Pauluhn™ DLL - Cooper Industries

1 LED lighting for land-based rigsPauluhn DLL LED Luminaires pauluhn DLLLED luminaires for land-based drillingPauluhn DLL Series LEDsSafe. LED?Why Crouse-Hinds?Useful lifeRated life is up to 60,000 hours of maintenance-free and safe operationEnergy efficiencyLED average energy consumption is 65% less than T12, T8 and T5HO fluorescent fixtures Start/restart timeInstant illumination vs. 10 minute restrike time for fluorescentLight qualityHigher color rendering and color temperature compared to fluorescentEnvironmental benefitsMercury-free LED eliminates disposal costs and lower energy consumption for a smaller carbon footprintIndustry-best reliabilityBuilt to withstand extreme temperatures, vibration, water and dustThermal managementEffective heat sinking ensures longer lifeQuality of lightCustom optics designed to maximize light distribution and intensityRetrofit compatibilityLED fixtures are compatible with pauluhn DuraPro, MagnaPro, Rig-A-Lite and Snelson fluorescent fixturesFeaturing the industry's broadest range of LED luminaires for harsh and hazardous environments.

2 Eaton's Crouse-Hinds can deliver a lighting solution that performs reliably in even the worst operating conditions. All the while reducing your energy, maintenance and manpower Rig 89 LOCATION: Gillette, WyomingDETAILS: Rig retrofit with pauluhn DLL4 LEDsEATON'S CROUSE-HINDS pauluhn DLL Series LED LuminairesWhy pauluhn DLL LED?Designed for drilling. pauluhn DLL linear LED luminaires are engineered to stand up to the demanding conditions faced on land-based drilling rigs. The DLL stands up to high vibration, hose down, shock and impact, while delivering long life and high lumen performance for up to 20 optics: Standard wide (120 ) beam spread for control room and indoor application maximizes illumination on wall panels Narrow (80 ) beam spread option for high mast/derrick application avoids spillage and light lossComprehensive certifi cation: Single model certified for use in Class I, Division 2 and Class II, Division 2 harsh and hazardous applicationsBuilt to last: Ingress protection from hose down water or diesel fuel in harsh operational conditions passed 2,000 psi high pressure test Vibration-, impact- and shock-resistant passed 5G, 3-axis vibration test 60,000 hour lifetime @ 55 C ambientSlim profi le.

3 " fixture height (excluding mounting brackets) Perfect for mounting in confined or low height areasQuick & easy installation: Easy access to drivers and wiring No custom brackets or hardware needed Seven mounting options available Easily retrofit to pauluhn DuraPro and MagnaPro, Rig-A-Lite and SnelsonCase study: land-rig retrofi tLocation: Ensign Rig 122, Vernal, UtahChallenge: Ensign was looking for a rugged, low maintenance solution to replace existing pauluhn DuraPro fl uorescent fi xtures on a drilling : Install pauluhn DLL 2 foot linear LED luminairesResults: Ensign was easily able to replace 21 DuraPro fi xtures with 14 DLLs in only about an hour by using the existing DuraPro brackets. Ensign saw better light quality on the mast and deck, while reducing amperage load and eliminating lamp 'S CROUSE-HINDS pauluhn DLL Series LED Luminaires4 Applications:Land-based and offshore rigs; areas include: derrick, mast, SCR house, top drive , operator's house, power and pump DLL Series LED LuminairesThe pauluhn DLL linear LED by Eaton s Crouse-Hinds is specifi cally designed to replace fl uorescent T12, T8 and T5HO lighting on land-based and offshore drilling platforms.

4 The rugged and durable design features the industry s most versatile and fl exible mounting options. The pauluhn DLL is the ideal solution for high vibration, impact and hose down in drilling consumption comparisonKey features & benefits: High efficacy: up to 120 LPW -40 C to +65 C ambient operating temperature (standard model) Low profile fixture (<3" height) Versatile ceiling/swivel, wall, flush, pole and pendant mounting options Wide and narrow optics for uniform illumination in control room and drill mast Four points of secondary retention 2,000 psi high pressure hose rated High vibration resistance Emergency battery back-up (90 minutes) and surge protection options (up to 10kV) DesignLights Consortium Qualified (some models are not DLC qualified)* 5 year fixture warranty One year warranty* Refer to Qualified Products List under Family Models for full listing details.

