Page 1/6 SAFETY DATA SHEET - Pool supplies

1 Page 1/6 SAFETY data SHEETA ccording to Safe Work AustraliaPrinting date : . IDENTIFICATION: PRODUCT IDENTIFIER AND CHEMICAL IDENTITYP roduct Name: POOL PRO LIQUID CHLORINEO ther Name:Available chlorine: 10 - 13%Recommended Use of the Chemical and Restriction on Use:Dairy, food and beverage industries: Sanitising processing industry: Bleaching treatment: Sanitising of Manufacturer or Importer:The POPS Group Pty Ltd as Trustee for The Pool Shops Trust10-12 Cairns StreetLoganholme QLD 4129 Phone Number:07 3209 78841800 143 788 Emergency telephone number:1800 033 111+61 3 9663 2130 International2.

2 HAZARDS IDENTIFICATIONH azardous Nature:GHS05 corrosionSkin Corr. 1BH314 Causes severe skin burns and eye environmentAquatic Acute 1 H400 Very toxic to aquatic ElementsSignal WordDangerHazard StatementsH314 Causes severe skin burns and eye Very toxic to aquatic StatementsP260Do not breathe dust/fume/gas/mist/ protective gloves/protective clothing/eye protection/face release to the hands thoroughly after +P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skinwith +P351+P338 IF IN EYES: Rinse cautiously with water for several minutes.

3 Remove contact lenses, ifpresent and easy to do. Continue call a POISON CENTER or treatment (see on this label).P304+P340IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable contaminated clothing before +P330+P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.(Contd. on page 2)Page 2/6 SAFETY data SHEETA ccording to Safe Work AustraliaPrinting date : Name: POOL PRO LIQUID CHLORINE(Contd. of page 1) locked of contents/container in accordance with local/regional/national InformationAUH031 Contact with acids liberates toxic.

4 COMPOSITION AND INFORMATION ON INGREDIENTSC hemical Characterization: MixturesDescription:Mixture of substances listed below with nonhazardous Components:7681-52-9 Hypochlorous acid, sodium salt Skin Corr. 1B, H314; Aquatic Acute 1, H40010-<30%1310-73-2 Sodium hydroxide (Na(OH)) Skin Corr. 1A, H314<1%7732-18-5 Water>60%4 . FIRST AID MEASURESI nhalation:If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give immediate medical Contact:Remove contaminated clothing and wash affected areas with soap and water.

5 Seek immediate medicalattention. Launder clothing before Contact:In case of eye contact, check for and remove any contact lenses. Immediately irrigate eyes with plenty ofrunning water for at least 15 minutes, keeping eyelids open. Seek immediate medical :If swallowed, do not induce vomiting. Wash mouth with water. Never give anything by mouth to anunconscious person. Seek immediate medical for DoctorTreat . FIRE FIGHTING MEASURESS uitable Extinguishing Media:Water fog (or if unavailable fine water spray), foam, dry agent (carbon dioxide, dry chemical powder).

6 Specific Hazards Arising from the ChemicalDecomposes on heating emitting toxic chlorine material. Substance releases oxygen when heated, which may increase the severity of anexisting water spray to cool fire-exposed Protective Equipment and Precautions for Fire FightersWear Safe Work Australia approved self-contained breathing apparatus and full protective . ACCIDENTAL RELEASE MEASURESP ersonal Precautions, Protective Equipment and Emergency Procedures:Wear Safe Work Australia approved self-contained breathing apparatus and full protective clothing.

7 Evacuateall non-essential personnel from affected area. Ensure adequate ventilation. Do not breathe vapours.(Contd. on page 3)Page 3/6 SAFETY data SHEETA ccording to Safe Work AustraliaPrinting date : Name: POOL PRO LIQUID CHLORINE(Contd. of page 2) Precautions:In the event of a major spill, prevent spillage from entering drains or water and Materials for Containment and Cleaning Up:Stop leak if safe to do so and absorb spill with sand, earth, vermiculite or some other absorbent the spilled material and place into a suitable container for disposal.

8 Slippery when spilt. Avoidaccidents. Clean up . HANDLING AND STORAGEP recautions for Safe Handling:Use of safe work practices are recommended to avoid eye or skin contact and inhalation of vapours. Use onlyoutdoors or in a well-ventilated precautionary measures against static discharge. Food, beverages and tobacco products should not bestored or consumed where this material is in use. Always wash hands before smoking, eating, drinking orusing the toilet. Wash contaminated clothing and other protective equipment before storage or re-use.

9 Provideeyewash fountains and SAFETY showers in close proximity to points of potential for Safe Storage:Store in a cool, dry, well ventilated place and out of direct sunlight. Keep containers closed when not in from heat. Store away from incompatible materials. Check regularly for . EXPOSURE CONTROLS AND PERSONAL PROTECTIONE xposure Standards (Safe Work Australia):1310-73-2 Sodium hydroxide (Na(OH))NES TWA: 2* mg/m *Peak limitation7782-50-5 chlorineNES TWA: 3* mg/m , 1* ppm*Peak limitationEngineering Contols:Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapour belowoccupational exposure Protective Equipment (PPE):Respiratory Protection.

10 Use an Safe Work Australia approved full face supplied air respirator if high airborne concentrations of thematerial are present. See Australian Standards AS/NZS 1715 and 1716 for more Protection:Impervious gloves, protective clothing, chemical resistant apron and SAFETY boots. See Australian StandardsAS/NZS 2161, and for more and Face Protection: SAFETY glasses with top and side shields or goggles. See Australian Standards AS/NZS 1336 and 1337 formore . PHYSICAL AND CHEMICAL PROPERTIESA ppearance:Form:LiquidColour:Pale yellow-greenOdour:Slight chlorine odourOdour Threshold:No information available(Contd.)