Example: bachelor of science

p-211

Product Information Bulletin Effective 1/98P-211 RADIANCE II BasecoatThe newly introduced DMX mixing bases have been reformulated sothat they offer an improved product in the existing formulations (DDLand DAU) and the additional flexibility for use in basecoat technologypaint systems (DELTRON 2000/DBC). The packaging has beenupdated and has resulted in a newly styled label and a new con-tainer size, one (1) pint. The new material will allow current users tocontinue to mix the standard DDL and DAU Refinish formulas. Theadded benefit will be the recommended use in Hi Gloss/CandyFinish Choice of UniqueColors Custom Market Choice of Top CoatClears Move More JobsThrough Shop CustomerSatisfaction Fast Dry Times Highly ProductivePHOTOPOSITION ONLYPPG Industries, Inc., 19699 Progress Dr., Strongsville, OH 44136 1998 PPG Industries, Inc.

Any clear approved over DAU including; • DAU 82 Delglo® Clear • DCU 8200 CONCEPT® Urethane Clear • DCD 35 Delta® Clear • DCU 2035 Diamond Coat Plus Urethane Clear ...

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of p-211

1 Product Information Bulletin Effective 1/98P-211 RADIANCE II BasecoatThe newly introduced DMX mixing bases have been reformulated sothat they offer an improved product in the existing formulations (DDLand DAU) and the additional flexibility for use in basecoat technologypaint systems (DELTRON 2000/DBC). The packaging has beenupdated and has resulted in a newly styled label and a new con-tainer size, one (1) pint. The new material will allow current users tocontinue to mix the standard DDL and DAU Refinish formulas. Theadded benefit will be the recommended use in Hi Gloss/CandyFinish Choice of UniqueColors Custom Market Choice of Top CoatClears Move More JobsThrough Shop CustomerSatisfaction Fast Dry Times Highly ProductivePHOTOPOSITION ONLYPPG Industries, Inc., 19699 Progress Dr., Strongsville, OH 44136 1998 PPG Industries, Inc.

2 1/98 The entire Radiance color formulasystem is being made available inDeltron 2000 formulations. All Radi-ance II Basecoats and Midcoats mustbe cleared. Radiance II colors arenot covered by the PPG Radiance colors are designed to be applied over properly cleaned, sanded andprimed Dry TimesTinting and AdditivesPainting of Flexible PartsRepair and RecoatApplyGround Coats: 2 coats or until hiding Mid-coats: 2 coats or until color is - mm or equivalentAir Pressure8 - 10 PSI at the cap for HVLP guns35 - 45 PSI at the gun for conventional gunsBetween Coats5 - 10 minutesDry Time to Clearcoat20-30 min. minimum at 70 F (21 C)24 hours maximumNote: After 24 hours, the DBC color must be sanded and additional color DataDBC RadianceDT Reducer DX 5711 oz per RTS* qt Pot life of the mixture is 1 hour at 70 F (21 C)(a) Ready-to-spray (1:1:.1, DBC:DT 885:DX 57)PropertiesVOC (Pkg.)

3 - (RTS)* - Solids by Volume (RTS) * 9 - 15%Sq. Ft. Coverage / US gal.(RTS) *(1 mil at 100% Transfer Efficiency)144 - 241 Film Build per - Dry - Time at 70 F (21 C)Dust Free Time10-15 minutesTack Free Time20-30 minutesTape Time30-60 minutesDBC color may be recoated with itself after a 15 minute dry time, or up to 24 hourswithout sanding. It may be sanded after 1 hour, if necessary, but more DBC colormust be applied. Avoid excessive film build of DBC DBC color may be applied to properly prepared flexible parts. Donot add flexible additives to DBC color can be tinted with DMD toners (DBC type) or other DBC colors. Cus-tom DBC Radiance colors may be created by adding up to a maximum of 3oz. (100 parts) of DMX toners to an unreduced quart of DBC 500. DX57 must be used in DBC Radiance II colors: both ground and Basecoat/Clearcoat +DP Epoxy PrimerK 36 Prima Surfacer +OEM Enamels +NCS 1990 SealerK 36 Prima SealerDCP 21 Urethane PrimerDX 54 Roadguard K 200/201 Primer Surfacer +KONDAR DZ Acrylic PrimerSurfacer +DPW Waterborne Primers#DPX 170 Self Etch Primer * #DP Epoxy Primer LFDPX 801 Plastics PrimerDX 1791 Self Etch Primer *NCP 250 NCT PrimerSurfacer +NCP Corrosion ResistantPrimerDPX 171 Non Chrome SelfEtch Primer *+ Must be Sanded* Must be Primed or SealedNCS 2K Sealer# Not Currently Available inCanadaP-211 Effective 1/98 Radiance IIRadiance IIBasecoatBasecoat* RTS = Ready to SprayMaterials described are designed for application by professional, trained personnel using proper equipment and are not intended for sale to the general public.

