PL-2303HX Edition (Chip Rev D) USB to Serial Bridge ...

1 PL-2303HX Edition (Chip Rev D) USB to Serial Bridge Controller Product Datasheet Document Revision: Document Release: March 20, 2013 Prolific Technology Inc. 7F, No. 48, Sec. 3, Nan Kang Rd. Nan Kang, Taipei 115, Taiwan, Telephone: +886-2-2654-6363 Fax: +886-2-2654-6161 E-mail: Website: Revised Date: March 20, 2013 PL-2303HX (Rev D) Product Datasheet - 2 - Document Version Disclaimer All the information in this document is subject to change without prior notice. Prolific Technology Inc. does not make any representations or any warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial damage, including but not limited to special, incidental, consequential, or other damages.

2 Trademarks The Prolific logo is a registered trademark of Prolific Technology Inc. All brand names and product names used in this document are trademarks or registered trademarks of their respective holders. Copyrights Copyright 2005-2013 Prolific Technology Inc., All rights reserved. No part of this document may be reproduced or transmitted in any form by any means without the express written permission of Prolific Technology Inc. Revised Date: March 20, 2012 PL-2303HX (Rev D) Product Datasheet - 3 - Document Version Revision History Revision Description Date Added Android USB Host API Support March 20, 2013 Modify Features and OS Driver Support List Added QFN32 Reel Tape Information September 11, 2012 Modify Section Ordering Information Part Number June 25, 2012 Modify Reel Tape Packing (MOQ)

3 Information May 25, 2012 Added Windows 8 Driver Support Added OTPROM Configuration Section Modified BaudRate Support Table Added Reference Schematic Diagram Added Chip Marking Information Added Tube Packing Information Added Worldwide Distributors Information March 16, 2012 Added Windows 7 Logo Driver Information Modified Operating Temperature Characteristics Modified Baud Rate Settings Table September 9, 2010 Sec. : Modified DC & Temperature Characteristics June 27, 2008 Added Windows Vista and XP Logo Driver information Added USB-IF Logo TID information April 16, 2007 Sec. : Modified QFN diagram to add IC bottom PAD information June 30, 2006 PL-2303HX (Chip Rev D) Datasheet Formal Release November 23, 2005 Revised Date: March 20, 2013 PL-2303HX (Rev D) Product Datasheet - 4 - Document Version Table of Contents 7 Royalty-Free Driver Support.

4 8 Product Applications .. 8 FUNCTIONAL BLOCK DIAGRAM .. 9 INTRODUCTION .. 10 PIN ASSIGNMENT OUTLINE .. 11 SSOP28 Package .. 11 QFN32 12 PIN ASSIGNMENT & DESCRIPTION .. 13 SSOP28 Package .. 13 QFN32 14 OTPROM CONFIGURATION .. 15 DATA FORMATS & PROGRAMMABLE BAUD RATE GENERATOR .. 17 PL2303 HXD REFERENCE SCHEMATIC DIAGRAM .. 18 DC & TEMPERATURE CHARACTERISTICS .. 19 Absolute Maximum Ratings .. 19 DC Characteristics .. 19 Clock Characteristics .. 20 Temperature Characteristics .. 21 Leakage Current and Capacitance .. 21 Power-On Reset .. 21 OUTLINE DIAGRAM .. 22 SSOP28 Package .. 22 QFN32 Package.

5 23 PACKING INFORMATION .. 24 Carrier Tape (SSOP-28) .. 24 Carrier Tape (QFN32) .. 25 Reel Dimension .. 26 Tube Packing .. 27 Revised Date: March 20, 2012 PL-2303HX (Rev D) Product Datasheet - 5 - Document Version ORDERING AND CHIP MARKING INFORMATION .. 28 CONTACT INFORMATION .. 29 Revised Date: March 20, 2013 PL-2303HX (Rev D) Product Datasheet - 6 - Document Version List of Figures Figure 2-1 Block Diagram of PL-2303HX (Rev D) .. 9 Figure 4-1 Pin Assignment Outline of PL-2303HX (Rev D) SSOP28 .. 11 Figure 4-2 Pin Assignment Outline of PL-2303HX (Rev D) QFN32 .. 12 Figure 6-1 PL2303 EEPROM Writer Program.

