OWNERS MANUAL - mossberg.com

1 1 OWNERSMANUALFOR 500 , 505 , 510 , 535 ,590 AND 835 PUMP ACTION SHOTGUNSIMPORTANT SAFETY WARNINGS - NOTE THE SYMBOLTHESE SAFETY WARNINGS ARE FOR YOUR PROTECTION AS WELL AS THESAFETY OF OTHERS. DISREGARDING INFORMATION IN THIS MANUAL COULDCAUSE SERIOUS INJURY OR DEATH TO YOU OR THOSE AROUND certain this owner s MANUAL is available for reference and is kept withthis firearm if transferred to another party. If this MANUAL is lost ormisplaced, contact the Product Service Center for a free replacement copyor visit performing any work on your firearm such as cleaning, adjustments,disassembly or installation of any accessory, the firearm should be re-checked for proper functioning before firing live are complex mechanisms. Any modification, alteration, orimproper fitting of parts may result in a dangerous malfunction, damageto the firearm, and could cause serious injury or death to you or thosearound you.

2 The firearm s owner must accept full responsibility for thecorrect reassembly and functioning of the firearm after any disassemblyor replacement of you do not understand any of the material in this MANUAL or have anyquestions, contact the Product Service Center or a qualified not attempt to load, handle or use your firearm until you read andunderstand the information contained in this owner s MANUAL . Beforehandling your firearm, you should learn how it operates and how tomaintain it. This includes knowing its basic parts, how the MANUAL safetyand other safety features operate, how to safely open and close the actionand how to safely load and unload ammunition from the firearm. Improperuse and handling is dangerous and could cause serious injury or death toyou or those around you.

3 All users of the firearm must become thoroughlyfamiliar with the instructions in this mossberg & SONS, BOX 497 7 GRASSO AVENUE, NORTH HAVEN, CONNECTICUT 06473 PHONE (800) and safe firearms handling is everyone s English_Layout 1 3/5/18 3:38 PM Page 1As the owner of a firearm, you must undertake the full-time responsibilityof safe firearms handling for your own safety and the safety of thosearound you:Keep all firearms and ammunition out of the reach of your firearms and ammunition store a loaded leave a loaded firearm transport a loaded firearm in a your firearm when you have stopped shooting and when youhave to climb a tree, fence, cross a slippery surface or have to transportit in a safety should remain fully in the ON (SAFE) position and thefirearm unloaded at all times until you are in a place where it is safe toshoot, keeping your finger off the trigger and outside of the trigger guarduntil you are aiming at the intended target and have decided to shoot at water, rocks or any hard surface.

4 Shots may glance off such surfaces and cause not use alcohol or drugs before or while handling not touch the trigger while the safety is being engaged or point the muzzle of your firearm in a safe direction, regardless ofwhether the firearm is loaded or unloaded. You should become thoroughlyfamiliar with the function and operation of this firearm and the instructionssupplied with treat every firearm as if it is loaded. Give your firearm to someonewith the action open (bolt fully rearward), and the safety fully in the ON (SAFE) position, after you verify the firearm is unloaded. Insist on thesame procedure when receiving a firearm from someone else. Learn thelocation of all the safety features of your firearm and how they wear eye and ear protection when shooting. Shooting withoutproper ear protection can cause hearing damage.

5 The use of eyeprotection during any type of shooting is important to protect your vision. When using a firearm with mounted optics, maintain an adequate distancebetween the rear of the scope and your face at all times. Be certain thescope installation does not interfere with access to, or the properfunctioning of the specifically disclaim any responsibility for damage or injurywhatsoever occurring in connection with, or as a result of, the useof faulty, or non-SAAMI standard, or remanufactured , or hand-loaded (reloaded) ammunition. Additionally, we disclaim anyresponsibility for damage or injury which results from anymodifications or changes that are not a part of the firearm asdelivered from the to clean your firearm thoroughly and make certain no oil, grease orother materials are blocking the barrel.

