Operator’s Manual First Edition Seventeenth Printing with ...

1 Operator s ManualFirst EditionSeventeenth PrintingPart No. 46281with Maintenance InformationGenie GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-3246 Part No. 46281 Operator's ManualFirst Edition Seventeenth PrintingCopyright 1997 by Genie IndustriesFirst Edition : Seventeenth Printing , October 2002"Genie" is a registered trademark ofGenie Industries in the and many othercountries. "GS" is a trademark of machines comply withANSI/SIA Printed on recycled paperPrinted in , understand and obey these safety rules andoperating instructions before operating this trained and authorized personnel shall bepermitted to operate this machine.

2 This Manual shouldbe considered a permanent part of your machine andshould remain with the machine at all times. If you haveany questions, call Genie .. 10 Pre-operation Inspection .. 14 Function Tests .. 16 Workplace Inspection .. 21 Operating Instructions .. 22 Transport Instructions .. 28 Specifications .. 32 Contact us:Internet: : No. 46281 Genie GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-32461 Operator's ManualFirst Edition Seventeenth PrintingSafety RulesDangerFailure to obey the instructions andsafety rules in this Manual willresult in death or serious Not Operate Unless.

3 You learn and practice the principles of safemachine operation contained in this operator' Avoid hazardous and understand the safety rulesbefore going on to the next Always perform a pre-operation Always perform function tests prior to Inspect the Only use the machine as it was read, understand and obey:Manufacturer's instructions and safetyrules safety and operator's manualsand machine decalsemployer's safety rules and worksiteregulationsapplicable governmental regulationsYou are properly trained to safely operate GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-3246 Part No.

4 46281 Operator's ManualFirst Edition Seventeenth PrintingSAFETY RULESE lectrocution HazardsThis machine is not electrically insulated and willnot provide protection from contact with orproximity to electrical safe distances from electrical power linesand apparatus in accordance with applicablegovernmental regulations and the following SafePhase to PhaseApproach DistanceFeet Meters0 to 300 VAvoid Contact300V to to to to to to for platform movement, electrical line swayor sag and beware of strong or gusty away from the machine if it contactsenergized power lines. Personnel on the groundor in the platform must not touch or operate themachine until energized power lines are shut not operate the machine during lightning not use the machine as a ground for HazardsOccupants and equipment must not exceed themaximum platform capacity or the maximumcapacity of the platform capacity - GS-2032 Platform retracted800 lbs363 kgPlatform extended - Platform only550 lbs249 kgPlatform extended - Extension only 250 lbs113 kgMaximum occupants - ANSI and CSA 2 Maximum occupants - CE and AustraliaOutdoor use1 Indoor use only2 Maximum capacity.

5 GS-2632 Platform retracted500 lbs227 kgPlatform extended - Platform only250 lbs113 kgPlatform extended - Extension only 250 lbs113 kgMaximum occupants - ANSI and CSA 2 Maximum occupants - CE and AustraliaIndoor use only2800 lbs / 363 kgExtension only250 lbs / 113 kgPlatform only550 lbs / 249 kg500 lbs / 227 kgExtension only250 lbs / 113 kgPlatform only250 lbs / 113 kgPart No. 46281 Genie GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-32463 Operator's ManualFirst Edition Seventeenth PrintingSAFETY RULESDo not raise the platform unless the machine is ona firm, level not depend on the tilt alarm as a level tilt alarm sounds on the chassis only when themachine is on a the tilt alarm sounds:Lower the platform.

6 Move the machine to a firm,level surface. If the tilt alarm sounds when theplatform is raised, use extreme caution to lower not alter or disable the limit not drive over mph / km/h with theplatform capacity - GS-2046 Platform retracted1200 lbs544 kgPlatform extended - Platform only950 lbs431 kgPlatform extended - Extension only 250 lbs113 kgMaximum occupants2 Maximum capacity - GS-2646 Platform retracted1000 lbs454 kgPlatform extended - Platform only750 lbs340 kgPlatform extended - Extension only 250 lbs113 kgMaximum occupants - CE2 Maximum occupants - AustraliaOutdoor use1 Indoor use only2 Maximum capacity - GS-3246 Platform retracted700 lbs318

7 KgPlatform extended - Platform only450 lbs204 kgPlatform extended - Extension only 250 lbs113 kgMaximum occupants - ANSI and CSA 2 Maximum occupants - CE and AustraliaOutdoor use1 Indoor use only21000 lbs / 454 kgExtension only250 lbs / 113 kgPlatform only750 lbs / 340 kg700 lbs / 318 kgExtension only250 lbs / 113 kgPlatform only450 lbs / 204 kg1200 lbs / 454 kgExtension only250 lbs / 113 kgPlatform only950 lbs / 431 kg4 Genie GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-3246 Part No. 46281 Operator's ManualFirst Edition Seventeenth PrintingGS-2046 ANSI & CSA - 2 person180 lbs / 801 NCE - Indoor use only - 2 person180 lbs / 801 NCE - Outdoor use - 2 person90 lbs / 400 NGS-2646 ANSI & CSA - 2 person150 lbs / 667 NCE - Indoor use only - 2 person150 lbs / 667 NCE - Outdoor use - 2 person90 lbs / 400 NAustralia - Indoor use only - 2 person120 lbs / 534 NAustralia - Outdoor use - 1 person45 lbs / 200 NGS-3246 ANSI & CSA - 2 person105 lbs / 467 NCE & Australia - Indoor use only - 2 person105 lbs / 467 NCE & Australia - Outdoor use - 1 person 45 lbs /

8 200 NDo not alter or disable machine components that inany way affect safety and not place or attach fixed or overhanging loads toany part of this not place ladders or scaffolds in the platform oragainst any part of this not modify or alter an aerial work attachments for holding tools or othermaterials onto the platform, toeboards or guard railsystem can increase the weight in the platform andthe surface area of the platform or the not operate the machine in strong or gustywinds. Do not increase the surface area of theplatform or the load. Increasing the area exposed tothe wind will decrease machine not drive the machine on or near uneven terrain,unstable surfaces or other hazardous conditionswith the platform extreme care and slow speeds while drivingthe machine in a stowed position across uneventerrain, debris.

9 Unstable or slippery surfaces andnear holes and not push off or pulltoward any object outsideof the allowablemanual forceGS-2032 ANSI & CSA - 2 person120 lbs / 534 NCE - Indoor use only - 2 person120 lbs / 534 NCE - Outdoor use - 1 person45 lbs / 200 NGS-2632 ANSI & CSA - 2 person100 lbs / 445 NCE - Indoor use only - 2 person100 lbs / 445 NAustralia - Indoor use only - 2 person90 lbs / 400 NSAFETY RULESPart No. 46281 Genie GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-32465 Operator's ManualFirst Edition Seventeenth PrintingSAFETY RULESDo not replace items critical to machine stabilitywith items of different weight or not use the machine on a moving or mobilesurface or sure all tires are in good condition, castle nutsare properly tightened and cotter pins are not use batteries that weigh less than theoriginal equipment.

10 Batteries are used ascounterweight and are critical to machine battery must weigh 65 pounds / 30 not use the machine as a not push the machine or other objects with not contact adjacent structures with not tie the platform to adjacent not place loads outside the platform not operate the machine with the chassis not use the platform controls to free a platformthat is caught, snagged or otherwise preventedfrom normal motion by an adjacent structure. Allpersonnel must be removed from the platformbefore attempting to free the platform using theground HazardsOccupants should wear asafety belt or harness andcomply with applicablegovernmental the lanyard to theanchor provided in not sit, stand or climb on the platform guardrails.