4 Products mentioned may be hazardous and should only be usedaccording to direction, while observing precautions and warning statements listed on label. Statements and methods described are based upon the best information and practices known to PPG Industries. Procedures forapplications mentioned are suggestions only and are not to be construed as representations or warranties as to performance, results or fitness for any intended use, nor does PPG Industries warrant freedom from patentinfringement in the use of any process set forth : The contents of this package must be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels of all compo-nents, since the mixture will have the hazards of all its parts. Improper spray technique may result in a hazardous condition. Follow spray equipment manufacturer s instructions to prevent personal injury or fire.

5 Followdirections for respirator use. Wear eye and skin protection. Observe all applicable Material Safety Data Sheet and Labels for additional safety information and handling MEDICAL OR SPILL CONTROL INFORMATION: (304) 843-1300; IN CANADA, (514) INDUSTRIES, INC., 19699 PROGRESS DRIVE, STRONGSVILLE, OH, 44136 PPG CANADA, INC., 2301 ROYAL WINDSOR DRIVE, MISSASSAUGA, ONTARIO, L5J 1K5 Any clear approved over DBCincluding; DCU 2042 CONCEPT Low VOCS peed Clear DCU 2001 CONCEPT Urethane Clear DCU 2050 Graffiti Resistant Clear# DU 1000 Polyurethane Clear System DCD 35 Delta Clear DCU 2002 CONCEPT Urethane Clear DCU 2119 Low VOC Clear# DCU 2021 CONCEPT Urethane Clear DCU 8200 CONCEPT Urethane Clear DCU 2035 DIAMOND COAT Plus Urethane Clear DCU 2020 CONCEPT Urethane Clear DCU 2060 Flexed N Flat Clear DCU 2082 Clear DCU 2055 CONCEPT Clear# Not currently available in CanadaCompatible ClearcoatsP-211 Effective 1/98 Radiance IIRadiance IIBasecoatBasecoatDAU Radiance colors are designed to be applied over properly cleaned, sanded andprimed BasecoatApplicationand Dry TimesApply3 coats or until hiding is achieved.

6 Before applyingthird coat of basecoat, mix equal parts of RTS*DAU 82 with RTS* DAU color. Apply this mixtureas the third coat of base Pressure5 - 10 PSI at the cap for HVLP guns40-50 PSI at the gun for conventional gunsBetween Coats15 - 20 minutesDry Time to Midcoat2 hr. minimum, but preferably overnight; 16 hr. at70 F (21 C). p-211 Effective 1/98 DAU Radiance BasecoatDT ReducerDAU 2 or 3111 Pot life of the mixture is 4-5 hours at 70 F (21 C)CompatibleSurfacesOEM BasecoatClearcoat +K 36 Prima Surfacer * +NCS 1990 CompliantSealerOEM Acrylic Enamels +K 36 Prima SealerDX 1791 Self Etch Primer *DPW WaterbornePrimers #K 200/201 PrimerSurfacer * +DPX 801 Plastics PrimerDP Epoxy PrimerNCP 250 NCT PrimerSurfacer * +NCS 2K SealersMixing MidcoatApplicationand Dry TimesApply2 coats or until desired color matching is - mm or equivalentAir Pressure5 - 10 PSI at the cap for HVLP guns40-50 PSI at the gun for conventional gunsBetween Coats15 - 20 minutesDry Time to Clearcoat2 hr.

