PEEK Data Sheet 물성표 - hpmkorea.com

1 PEEKPEEKPEEKPEEKN aturalHPVGF30CA30 Color - --Grey / BlackBlackGreyBlackDensity - ISO 1183-1g/cm absorption: - - after 24/96 h immersion in water of 23 CISO 62mg5 / 104 / 95 / 104 / 9 ISO 62% / / / / at saturation in air of 23 C / 50 % RH-% at saturation in water of 23 C-% PropertiesMelting temperature (DSC, 10 C/min) - ISO 11357-1/-3 C340340340340 Glass transition temperature (DSC, 20 C/min) - ISO 11357-1/-2 C----Thermal conductivity at 23 C - -W/( ) of linear thermal expansion - - average value between 23 and 100 C-m/( )50 x 10-635 x 10-630 x 10-625 x 10-6- average value between 23 and 150 C-m/( )55 x 10-640 x 10-630 x 10-625 x 10-6- average value above 150 C-m/( )

2 130 x 10-685 x 10-665 x 10-655 x 10-6 Temperature of deflection under load - - method A: MPaISO 75-1/-2 C160195230260 Max. allowable service temperature in air - - for short periods (4)- C310310310310- continuously : for min. 20,000 h- C250250250250 Min. service temperature - - C-50-20-20-20 Flammability - - "Oxygen Index"ISO 4589-1/-2%35434040- according to UL 94 ( / 3 mm thickness)--V-0 / V-0V-0 / V-0V-0 / V-0V-0 / V-0 Mechanical Properties at 23 CTension test - - tensile stress at yield / tensile stress at breakISO 527-1/-2 MPa115 / -NYP / 7880 / -NYP / 144- tensile strengthISO 527-1/-2 MPa1157880144- tensile strain at yieldISO 527-1/-2% tensile strain at breakISO 527-1/-2% tensile modulus of elasticityISO 527-1/-2 MPa4300590070009200 Compression test - - compressive stress at 1 / 2 / 5 % nominal strainISO 604 MPa38 / 75 / 14046 / 80 / 12054 / 103 / 15569 / 125 / 170 Charpy impact strength - unnotched - ISO 179-1/1eUkJ/m no break252550 Charpy impact strength - notched - ISO 179-1/1eAkJ/m indentation

3 Hardness - ISO 2039-1N/mm 210215250310 Rockwell hardness - ISO 2039-2-M 105M 85M 100M 102 Electrical Properties at 23 CElectric strength - IEC 60243-1kV/mm24-24-Volume resistivity - IEC > 10 14-> 10 14< 10 5 Surface resistivity - ANSI/ESD STM Ohm/sq.> 10 13-> 10 13< 10 5 Relative permittivity er: - at 100 Hz - IEC permittivity er: - at 1 MHz IEC dissipation factor tan d: - at 100 Hz - IEC dissipation factor tan d: - at 1 MHzIEC tracking index (CTI) - IEC 60112-150-175-PEEK Data Sheet UnitsTest methodsPROPERTIES