Opticom GPS System - Transportation Control Systems

1 Opticom GPS System Vehicle Equipment Opticom GPS System Matched Component Products October 2007. Description Opticom Model 1035 GPS Green The Opticom GPS System assists authorized Sense Harness priority vehicles through signalized Opticom model 1070 GPS installation cable intersections by providing temporary right-of- Opticom GPS System vehicle equipment is way through the use of common traffic mounted on the priority vehicle. Its GPS. controller functions. receiver obtains information from the The Opticom GPS System consists of the constellation of global positioning satellites. following matched components: This information is used to compute the location, speed and heading of the vehicle. Vehicle Equipment This information, along with a priority request Opticom Model 1012 GPS Radio Unit and the state of the vehicle's turn signal, is containing a GPS receiver and a GHz broadcast using the GHz spread spectrum spread spectrum transceiver, with Opticom transceiver.

2 Model 1050 GPS/Radio Antenna and Opticom GPS System intersection equipment Opticom Model 1072 GPS Cable Assembly receives the radio transmission from the Opticom Model 1020 GPS Vehicle Control vehicle equipment. The intersection equipment Unit (high priority) then compares the information being received OR from the vehicle with the parameters stored in Opticom Model 1021 GPS Vehicle Control the intersection equipment's memory. If the Unit (low priority) vehicle is heading toward the intersection in a Opticom Model 1071 GPS Vehicle predefined approach corridor, is requesting Interface Cable preemption or priority and has met all other programmed parameters, the corresponding Opticom Model 1070 GPS Installation Cable phase selector output is activated. This output Intersection Equipment is connected to the traffic controller Opticom Model 1010 GPS Radio Unit containing a GPS receiver with antenna and a GHz spread spectrum transceiver with antenna OR.

3 Opticom model 1012 GPS radio unit containing a GPS receiver and a GHz spread spectrum transceiver, with Opticom model 1050 GPS/radio antenna and Opticom model 1072 GPS cable assembly Opticom Model 1000 GPS Phase Selector Opticom Model 1040 GPS Card Rack Opticom Model 1071 GPS Vehicle Interface Cable, Opticom . Model 1020 or 1021 GPS Vehicle Control Unit, Opticom Model Opticom Model 1030 GPS Auxiliary 1050 GPS/Radio Antenna and Opticom Model 1012 GPS. Interface Panel Radio Unit Opticom GPS System Matched Component Products When activated, the controller cycles to grant a Easy installation green light to the requesting vehicle or holds Low power consumption the green, allowing the vehicle to pass through Additional GPS output in NEMA format for the intersection. other onboard uses The Opticom Model 1040 GPS Card Rack Available Windows configuration and provides the power and logic wiring for the maintenance software Opticom Model 1000 GPS Phase Selector, Choice of configurable activation methods which plugs directly into a slot in the unit.

4 An alternate external power supply may be needed Activated by lightbar for use in cabinets with pre-wired priority Activated by lightbar AND by Control slots that do not have +24 VDC available driver activation and do not use the Opticom model 1040 GPS Activated by lightbar OR by card rack. The Opticom Model 1030 GPS driver activation Auxiliary Interface Panel provides connections for monitoring green phases and provides The following reference model numbers appear additional priority Control outputs. on the shipping boxes and serial plate labels: Opticom Model 1012 GPS Radio Unit The Opticom Model 1035 GPS Green Sense Opticom Model 1020 GPS Vehicle Control Unit Harness can be used to provide connection for (high priority). monitoring green phases when the Opticom model 1030 GPS auxiliary interface panel is Opticom Model 1021 GPS Vehicle Control Unit not required. (low priority).

5 Opticom Model 1050 GPS/Radio Antenna Features Opticom Model 1071 GPS Vehicle Opticom GPS System vehicle equipment is Interface Cable intended for use on priority vehicles. The Opticom Model 1072 GPS Cable Assembly vehicle equipment kit consists of 1) the Physical Dimensions compact, RF-energy-emitting Opticom Model 1012 GPS Radio Unit containing a GPS receiver Opticom model 1012 GPS radio unit and a GHz spread spectrum transceiver, Length: in. ( cm). used with the Opticom Model 1050 GPS/Radio Width: in. ( cm). Antenna and Opticom Model 1072 GPS Cable Height: in. ( cm). Assembly; 2) an Opticom Model 1020 or 1021 Weight: lbs. ( kg). GPS Vehicle Control Unit, which provides an Opticom model 1020 or 1021 GPS vehicle interface point for vehicle wiring (an external Control unit computer is used for configurations, setup and diagnostics); and 3) the Opticom Model 1071 Length: in. ( cm).