7 Minimum at 70 F (21 C) up to 24 hr. Radiance MidcoatDT ReducerDAU 2 or 3111 Pot life of the mixture is 4-5 hours at 70 F (21 C)Tinting and AdditivesPainting of Flexible Parts Repair and RecoatDAU color may be recoated with itself after a 2 hr. dry time, or up to 24 hours withoutsanding. DAU may be repaired after a 24 hr. dry 82 may be tinted with DMX toners at a maximum of 3 oz per unreduced quart tocreate a custom Radiance ReducerDAU 2 HardenerDX 8142141 Pot life of this mixture is 4 hours @ 70 F (21 C)DP Epoxy Primer LFNCP Corrosion ResistantPrimer+ Must be sanded* Must be primed or sealed# Not currently available inCanadaTechnical DataPropertiesVOC (Pkg.) (RTS*) Solids by Volume (RTS*)20-26%Sq. Ft. Coverage / US gal. (RTS*)(1 mil at 100% Transfer Efficiency)320-417 Film Build per milRecommended Dry milDry Time at 70 F (21 C)Dust Free Time15 minutesTack Free Time90 minutesTape Time5-6 hoursRadiance II AcrylicRadiance II AcrylicUrethane SystemUrethane System* RTS = Ready to SprayAny clear approved over DAUincluding.

8 DAU 82 Delglo Clear DCU 8200 CONCEPT Urethane Clear DCD 35 Delta Clear DCU 2035 Diamond Coat Plus Urethane Clear DCU 2020 CONCEPT Urethane Clear DCU 2021 CONCEPT Urethane Clear DCU 2042 Concept Low VOC SpeedClear DCU 2001 CONCEPT Urethane Clear DCU 2050 Graffiti Resistant Clear # DCU 2002 CONCEPT Urethane Clear DCU 2119 Low VOC Clear #Compatible ClearcoatsP-211 Effective 11/97# Not currently available in CanadaMaterials described are designed for application by professional, trained personnel using proper equipment and are not intended for sale to the general public. Products mentioned may be hazardous and should only be usedaccording to direction, while observing precautions and warning statements listed on label. Statements and methods described are based upon the best information and practices known to PPG Industries. Procedures forapplications mentioned are suggestions only and are not to be construed as representations or warranties as to performance, results or fitness for any intended use, nor does PPG Industries warrant freedom from patentinfringement in the use of any process set forth : The contents of this package must be blended with other components before the product can be used.

9 Before opening the packages, be sure you understand the warning messages on the labels of all compo-nents, since the mixture will have the hazards of all its parts. Improper spray technique may result in a hazardous condition. Follow spray equipment manufacturer s instructions to prevent personal injury or fire. Followdirections for respirator use. Wear eye and skin protection. Observe all applicable Material Safety Data Sheet and Labels for additional safety information and handling MEDICAL OR SPILL CONTROL INFORMATION: (304) 843-1300; IN CANADA, (514) INDUSTRIES, INC., 19699 PROGRESS DRIVE, STRONGSVILLE, OH, 44136 PPG CANADA, INC., 2301 ROYAL WINDSOR DRIVE, MISSASSAUGA, ONTARIO, L5J 1K5 Radiance II AcrylicRadiance II AcrylicUrethane SystemUrethane SystemDDL Radiance colors are designed to be applied over properly cleaned, sanded andprimed BasecoatApplicationand Dry TimesApply3 coats or until hiding is achieved.

10 Before applyingthird coat of basecoat, mix equal parts of RTS*DCA 468 and RTS* DDL color. Apply this mixtureas the third coat of base Pressure5 - 10 PSI at the cap for HVLP guns40-50 PSI at the gun for conventional gunsBetween Coats10 minutesDry Time to Midcoat2 hour minimum at 70 F (21 C). p-211 Effective 11/97 DDL Radiance BasecoatDTL DZ AcrylicPrimer Surfacer +DPX 801 Universal PlasticPrimerDP Epoxy PrimerDPLF Epoxy PrimerDX 54 Roadguard DSX 1900 Bonding ClearDAS Del-Seal AcrylicSealersMixing MidcoatApplicationand Dry TimesApply2 coats or until desired color match is - mm or equivalentAir Pressure5 - 10 PSI at the cap for HVLP guns35 PSI at the gun for conventional gunsBetween Coats10 minutesDry Time to Clearcoat:12 hour minimum at 70 F up to 3 days DAU 75: 16-24 hours minimumDDL Radiance MidcoatDTL Thinner12 Painting of Flexible Parts Repair and RecoatDDL color may be recoated with itself after a 12 hour dry time, or up to 3 days ThinnerDX 369461 Pot life of this mixture is 2 hours at 70 F (21 C).