6 15 Figure 8-1 PL2303HX (Chip Rev D) Reference Schematic Diagram .. 18 Figure 9-1 Power-On Reset 21 Figure 10-1 Outline Diagram of PL-2303HX (Rev D) SSOP28 .. 22 Figure 10-2 Outline Diagram of PL-2303HX (Rev D) QFN32 .. 23 Figure 11-1 SSOP28 Carrier Tape .. 24 Figure 11-2 IC Reel Placements .. 24 Figure 11-3 QFN32 Carrier Tape .. 25 Figure 11-4 Reel Dimension .. 26 Figure 11-5 Tube Packing Dimension .. 27 Figure 12-1 Chip Part Number Information (SSOP) .. 28 List of Tables Table 5-1 Pin Assignment & Description (SSOP28) .. 13 Table 5-2 Pin Assignment & Description (QFN32) .. 14 Table 6-1 EEPROM Writer Configuration .. 15 Table 7-1 Supported Data Formats.

7 17 Table 7-2 Baud Rate Settings (Supported by Driver) .. 17 Table 9-1 Absolute Maximum Ratings .. 19 Table 9-2a Operating Voltage and Suspend Current .. 19 Table 9-2b I/O Pins .. 19 Table 9-2c Serial I/O Pins .. 20 Table 9-2d Serial I/O Pins .. 20 Table 9-2e Serial I/O Pins .. 20 Table 9-3 Clock Characteristics .. 20 Table 9-4 Temperature Characteristics .. 21 Table 9-5 Leakage Current and Capacitance .. 21 Table 9-6 Power-On Reset .. 21 Table 10-1 Package Dimension .. 22 Table 11-1 Reel Part Number Information .. 26 Table 12-1 Ordering Information .. 28 Table 12-2 Chip Marking Information .. 28 Revised Date: March 20, 2012 PL-2303HX (Rev D) Product Datasheet - 7 - Document Version Features Single-chip USB to Serial ( rs232 / rs422 / rs485 ) asynchronous Serial data transfer interface Fully Compliant with USB Specification (Full-Speed) USB-IF Logo Compliant with TID 40000100 UHCI/OHCI ( ), EHCI (USB ), xHCI (USB ) Host Controller Compatible Integrated USB Transceiver and 5V to Regulator Integrated 96 MHz clock generator (No external crystal required) Integrated OTPROM (One-Time Programming ROM) no external EEPROM required.

8 O For writing and storing customer USB VID/PID, Serial Number, Product String, and other device startup configurations. (uses default settings if OTPROM is empty) Supports USB to rs232 Serial UART Interface o Full-duplex transmitter and receiver (TXD and RXD) o Six MODEM control pins (RTS, CTS, DTR, DSR, DCD, and RI) o 5, 6, 7 or 8 data bits o Odd, Even, Mark, Space, or None parity mode o One, one and a half, or two stop bits o Parity error, frame error, and Serial break detection o Programmable baud rate from 75 bps to 12M bps o External rs232 driver power down control o Independent power source for Serial interface Supports RS-422/RS-485 like Serial interface (TXD, DTR_N, and RTS_N pins should be externally pulled-up to 5V)

9 Extensive Flow Control Mechanism o Adjustable high/low watermark level o Automatic hardware flow control with CTS/RTS or DSR/DTR o Automatic software flow control with XON/XOFF o Inbound data buffer overflow detection Configurable 512-byte bi-directional data buffer o 256-byte outbound buffer and 256-byte inbound buffer; or o 128-byte outbound buffer and 384-byte inbound buffer Supports Remote Wake-up from rs232 input pin signals (RI, RXD, DSR, DCD, CTS) Four (4) General Purpose I/O (GP0, GP1, GP2, & GP3) pins and Four (4) Auxiliary General Purpose I/O (RI_N, DSR_N, DCD_N, & CTS_N) pins. Supports Windows Selective Suspend by OTPROM configuration (Enable Remote Wakeup) o Suspends power of chip when idle (COM port is closed) Provides royalty-free USB to Virtual COM Port drivers for Windows, Mac, Linux, Android -40oC to 85oC Operating Temperature Small footprint 28-pin SSOP or 32-pin QFN IC packages (RoHS compliant and Pb-free Green Compound Revised Date.)

10 March 20, 2013 PL-2303HX (Rev D) Product Datasheet - 8 - Document Version Royalty-Free Driver Support Windows 8, 7, Vista, XP, 2000 (Microsoft Certified WHQL Drivers) o Windows Update Driver installation available in Windows Vista, 7, and 8 (32/64-bit) o Download: Windows Server 2003, 2008, 2008 R2, 2012 Windows XP Embedded (XPe), Point-of-Service (WEPOS), and POSR eady Windows CE , , , and Windows Embedded Compact 7 o Requires customer SDK image file for customizing WinCE and drivers. Mac OS 8/9, OS X (supports latest Mac OS X Mountain Lion) o Download: Linux/Android kernel and above includes built-in drivers ( ) o Android requires root permission for accessing virtual Serial port (ttyusb) Android Java Driver Library (requires Android and above with USB Host or OTG) o No root permission needed o Download: o Android device must support USB Host API.