6 GPS Vehicle Interface Cable. Width: in. ( cm). Height: in. ( cm). Opticom GPS System vehicle equipment has Weight: lb. ( kg). the following features: Opticom model 1050 GPS/radio antenna More than 38 million vehicle identification Length: ft. ( m). code combinations selectable at installation Diameter: in. ( cm). Vehicle turn signal status monitoring Height: in. ( cm). and transmission Weight with cables: lbs. ( kg). User-selectable disable mode: latching or non- latching modes, disable trigger mode and +12 Electrical VDC to ground or ground to +12 VDC Input voltage: 10 16 VDC. Diagnostic and status indicators Current: Less than 2 amps FCC part 15 Class A specifications compliance Environmental No license requirements Temperature: -30 F to +165 F (-34 C to +74 C). Easily accessible computer interface Relative humidity: 5% to 95%. Operating Parameters Radio Unit Terminal Block Pin Index High or low priorities selected by model Pin Wire Color Function User-programmable number, which is 1 Yellow Radio transmit (+).

7 Transmitted to intersection equipment 2 Yellow/Black Radio transmit ( ). 254 agency IDs 3 Blue Radio receive (+). 15 vehicle classes 4 Blue/White Radio receive ( ). 9999 vehicle IDs 5 Orange Radio clock (+). Over 38 million combinations per 6 Orange/Green Radio clock ( ). priority level 7 Brown GPS power User-programmable reference vehicle name 8 Brown/White Common (up to 40 characters). 9 Violet Radio power Configurable disable operating mode 10 Violet/White Common Latching or non-latching 11 Bare Shield drain wire Disable trigger method +12 VDC to ground Ground to +12 VDC Vehicle Control Unit Indicators Less than 2 amps peak current draw Indicator Color or Condition Meaning Self-diagnosis POWER Green Power applied to unit Non-obstructed transmission at least 2,500 Green Power applied to unit feet (762 m) ON/OFF. Flashing Green Vehicle in disable mode Turn signal monitoring transmitted to intersection Vehicle NOT in Off disable mode R5485/J1708 serial interfaces DISABLE.

8 Amber Operating in probe mode Flashing Green Vehicle in disable mode Interface Harness Connector Pin Index Not receiving GPS, Amber GPS radio not transmitting Pin Wire Color Function 1 White/Yellow J1708 (+) Green GPS has good 3D fix Lightbar sense No communication 2 Blue or ignition switch Amber between radio unit and 3 Brown Low priority vehicle Control unit RADIO. 4 Gray Probe Good communication 6 White Disable sense Green between radio unit and 7 Green Right turn sense vehicle Control unit 8 Yellow Left turn sense 9 Black Ground 10 Red +12 VDC. 13 White/Orange GPS TXD ( ). 14 White/Brown GPS TXD (+). 15 White/Blue J1708 ( ). Important Notice to Purchaser: EXCEPT FOR THE LIMITED WARRANTIES SET FORTH IN THIS DOCUMENT, GLOBAL traffic TECHNOLOGIES (GTT) MAKES. NO OTHER WARRANTIES AND EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE.

9 GTT will, at its sole option, repair, replace or refund amounts paid for any Opticom GPS System component found to be defective in materials or manufacture within two (2) years from the date of shipment from GTT. GTT will provide a functioning replacement component for an additional three (3) years if extended warranty is purchased at time of original purchase and installation. GTT warrants future System operability coverage as described herein. This warranty shall not apply to any Opticom GPS System components which have been (1) repaired or modified by persons not authorized by GTT; (2) subjected to incorrect installation, misuse, neglect or accident; (3) damaged by extreme atmospheric or weather-related conditions, flood, fire, vandalism, crime or other events beyond the reasonable Control of GTT; or (4) subjected to events or use outside the normal or anticipated course. IN NO EVENT SHALL GTT BE LIABLE FOR ANY INJURY (INCLUDING, WITHOUT LIMITATION, PERSONAL INJURY), DEATH, LOSS, OR DAMAGE (INCLUDING, WITHOUT LIMITATION, PROPERTY DAMAGE), WHETHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR OTHERWISE, ARISING OUT OF THE USE OR INABILITY TO USE, REPAIR OR FAILURE TO.

10 REPAIR, ANY GTT PRODUCT, REGARDLESS OF THE LEGAL THEORY ASSERTED. THE REMEDIES SET FORTH IN THIS DOCUMENT. ARE EXCLUSIVE. Sale and use of the Opticom GPS System is expressly restricted to authorized agencies of government customers, within their specific jurisdictions. However, because the signal generated by the Opticom GPS System may not be exclusive, GTT does not warrant exclusive activation by purchaser. Authorized users who desire to use or coordinate use of the Opticom GPS System with that of other jurisdictions must first obtain the prior written approval of each authorized user in the jurisdiction where use is sought. Since the availability of the GPS signal is out of GTT's Control and is required for System operations, GTT does not warrant against Opticom GPS System failures due to the unavailability of the GPS signal for any reason. Opticom is a trademark of Global traffic Technologies, LLC.