Transcription of Optical Cladding Materials: OF-136
1 MY Polymers Ltd. 7 Golda Meir St., Nes-Ziona 7403650, Israel. Tel:972-8-9350101, Fax: 972-8-9351767 E-mail: DATA SHEET Optical Cladding Materials: OF-136 OF-136 is a low refractive index coating material which is intended for the Cladding of Optical fibers. The material is designed to be compatible with Optical fiber Drawing Towers. OF-136 has an improved adhesion to silica and glass. Properties Liquid state nD liquid Density, g/cm3 Viscosity, cps @ 25 C 2200 Transparency clear Cured state nD cured RI cured at 950 nm Shrinkage upon curing 90 Peel, glass, g/cm 64 Shore A 95 Tensile Strength, MPa 8 Elongation, % 50 Elastic modulus, MPa 85 Transparency clear The product is supplied pre-filtered to below 1 micron particles. Storage 1. Avoid unnecessary exposure to ambient light and moisture. 2. The product should be stored at ambient conditions of 10-30 C.
2 Do not refrigerate. 3. Do not store under nitrogen. Oxygen is an essential inhibitor against premature gelation. 4. The coating is supplied in glass bottles. Keep container closed to avoid moisture penetration. The product is specified to be useful for 6 months. Application OF-136 is intended to be used in Optical fiber drawing towers. The UV curing is done under nitrogen. Typically, a dose of 1000-4000 mJ/cm2 is necessary. When properly cured under nitrogen, it should have no oily surface or a tacky surface. Keep the bottle closed in all times when not in use. The material is sensitive to both light and moisture. Safety: Refer to the MSDS Updated: October 28, 2015
