly and Assembly of the Rotating Parts1011.) Disassembly and Assembly of the Connecting Shaft 11with Seal12.) Disassembly and Assembly of the Shaft Sealing1213.) Disassembly and Assembly of Special Units1314.) Recommended Spare Parts1415.) Parts List and Sectional Drawing15 NEMO-NM BY-with packing 4-20-01 PAGE01 SAFETY PRECAUTIONS1 Safety PrecautionsThese Operating Instructions contain essentialinformation which should be observed duringinstallation, operation and Maintenance .

4 Theseoperating Instructions should be read andunderstood by the engineer, as well as otherresponsible operators before assembly andoperation. Operating Instructions shouldalways be readily available wherever themachine is being general safety rules detailed under SafetyPrecautions , plus the safety precautions set bythe end user, must be Relating to Safety Precautions in the Operating InstructionsPersonal injury, damage to machines or con-tamination of the environment can result if thesafety precautions contained in this documentare not strictly enforced.

5 Following are signscommonly used to signify areas of danger:Safety Sign Danger to General PublicSafety SignElectrical HazardDanger from Possible Injury by MachineryDanger from Suspended LoadsDamage to MachineryContinued on Page SAFETY PRECAUTIONSW arning or indication plates attached to thepump which show the correct direction of rota-tion (or fluid connections) must always be keptin readable and Training of PersonnelAll personnel responsible for service, mainte-nance, inspection, installation and operationmust have the appropriate and supervision of personnelmust be strictly enforced by the end user.

6 Iftraining of personnel is required, it can beprovided by the , it is the responsibility of the enduser to ensure that personnel fully understandsthe Operating of Safety PrecautionsNon-observance of the safety rules can result inpersonal injury, damage to machines or con-tamination of the environment. Non-obser-vance can void product can also result in the following: Premature failure of components or machine /equipment malfunction. Danger to personnel from electrical, mechanical or chemical hazards.

7 Danger to the environment from leakage of dangerous OperationThe safety precautions outlined in these oper-ating Instructions , the existing national regula-tions on accident prevention and the end user sown Operating and safety regulations must Precautions Hot or cold machine components must be insulated or shielded. Guards covering moving parts ( shafts, couplings) must not be removed while machines are in operation. Leakage of dangerous materials ( explo-sives, toxins or hot materials) from the shaftsealing area should be properly contained.

8 In order to prevent electrical hazards, appli-cable local and/or federal regulations mustbe adhered to. Continued on Page Precautions for Maintenance , Inspection and Installation WorkThe end user must ensure that all Maintenance ,inspection and installation work is performedby authorized and qualified personnel whounderstand the Operating Instructions and areproperly on a pump/ machine should only beperformed when it is disconnected from itspower source, pressure has been relieved, andthe complete unit has returned to roomtemperature.

9 It is imperative that theseprocedures are adhered to before attemptingwork on the or units which transfer dangeroussubstances must be following Maintenance work, allsafety and protection equipment must be re-installed and safety trips must be to Section , Start-up, before restart-ing Use of Spare Parts and/or Modifications to the PumpModifications to the machines and/or its com-ponents are permitted only with the manufac-turer s consent. Original spare parts and acces-sories authorized by the manufacturer ensuresafety.

10 The use of other components revokesany warranty and liability for consequenceswhich may ApplicationMachinery is only guaranteed safe for the machinery was manufactured inaccordance to the specifications and theconditions specified by the end user. Themachine should not be operated in any waythat exceeds design Points for the Use of NEMO PumpsNEMO Pumps should only be used for theapplication for which they were you wish to change the pumping medium,you should check with either the supplier ormanufacturer to ensure that the pump will besuitable for the new medium.