OPERATOR'S MANUAL - CLEAN BURN

1 OPERATOR'S MANUALCLEAN BURN MODELS: CB-1500 and CB-2500 MULTI-OIL FURNACES with CB-500 Series BurnerPUBLICATION DATE: 6/1/10, Rev. 4 CLEAN BURN PART # 43161 WARNING: DO NOT assemble, install, operate, or maintain this equipment without firstreading and understanding the information provided in this MANUAL . Installation andservice must be accomplished by qualified personnel. Failure to follow all safety precautionsand procedures as stated in this MANUAL may result in property damage, serious personal injuryor BURN, INC. 34 Zimmerman Road Leola, PA 17540 2009 CLEAN Burn, Inc.

2 All rights reserved. No part of this publication may be reproduced, or distributed withoutthe prior written permission of CLEAN Burn, Inc. 34 Zimmerman Road, Leola, PA 17540. Subject to change without CLEAN Burn logo is a trademark of CLEAN Burn, Inc. All other brand or product names mentioned are the registeredtrademarks or trademarks of their respective V / 50 HzI88942 FOR YOUR SAFETY - DO NOT STORE GASOLINEOR OTHER FLAMMABLE VAPORS AND LIQUIDSIN THE VICINITY OF THIS OR ANY APPLIANCE!!220-240 50-60Hz 3 Wts 10sType BHO 64Nr. 057H7036 Danfoss DECLARATION OF CONFORMITY Manufacturer: CLEAN Burn Inc.

3 34 Zimmerman Rd. Leola, PA US A European Re presentative: Please call 1-800-331-0183 for authorized European distributors Equipment: CB-1500 CE # 90191 CB-2500 CE # 90158 EMC Competent Body.

4 T V Rheinland Product Safety GmbH Am Grauenstein, D-51105 K ln I hereby declare that the above named machinery complies with Essential Health and Safe ty Requirements of the Industrial Machinery Directive (IM D - 98/37/EEC) as amended, with the Low Voltage Directive (LV D 73/23/EEC)

5 As amended, and with the Electroma gnetic Compatibility Directive (EMC 89/336/EEC) as amended. Safety Standard: EN 230: 1990 Monobloc Oil Burners Safety, Control, and Regulation Devices and Safety Times. EN 292-1:1991 Safety of machinery - Basic concepts, general principles for design - Part 1 : Basic terminology, methodology. EN 292-2:1991+A1 Safety of machinery - Basic concepts, general principles for design - Part 2 : Technical principles a nd specifications EN 60204-1:2000 Safety of machinery. Ele ctrical equipment of machines. General requirements.

6 EMC Standards: EN 55014-1: 2000 Electromagnetic Compatibility Requirements for Household Appl iances, El ectric Tools , and S imilar Appa rat us . P art 1: Emis sion. EN 55014-2: 2000 Electromagnetic Compatibility Requirements for Household Appl iances, E l ectric Too ls , an d S im ilar Ap pa rat us . P art 2: Im m u nit y. EN 50165: 1997 Electrical Equipment of Non-Electric Appliances for Household and S imilar Purpos es. Safety Requirements . Note: Above equipment is subject to an EMC Tec hnical Construction File and Competent Body Certificate Number AV 72031804 0001.

7 1 1 Fe br ua ry, 2 009 Rya n D. G a mbe r Engineering Manager TABLE OF CONTENTSSECTION 1: INTRODUCTION ..1-1 Guide to this MANUAL .. 1-1 For Your ..1-2 Guidelines for Furnace Usage .. 1-4 Guidelines for Used Oil Tanks .. 1-5 Safety Labels .. 1-6 SECTION 2: UNPACKING ..2-1 Removing the Shipping Crate .. 2-1 Unpacking and Inspecting All Components .. 2-1 Furnace Component List.

8 2-1 Unpacking Items Packed Inside the Furnace .. 2-2 SECTION 3: FURNACE Assembly .. 3-1 Required Tools and 3-1 Overview of Furnace 3-2 Installing the Blower 3-3 Wiring the Blower 3-4 Determining the Hot Air Discharge 3-5 Installing the Hot Air Discharge 3-6 Installing the Energy Retention 3-9 Installing the Energy Retention Disc in the Combustion 3-9 Closing the Furnace 3-9 Installing the 3-9 Checking the Burner Nozzle and 3-9 Mounting the Burner on the Hinge the Connector Block, Oil Line Tubing, and Air Line the Connector Block on the Furnace the Oil Line the Air Line the Burner into Firing 4.

9 FURNACE Installation .. 4-1 Important Safety Guidelines for Safe Installation .. 4-1 Selecting a Location .. 4-5 Guidelines for Selecting a Location .. 4-5 Mounting the Furnace .. 4-6 Ceiling Mounting .. 4-6 Raised Platform Mounting .. 4-7 Floor Mounting .. 4-7 TABLE OF CONTENTSSECTION 4: FURNACE INSTALLATION (continued)Oil Tank Installation Specifications .. 4-8 Installing the Tank Vent and Emergency Vent .. 4-9 Installing the Metering Pump .. 4-10 Preparing for Installation .. 4-10 Standard Mounting: Vertical Positioning .. 4-10 Alternate Mounting: Horizontal Positioning.

10 4-12 Wiring the Furnace and Pump .. 4-13 Wiring to the Furnace .. 4-13 Wiring to the Metering the Suction Oil Line the Pressure Relief Oil Line Back to the the Pressure Oil Line the Compressed Air the Design and the Interior the Barometric the Stack the Exterior the Stack the Optional Draft the Wall the Furnace 5: METERING PUMP PRIMING .. 5-1 Understanding Metering Pump Priming .. 5-1 Required Tools and 5-1 Priming the Metering 5-2 Vacuum Testing the Oil 5-4 SECTION 6: STARTING AND ADJUSTING THE BURNER .. 6-1 Understanding Burner Startup and Adjustment.