Plastic Modular Belt - uni-chains A/S

1 PTLPITCH INSTANDARDSTRAIGHT RUNNINGD atasheet: uni QNB CENP lastic Modular BeltCuni QNBS eriesTypeStraight running beltNominal pitch: mm ( in)Surface type: FlatSurface opening: ClosedBackflex radius: mm ( in)Pin diameter: mm ( in)Running directionmminmminP(Nominal) material & colorPOM-SLF BPP BPP W Pin material & color PP B PP W Non standard material and color: See uni Material and Color Overview. Alternative pin and lock materials: Solid Lockpin: D Pin: PP W B PE W PBT LG and SS304 Endlock: D Lockpin: PBT LG D N PP B W General belt tolerance is +0 at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request.*Max. Load per Drive Sprocket. belt material: POM-SLF 2300 N (517 lbf), PP 1300 N (292 lbf).**Max. Spacing between wear strips, Carry: mm ( in); Return: mm ( in). = Single LinkBelt widthPermissible tensile force( belt /pin material) belt weight( belt /pin material)*Min. No. drive sprocket per shaftNumber of wear strips (Min.)

2 No.)POM-SLF/PPPP/PPPOM-SLF/PPPP/PP**Carr y(pcs)**Return(pcs)mminNlbfNlbfkg/mlb/ft kg/ standard belt widths are available in steps of mm ( in). Additional non-standard belt widths are available in steps of mm ( in). standard belt widths are available in steps of mm ( in). Additional non-standard belt widths are available in steps of mm ( in). RibCurved RibFlat RibFlat RibDatasheet: uni QNB CRubber TopAccessoriesNon Standard material and color: See uni Material and Color Material & colorRubber Material & colorABCL inksizeWidthmminmminmminmminCurvedRibPP B03 K & colorHLink sizeWidthIndentmminmminmminNon StickPP-I B BNon Standard material and color: See uni Material and Color : uni QNB CNON STANDARD Tab Single Link OnlyAccessories Solid Lockpin as default lock system. Alternative pin materials & color: PBT LGNon Standard material and color: See uni Material and Color link material & colorRecommended pin material & colorABCDEFLink SizemminmminmminmminmminmminBottom GuidePOM-SLF directionmminA maxW - - : mm ( in)TypeMaterial & colorHH1H2mminmminmminPushPE ( belt width)Running directionuni QNB C/181008 BAOther sprocket sizes are available upon bores are always delivered with load per sprocket shown does not take bore size into also ensure that sufficient size shaft is chosen for corresponding bore sizes are available upon Retainer Rings: See uni Retainer Ring data of tooth = mm ( in)Width of OnePart sprocket = mm ( in)For correct sprocket position: See uni Assembly Instructions for uni QNB.

3 For more detailed sprocket information contact Customer information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating advice, quality solutionsand local service for all your belting BeltsSeamless BeltsModular BeltsTiming BeltsTransmission BeltsFabrication & serviceT +45 7572 3100F +45 7572 Beltech Modular A/SHjulmagervej 21DK-7100 VejleDatasheet: uni QNB CMoulded sprocketMoulded sprocketMoulded sprocketMoulded uni UltraFit TwoPart Sprocket(Narrow adapter)No. of teethBore sizeOverall diameterPitch diameterHub diameterDimension ADimensionBSingle row/Two wayMoulded PA6 LGPilot Z12 Z15 2 1 Z18 2 1 Z19 1 1 SprocketNo. of teethOverall diameterPitch diameterHub/adapter diameterHub/adapter widthDimension ADimension BSingle row/Two wayMoulded PA6 LGAdapter Moulded POM-D Moulded uni UltraFit TwoPart Sprocket(Wide adapter)uni UltraFit Two-Part Sprocket