Plate Bending, Sheet Metal Bending - Our …

1 Custom Rolling, Bending , Forming Steel - Since 1984 Toll Free: 877-754-0900 Plate Bending , Sheet Metal Bending Press Brake Plate Bending - Sheet Metal Bending Big bent plates on palettePlate BendingFormed Channels on forkliftAluminum Brackets Bent and PunchedThis is 3/8 aluminum flat bar that has been bent in three places and punched at each end to be used as a bracket. These brackets were bent using our 500 ton 18 foot press brake, which allows us to bend steel Plate up to thick by 10 feet long, and 3/8 thick Plate up to 18 feet long. Bending and Forming is our specialty here at Jorgenson Metal Rolling and Forming. We also specialize in structural steel rolling using most shapes such as beam rolling, angle rolling, pipe rolling and tube rolling. This is 5/8 thick Plate that has been bent to 90 degrees at multiple points.

2 At Jorgenson Metal Rolling and Forming we specialize in Bending Plate and rolling Plate , we also do angle rolling, tube rolling and pipe rolling. We also have a Custom Metal Fabrication department located in our facility, where we do shearing, punching and BendingPlate Bending and PunchingThick Bent Plate 500 tons Press Brake Plate Rolling, Bending , Forming Steel - Since 1984 Toll Free: 877-754-0900 Plate Bending , Sheet Metal Bending Press Brake Plate Bending - Sheet Metal Bending Bent and Punched Steel BracketsPlate BendingBent PlateThis is 3/8 thick Plate that is 10 feet long and has been bent to 90 degrees. At Jorgenson Metal Rolling and Forming Bending Plate as well as rolling Plate is just one of our many capabilities; our shop also has the ability to do Plate rolling up to thick and up to 10 feet in width.

3 We also specialize in angle rolling, channel rolling, beam rolling and pipe Steel Plate Formed Shapes Press BrakeThis is 1/2 thick Plate bent at multiple points, to various de-grees. At Jorgenson Metal Rolling and Forming Bending Plate , as well as Plate rolling, are just two of our many capabilities, we can also do Sheet Metal Bending , tube Bending and pipe Bending . We also have a Custom Metal Fabrication department located in our facility with capabilities such as shearing, punching and is 5/8 thick Plate that has been bent to 90 degrees at two points to form a saddle. This Plate was also punched in our cus-tom Metal fabrication department, which is located in our facil-ity. At Jorgenson Metal Rolling and Forming we can do heavy duty Plate Bending as well as rolling, our shop also has the ability to do Plate rolling up to thick and up to 10 feet in width.

4 This is 3/4 thick Plate that has been bent to 90 degrees. This Plate was also sheared to size and punched. Plate shearing and punching are a part of our full service custom Metal fabrication department, which is located in the facility. At Jorgenson Metal Rolling and Forming we can do heavy duty Plate Bending as well as rolling, our shop also has the ability to do Plate rolling up to thick and up to 10 feet in BendingPlate BendingBent Steel PlatesPlate Free: 877-754-0900 Custom Rolling, Bending , Forming Steel - Since 1984 Toll Free: 877-754-0900 Plate Bending , Sheet Metal Bending Press Brake Plate Bending - Sheet Metal Bending Formed Stainless Steel Plate BentPlate BendingThis is 1/4 thick Plate bent to various degrees. This Plate was also sheared to size in our custom Metal fabrication department, which is located in our facility.

5 At Jorgenson Metal Rolling and Forming Bending Plate as well as rolling Plate is just one of our many capabilities, we can also do Sheet Metal Bending , tube Bending and pipe