5 Not all models are approved for all application categories. Refer to page 2 of the D-0716 authorized distributor price book for Crouse-Hinds standard Terms and foot DLL linear LED vs. fluorescentEnergy consumption (watts)T12HO9070503080604020010T5 HOT8T8 HOT12T5 DLL2 All luminaires in the comparison are 2 lamp, 4 footAll luminaires in the comparison are 2 lamp, 2 foot4 foot DLL linear LED vs. fluorescent140100601601208040020 Energy consumption (watts)T12 HOT5 HOT8T8 HOT12T5 DLL4 EATON'S CROUSE-HINDS pauluhn DLL Series LED LuminairesModelTypical lumens WattageLumens per wattEquivalent HID luminaireTypical energy savings / lifetimeDLL47,90063130T12 HOUp to 58%T8 HOUp to 54%T5 HOUp to 43%T12Up to 37%T8Up to 22%T5Up to 10%ModelTypical lumens WattageLumens per wattEquivalent HID luminaireTypical energy savings / lifetimeDLL23,95832124T12 HOUp to 63%T8 HOUp to 59%T5 HOUp to 47%T12Up to 36%T8Up to 25%T5Up to 9%DLL2 DLL4 Lumen output3,9587,900 Frequency50/60 Hz50/60 HzVoltage100-277 VAC/108-250 VDC.

6 347-480 VACE lectrical ratings:ModelVoltageCurrent (A)Wattage (W)Power factorTHDDLL2 <20%DLL2 <20%DLL2 <20%DLL2 <20%DLL4 <20%DLL4 <20%DLL4 <20%DLL4 <20%5 Certifi cations:NEC standards: Class I, Division 2, Groups A, B, C, D Class II, Division 2, Groups F, G Class I, Zone 2 Class III NEMA 4X; IP66 Marine and wet locationsUL standards: UL844 Electrical Fixture Hangers for Hazardous Locations UL1598 Luminaire UL1598A Luminaire for Installation on Marine Vessels UL924 for Emergency LightingCSA standard: No. 137 Additional certifi cations: ABS design assessedMaterials:Housing: Copper-free aluminum Optional Corro-free epoxy powder coat Lens: Clear or diffused or polycarbonate Mounting:Versatile mounting options: Flush back mount Swivel/ceiling back mount Offset ceiling mount Offset wall mount Pole mount Pendant mountEasily retrofi t to: Existing pauluhn DuraPro and MagnaPro fluorescent light fixtures Rig-A-Lite and Snelson C1D2 fluorescent lighting fixturesTemperature codes:Simultaneous ratingAmbient temperatureMin.

7 Temp. wire supplyClass I, Div. 2 Class II, Div. 2 Class I, Div. 2, Class II, Div. 240 C60 CT6T6T655 C75 CT5T5T565 C90 CT5T5T5 'S CROUSE-HINDS pauluhn DLL Series LED LuminairesSpecifications6 Photometrics: high mast derrickPhotometrics: control room/pump shed4 foot DLL LED with 80o optics vs. 4 foot 2 lamp T8 DuraPro4 foot DLL LED with 80o optics vs. 4 foot. 2 lamp T5HO DuraProDLL4N/UNV1DP4-2T5 HODLL4N/UNV1DP4-2T5 HOQTY=19 QTY=19 Average footcandlesModelDLL4N/UNV1DP4-2T5 HOSide lower energy consumptionand higher average illumination on the 1 Side 2 DrillDrillSide 3 Side 1 Side 2 Side 313 lower fixture count (19 ) and higher average illumination on the footcandlesModelDLL4N/UNV1DP4-2T8 Side 1 Side 2 DrillDrillSide 3 Side 1 Side 2 Side 313 footcandlesModelDLL2/UNV1MP4-2T8 Wall foot DLL LED with 120o optics vs.

