Page 1/8 Safety data sheet - Alfa Laval

1 page 1 /8 Safety data sheetaccording to 1907/2006/EC, Article 31 Printing date : number 1: Identification of the substance/mixture and of the company/undertaking Product identifier Trade name: Zeniplex 1 Article number:9AB68Q Relevant identified uses of the substance or mixture and uses advised againstNo further relevant information available. Application of the substance / the preparationLubricant Details of the supplier of the Safety data sheet Manufacturer/Supplier:Alfa Laval Tumba ABHans Stahles v g 7S-147 80 TumbaSweden+46 8 530 650 details for all countries are continually updated on our visit to access the latest version of Alfa Laval 's SDS is available on our website. Further information obtainable Emergency telephone number:For immediate, life-threatening emergencies, call 999 For health advice and information (24h) dial 111 (NHS direct)SECTION 2: Hazards identification Classification of the substance or mixture Classification according to Directive 67/548/EEC or Directive 1999/45/ECNot applicable.

2 Information concerning particular hazards for human and environment:The product does not have to be labelled due to the calculation procedure of the "General Classificationguideline for preparations of the EU" in the latest valid version. Classification system:The classification is according to the latest editions of the EU-lists, and extended by company andliterature data. Label elements Labelling according to EU guidelines:The product has been marked in accordance with EU Directives / respective national product is not subject to identification regulations under EU Directives and the Ordinance onHazardous Materials (German GefStoffV). Other hazards Results of PBT and vPvB assessment PBT:Not applicable.(Contd. on page 2) GBPage 2/8 Safety data sheetaccording to 1907/2006/EC, Article 31 Printing date : number 3 Trade name: Zeniplex 1(Contd. of page 1 ) vPvB:Not 3: Composition/information on ingredients Mixtures Description:Lubricant base stock(CAS-no 64742-53-6 and 64742-52-5)>75%Aluminum-soap grease complexes(CAS-no 637-12-7 and 555-32-8)<14%Sulphur-phosphorous EP additive<5%9003-29-6 Polybutenesubstance with a Community workplace exposure limit<5%Styrene-ester copolymer additive>1% Dangerous components:Void Additional information:For the wording of the listed risk phrases refer to section 4: First aid measures Description of first aid measures General information:Immediately remove any clothing soiled by the case of accident or if you feel unwell, seek medical advice immediately (show the label wherepossible).

3 After inhalation:Supply fresh air; consult doctor in case of complaints. After skin contact:Immediately wash with water and soap and rinse skin irritation continues, consult a doctor. After eye contact:Rinse opened eye for several minutes under running water. If symptoms persist, consult a contact lenses, if present and easy to do. Continue rinsing. After swallowing:Rinse out mouth and then drink plenty of NOT induce a doctor/physician. Most important symptoms and effects, both acute and delayedRough skin. May cause skin dryness and irritation. Indication of any immediate medical attention and special treatment neededNo further relevant information available. GB(Contd. on page 3)Page 3/8 Safety data sheetaccording to 1907/2006/EC, Article 31 Printing date : number 3 Trade name: Zeniplex 1(Contd. of page 2) 5: Firefighting measures Extinguishing media Suitable extinguishing agents:Water hazeFoamFire-extinguishing powderCarbon dioxideUse fire extinguishing methods suitable to surrounding conditions.

4 For Safety reasons unsuitable extinguishing agents:Not applicable. Special hazards arising from the substance or mixtureDuring heating or in case of fire poisonous gases are monoxide and carbon dioxideHydrocarbonsIrritating organic vapors Advice for firefighters Protective equipment:Wear self-contained respiratory protective fully protective suit. Additional informationCool endangered receptacles with water 6: Accidental release measures Personal precautions, protective equipment and emergency proceduresDo not breathe skin and eye contactParticular danger of slipping on leaked/spilled protective equipment. Keep unprotected persons away. Environmental precautions:Do not allow to enter sewers/ surface or ground water. Methods and material for containment and cleaning up:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Pick up for recovery or disposal in suitable receptacles.

