Example: biology

PH pgs. 130-139 (8/03) - Cooper Industries

Concrete Inserts Concrete Inserts Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro- Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating, DURA GREEN and other special coatings are available upon request.

Concrete Inserts Concrete Inserts 196 Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in …

Tags:

  Industreis, Cooper industries, Cooper, Ph pgs, 130 139, 8 03

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of PH pgs. 130-139 (8/03) - Cooper Industries

1 Concrete Inserts Concrete Inserts Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro- Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating, DURA GREEN and other special coatings are available upon request.

2 Approvals (as noted). Items in this section are Underwriters Laboratories Listed and comply with Federal Specification WW-H-171E & A-A-1192A. or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. Eaton 195 B-Line series Pipe Hangers & Supports Concrete Inserts B3019 - Adjustable Metal Deck Ceiling Bolt B. Size Range: 3/8"-16 thru 3/4"-10 rod D. Material: Steel D. Function: For use in metal deck formed concrete to attach Steel Size Underside of anchor bolt hanger rods.

3 Allows for pre-positioning of hanger rods in poured to bottom of plate concrete decks. Thread Size 'A' with Finish: Plate: Plain Steel. Rod: Electro-Galvanized. Contact Thread Length 'C'. Cooper B-Line for alternative finishes and materials. Order By: Part number and finish. Contact customer service for custom rod lengths. Concrete Inserts Thread Thread Approx. Size A B Length C D Steel Size Design Load Part No. in. (mm) in. (mm) in. (mm) in. (mm) Lbs (kN) Lbs. (kg). B3019-3/8 3/8"-16 21/2" ( ) 63/8" ( ) 11/4" ( ) 7 Ga. x 11/4" x 10" ( x x ) 730 ( ) 80 ( ).

4 B3019-1/2 1/2"-13 21/2" ( ) 61/2" ( ) 11/4" ( ) 7 Ga. x 11/4" x 10" ( x x ) 1350 ( ) 99 ( ). B3019-5/8 5/8"-11 21/2" ( ) 63/4" ( ) 11/4" ( ) 7 Ga. x 11/4" x 10" ( x x ) 2160 ( ) 129 ( ). B3019-3/4 3/4"-10 21/2" ( ) 63/16" ( ) 21/4" ( ) 1/4" x 3" x 10" ( x x ) 3230 ( ) 238 ( ). B2499 - Concrete Insert Size Range: 5/8"-11 thru 11/2"-6 rod Material: Steel Function: Designed to be embedded in concrete to provide a point of support for 5/8"-11 thru 11/2"-6 rod or bolt sizes . A. Finish: Plain anchor bolt with Electro-Galvanized coupling. B.

5 Contact B-Line for alternative finishes and materials. Note: For rod sizes 3/8"-16 and 1/2"-13, refer to B2501 A. see page 198. 3/16" Dia. ( ). Order By: Part number and rod size. For 11/8"-7, 11/4"-6, and 11/2"-6 consult factory. Min. Max. Recommended Loads Rod Embedment (In 3000 lb. ( ) Approx. Size A B Hard Rock Concrete) Part No. in. (mm) in. (m) lbs. (kN) lbs. (kg). B2499-5/8 5/8"-11 3" ( ) 31/2" ( ) 1810 ( ) ( ). B2499-3/4 3/4"-10 3" ( ) 31/2" ( ) 2710 ( ) ( ). B2499-7/8 7/8"-9 3" ( ) 4" ( ) 3770 ( ) ( ). B2499-1 1"-8 3" ( ) 4" ( ) 4960 ( ) ( ).

6 Consult factory for specifications on rod sizes 11/8"-7, 11/4"-6, and 11/2"-6. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 196 Eaton Concrete Inserts TOLCO Fig. 109A - Concrete Deck Insert - Hanger Application Component of State of California OSHPD Approved Size Range: 3/8"-16 thru 7/8"-9 rod Seismic Restraints System Material: Steel 109A-3/8. Function: For use in metal deck formed concrete to attach hanger 109A-1/2.

7 Rods. Allows for pre-positioning of hanger rods in poured concrete decks. Approvals: 3/8" - 5/8" rod size is Underwriters Laboratories listed in the USA (UL) and Canada (cUL). Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraints Systems Guidelines. Finish: Plate: Plain Steel. Rod: Electro-Galvanized. Contact customer service for alternative finishes and materials.

8 Standard Bolt Order By: Part number, rod size and finish. Contact customer service Length for custom rod lengths. 8 ( ). 25/8 . Concrete Inserts ( ) 1 ( ). Minimum 1 . 109A-5/8 & 109A-3/4. A. Fig. 109A. 12 (305mm) 1 ( ) 12 (305mm) 1 ( ) 12 (305mm) 1 ( ). Minimum Minimum Minimum Minimum Minimum Minimum 25/8 25/8 25/8 . ( ) ( ) ( ). Edge of Concrete Edge of Concrete Edge of Concrete 1 ( ). Minimum Fig. 109A. Fig. 109A Fig. 109A. Rod Max. Max. Hanger Max. Recommended Approx. NOTES: Size Pipe Size Spacing Loads 1. Mounting holes are standard.

9 If the Part No. in. (mm) in. (m) lbs. (kN) lbs. (kg) plate is not mechanically secured to 109A-3/8 3/8"-16 4" ( ) 15'-0 ( ) 572 ( ) ( ) the deck ribs, a jam nut is required to prevent the anchor bolt from laying 109A-1/2 1/2"-13 8" ( ) 15'-0 ( ) 579 ( ) ( ) over when concrete is poured. 109A-5/8 5/8"-11 Contact Factory 715 ( ) ( ) 2. Minimum spacing between inserts 109A-3/4 3/4"-10 Contact Factory 1000 ( ) ( ) shall be not less than 41 2" ( ). for 3 8" and 6" ( ) for 1 2". 109A-7/8 7/8"-9 Contact Factory 1000 ( ) ( ). Max. Recommended Loads shown include safety factor of 5.

10 Weight is based on the standard bolt length. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. Eaton 197 B-Line series Pipe Hangers & Supports Concrete Inserts B2501 - Light Duty Spot Insert - Hanger Application Size Range: 3/8"-16 & 1/2"-13 rod Material: Steel Standard Finish: Electro-Plated Approvals: 3/8" & 12" rod sizes are Underwriters Laboratories listed in the USA (UL) and Canada (cUL). Service: Designed to be embedded in concrete for attachment of 3.


Related search queries