8 4 foot 2 lamp T8 MagnaPro64% lower energy consumption and higher average illumination on floorMP4-2T8 DLL2/UNV1MP4-2T8 Wall 1 Wall 2 Wall 3 Wall 4 Wall 1 Wall 2 Wall 3 Wall 430 height = 9 height = 9 'S CROUSE-HINDS pauluhn DLL Series LED Luminaires7 EATON'S CROUSE-HINDS pauluhn DLL Series LED LuminairesDLL4 DLL2( ) ( ) Ordering informationDimensions & mounting options:( ) ( ) ( ) Offset wall Flush ceilingOffset ceilingCeiling/swivelCeiling and adapterPole mountPendant mountDP1052 MTKDP1057 MTKDP1053 MTKDP1050 MTKMP1054 MTK KITPM KIT HAZ KITA ccessories (ordered separately)DP1057 MTKF lush/back mount back plate (compatible with DuraPro)DP1050 MTKC eiling/swivel mount (compatible with DuraPro)DP1053 MTKC eiling/wall mount offset (compatible with DuraPro)MP1054 MTK KITC eiling mount bracket and adapter kit (compatible with MagnaPro)DP1052 MTKO ffset wall mount (compatible with DuraPro)PM KIT mount kit, conduitPM KIT mount kit, conduitPM KIT mount kit, conduitAccessories (ordered separately)PEND HAZ KITP endant mount kitSS KITS afety chain kitVMVL/UNV1 80W 1A KIT1 amp driver replacement kit 100-277 VAC for 4 ft.

9 LinearVMVL/UNV34 80W 1A KIT1 amp driver replacement kit 347-480 VAC for 4 ft. linearVMVL/UNV1 80W amp driver replacement kit 100-277 VAC for 2 ft. linearVMVL/UNV34 80W amp driver replacement kit 347-480 VAC for 2 ft. linearPart number exampleDLL4N/UNV1 S903 TF P EMDLL series linear LED, cool white, 4 foot, hubs, 80 narrow light pattern, 100-277 VAC driver, polycarbonate lens, through feed hubs, painted, battery back-upDLL4N/UNV1S903 TFEM1 PSeriesDLLP auluhn DLL series linear LED luminaireOptionsTFPull wire included in fixtureLength/lumens44 foot length, 7,900 lumens22 foot length, 3,900 lumensVoltage/UNV1100-277 VAC; 108-250 VDC/UNV34347-480 VACF inishBLANKN atural aluminumPPainted (gray, epoxy)WHPainted (white, epoxy)LensS903 Clear polycarbonateS903 DDiffused polycarbonateOpticsBLANKWide (120 )NNarrow (80 )Emergency backupBLANKS tandard model(no battery back-up)EM1*Integrated emergency battery back-up* One year warranty.

10 Remote EM Kit also available, 120-277 VAC only. Contact factory for more options[ ] [ ] mountDP1050 MTKPole mountPM KIT mountMP1054 MTK ALL MEASUREMENTS IN INCHESC onfigurationABCDPM KIT KIT KIT 'S CROUSE-HINDS pauluhn DLL Series LED Luminaires9 EATON'S CROUSE-HINDS pauluhn DLL Series LED LuminairesMounting wallDP1052 MTKO ffset ceiling/wall 3669 ABBAF lush ceilingDP1057 MTK10 EATON'S CROUSE-HINDS pauluhn DLL Series LED LuminairesMounting options Pendant mount - Class I, Div. 2 onlyPEND HAZ 'S CROUSE-HINDS pauluhn DLL Series LED LuminairesChamp DLL linear LED luminaires are now available with an integral battery back-up module. Virtually the same size as the standard 4 foot model and up to 90 minutes of emergency lighting to keep your facility and people back-upDimensions:NEC/CEC Class I, Division 2, Groups A, B, C, D Class II, Division 2, Groups F, G Wet Location, IP66, Type 4 XCSA Standard CSA Nos.