6 Obstructions of any kind can causedamage to the firearm and could cause serious injury or death to you orthose around proper firearm maintenance and safety. Make sure all exposed metalsurfaces are coated with a thin film of oil, especially after being exposed to dampweather. (See Cleaning and Lubrication section of this MANUAL ) Do not plug thebarrel or store in a fabric-lined case, which will absorb lubricants from the using after storage, follow complete instructions stated in this MANUAL forre-familiarization with the firearm. A thorough inspection and function test shouldbe performed before going into the field. Have your firearm periodically checkedby a qualified part NO. 12173 REV AC12173 English_Layout 1 3/5/18 3:38 PM Page 23A note about the warnings and information contained in this MANUAL :We strongly suggest that you check with your local licensed retailer or statepolice for additional information concerning firearms ownership, or huntingor target shooting rules that may be required by local law or regulation.

7 Sincesuch rules and regulations are subject to change, local authorities are in thebest position to advise you on such OF CONTENTSPageGENERAL INFORMATION AND MECHANICAL RELEASE AND PUMP ACTION TRIGGER SYSTEM GRIP +4 SHELL HOLDER ADJUSTABLE TACTICAL TROPHY AND ACCU-MAG CHOKE CONVERSION BASIC RULES OF FIREARM COVERWARNING: This product can expose you to chemicals, includinglead, which are known to the State of California to cause cancerand birth defects or other reproductive harm. For more informationgo to English_Layout 1 3/5/18 3:38 PM Page 34 GENERAL INFORMATION AND MECHANICAL CHARACTERISTICSFig. 1*The chamber is the rearmost part of the inside of the barrel. The breech is therear face of the barrel. They can only be seen when the bolt is in the open position.

8 **On left hand models the ejection port is on the opposite side of the receiver. SafetyButton 12173 English_Layout 1 3/5/18 3:38 PM Page 45 Read and understand this entire MANUAL and its safety warnings beforefiring the SAFETYThe safety button is located on the top rear portion of the receiver (Fig. 2) and mustbe manually moved to the desired position by the , a firearm s MANUAL safety is a mechanical device which cannever replace safe firearm handling any mechanical device can fail, never rely on any mechanismor safety device to prevent the dangers of careless handling or pointing afirearm in an unsafe 2 Fig. 3 The safety is set in the ON (SAFE) position by moving the safety buttonfully rearward into the safety detent. The button will now cover the red dot(Fig. 2).

9 The red dot is a training aid used only to show the direction of the ON (SAFE) position and should not be used as an indicator that thesafety is ON or OFF. The safety is set in the OFF (FIRE) position by moving the safety buttonto the forward position. The red dot will now be visible (Fig. 3). The safety should remain fully rearward in the ON (SAFE) position andthe firearm unloaded at all times until you are in a place where it is safe toshoot, keeping your finger off the trigger and outside of the trigger guarduntil you are aiming at the intended target and have decided to English_Layout 1 3/5/18 3:38 PM Page 56 ACTION RELEASE CONTROLThe action lock lever is located on the left side of the trigger housing just rearwardof the trigger guard. The action lock lever allows the action to be unlocked andopened for inspection of the chamber and action or unloading without pulling thetrigger.

10 The action may be opened by depressing the lever and pulling the forearmrearward (Fig. 4). Fig. 4 BARREL ASSEMBLYB arrels are notinterchangeable between model numbers, gauge, , 505 , 510 , 535 , 590 and 835 barrels areinterchangeable only with barrels of the same model, gauge and and left hand model barrels are not close the action or pull the trigger while the barrel is removedas damage could result to the facilitate shipping, some models are packaged with the barrel removed. A frontswivel stud and washer are also shipped separately on some models (see items35 and 36 in exploded view). To install the barrel in the receiver, proceed as follows:Visually and physically inspect the chamber and bore of the barrel to makecertain it is unloaded and that it is free of any obstructions, excessive oilor grease.