Example: tourism industry

PERFORMANCE electric water heaters are NAECA and HUD ...

Fuel TypeDescriptionNominalGallonCapacityRate dGallonCapacityModel NumberRecovery in F RiseFirst TankHeightAHeight to water CShip Weight(LBS.)UniformEnergy Factor(UEF)ElectricTall4036XE40T06MH45U1 215348-1/240-1 electric water heaters are NAECA and HUD certified for manufactured housing and modular constructionEfficiency .92 - .93 UEF Isolated tank design reduces conductive heat loss Dual 4500W copper heating elementsPerformance FHR: Up to 53 gallons, based on model Recovery: 21 GPH for 4500 watts at a 90 F rise** Longer Life Premium grade anode rod provides long-lasting tank protectionFeatures High PERFORMANCE and lower operating cost Side inlet and outlet connections Compliant with , ASHRAE 90A-80 and NAECA requirements electric junction box located above heating elements for easy installation Over-temperature protector cuts off power in excess temperature situations Automatic thermostat keeps water at desired Temperature

Manufactured Housing 30 and 40-Gallon Capacities 240 Volt AC/Single Phase Double Element Models ® Electric Manufactured Housing Specifications 10/17 FORM NO. THD-PEMH N Rev. 3 In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.

Tags:

  Housing, Manufactured, Manufactured housing

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of PERFORMANCE electric water heaters are NAECA and HUD ...

1 Fuel TypeDescriptionNominalGallonCapacityRate dGallonCapacityModel NumberRecovery in F RiseFirst TankHeightAHeight to water CShip Weight(LBS.)UniformEnergy Factor(UEF)ElectricTall4036XE40T06MH45U1 215348-1/240-1 electric water heaters are NAECA and HUD certified for manufactured housing and modular constructionEfficiency .92 - .93 UEF Isolated tank design reduces conductive heat loss Dual 4500W copper heating elementsPerformance FHR: Up to 53 gallons, based on model Recovery: 21 GPH for 4500 watts at a 90 F rise** Longer Life Premium grade anode rod provides long-lasting tank protectionFeatures High PERFORMANCE and lower operating cost Side inlet and outlet connections Compliant with , ASHRAE 90A-80 and NAECA requirements electric junction box located above heating elements for easy installation Over-temperature protector cuts off power in excess temperature situations Automatic thermostat keeps water at desired Temperature and pressure relief valve included Low lead compliantWarranty 6-Year limited warranty for tank and parts.

2 1-year full in-home labor warranty**See written warranty for complete detailsUnits meet or exceed ANSI requirements and have been tested according to procedures. Units meet or exceed the energy efficiency requirements of NAECA , ASHRAE standard 90, ICC Code and all state energy efficiency PERFORMANCE Housing30 and 40-Gallon Capacities240 Volt AC/Single PhaseDouble Element Models electric manufactured housing Specifications10/17 FORM NO. THD-PEMH N Rev. 3 In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without water Heating 1115 Northmeadow Parkway, Suite 100 Roswell, Georgia 30076 Uniform Energy Factor and rated gallon capacity based on Department of Energy (DOE) requirements.

3 heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt heating elements. * *Recovery calculations used are based on 4500 watt elements used in non-simultaneous operation. **Recovery = x temp. rise : 4500W = 21 GPH x 90 CABRELIEFVALVECOLDINLET3"HOTOUTLETWATER CONNECTIONS ALL 3/4" COLDOUTLETHOTOUTLETJUNCTIONBOXANODE LEED Point = 1


Related search queries