5 Reference to other sectionsSee Section 7 for information on safe Section 8 for information on personal protection Section 13 for disposal 7: Handling and storage Precautions for safe handlingWhen using do not eat, drink or not breathe contact with skin and release to the receptacles tightly sealed.(Contd. on page 4) GBPage 4/8 Safety data sheetaccording to 1907/2006/EC, Article 31 Printing date : number 3 Trade name: Zeniplex 1(Contd. of page 3) Section 8 for information on personal protection equipment. Information about fire - and explosion protection:Keep ignition sources away - Do not against electrostatic charges. Conditions for safe storage, including any incompatibilities Storage: Requirements to be met by storerooms and receptacles:Store in cool, dry conditions in well sealed receptacles. Information about storage in one common storage facility:Store away from oxidizing agents.

6 Further information about storage conditions:Protect from heat and direct receptacle in a well ventilated area. Specific end use(s)LubricantRestricted to professional 8: Exposure controls/personal protection Additional information about design of technical facilities:No further data; see item 7. Control parameters Ingredients with limit values that require monitoring at the workplace:9003-29-6 PolybuteneCONTROL PARAMETERS Short-term value: 3 mg/m Long-term value: 1 mg/m Oil mist, mineral working fluids Additional information:The lists valid during the making were used as basis. Exposure controls Personal protective equipment: General protective and hygienic measures:Use only in well-ventilated contact with the eyes and hands before breaks and at the end of that washing facilities are available at the work away from foodstuffs, beverages and not carry product impregnated cleaning cloths in trouser off contaminated clothing and wash before reuse.

7 Respiratory protection:Use suitable respiratory protective device in case of insufficient ventilation. Protection of hands:The glove material has to be impermeable and resistant to the product/ the substance/ the of the glove material on consideration of the penetration times, rates of diffusion and thedegradation Material of gloves(Contd. on page 5) GBPage 5/8 Safety data sheetaccording to 1907/2006/EC, Article 31 Printing date : number 3 Trade name: Zeniplex 1(Contd. of page 4) selection of the suitable gloves does not only depend on the material, but also on further marks ofquality and varies from manufacturer to manufacturer. As the product is a preparation of severalsubstances, the resistance of the glove material can not be calculated in advance and has therefore tobe checked prior to the application. Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and hasto be observed.

8 Eye protection: Safety glasses Body protection:Protective work clothingSECTION 9: Physical and chemical properties Information on basic physical and chemical properties General Information Appearance:Form:Highly viscousColour:Yellowish Odour:Mineral-oil-like Odour threshold:Not determined. pH-value:Not determined. Change in conditionMelting point/Melting point/Boiling range:Undetermined. Flash point:Not applicable. Flammability (solid, gaseous):Not applicable. Ignition temperature:Decomposition temperature:Not determined. Self-igniting:Product is not selfigniting. Danger of explosion:Product does not present an explosion hazard. Explosion limits:Lower:Not :Not determined. Vapour pressure:<0,1 (38 C / 100 F) Density at 25 C:<1 g/cm Relative densityNot determined. Vapour density>8 (air = 1)(Contd. on page 6) GBPage 6/8 Safety data sheetaccording to 1907/2006/EC, Article 31 Printing date : number 3 Trade name: Zeniplex 1(Contd.)

9 Of page 5) Evaporation rate< (Ethyl ether = 1) Solubility in / Miscibility withwater:Insoluble. Partition coefficient (n-octanol/water):Not determined. Viscosity:Dynamic:Not :Not determined. Solvent content:Organic %Solids % Other informationNo further relevant information 10: Stability and reactivity ReactivityThe material is stable under recommended storage and handling conditions. Chemical stability Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications. Possibility of hazardous reactionsReacts with strong oxidizing agents. Conditions to avoidHigh heatKeep away from sources of ignition - No smoking. Incompatible materials:Store away from oxidizing agents. Hazardous decomposition products:No further information, refer to section 11: Toxicological information Information on toxicological effects Acute toxicity: Primary irritant effect: on the skin:Rough skin.

10 May cause skin dryness and and / or repeated skin contact may cause irritation on the eye:Contact with eyes may result in mild irritation. Sensitization:No sensitizing effects known. Other information (about experimental toxicology):If the product is overheated, fumes and vapors may be irritating to the upper respiratory tract and studies have shown that petroleum hydrocarbons and synthetic lubricants are potential healthrisks, which vary from person to person. As a precaution any exposure to the product (liquid, vapor,smoke and fog) is to be minimized. Additional toxicological information:The product is not subject to classification according to the calculation method of the General EUClassification Guidelines for Preparations as issued in the latest version.(Contd. on page 7) GBPage 7/8 Safety data sheetaccording to 1907/2006/EC, Article 31 Printing date : number 3 Trade name: Zeniplex 1(Contd.)