PLEXIGLAS 8N E - ledil.com

1 PLEXIGLAS 8 NPLEXIGLAS 8 NPLEXIGLAS 8 NPLEXIGLAS 8 NProduct InformationProduct Profile: PLEXIGLAS 8N is an amorphous thermoplastic molding compound (PMMA). Typical properties of PLEXIGLAS molding compounds are: good flow high mechanical strength, surface hardness and abrasion resistance high light transmission very good weather resistance free colorability due to crystal claritySpecial properties of PLEXIGLAS 8N are: optimum mechanical properties maximum heat deflection temperature good flow / melt viscosity AMECA :Used for injection molding optical and technical :optical waveguides, luminaire covers, automotive lighting, instrument cluster covers, optical lenses, displays.

2 PLEXIGLAS 8N can be processed on injection molding machines with 3-zone general purpose screws for engineering Form / Packaging: PLEXIGLAS molding compounds are supplied as pellets of uniform size, packaged in 25kg polyethylene bags or in 500kg boxes with PE lining; other packaging on R hm GmbH | PLEXIGLAS | Page 1/2 PLEXIGLAS 8 NPLEXIGLAS 8 NPLEXIGLAS 8 NPLEXIGLAS 8B2HB392< 982 - 3220 - 26060 - 90 StandardStandardStandardStandardISO 527 ISO 527 ISO 527 ISO 179/1eUISO 306 IEC 10006 ISO 75 ISO 75 ISO 11359 DIN 4102 IEC 707 ISO 1133 ISO 13468-2 ASTM D1003 ISO 489 ISO 1183 UnitUnitUnitUnitMPaMPa%kJ/m C C C CE-5 / K Classcm /10min% g/cm Ch C C ParameterParameterParameterParameter1 mm/min5 mm/min5 mm/min23 CB / 50 MPa0 - 50 C mmD65 d=3 mm 230 C / Tensile ModulusStress @ BreakStrain @ BreakCharpy Impact StrengthVicat Softening TemperatureGlass

3 Transition TemperatureTemp. of Deflection under LoadTemp. of Deflection under LoadCoeff. of Linear Therm. ExpansionFire RatingFlammability UL 94 Melt Volume Rate, MVRL uminous transmittanceHazeRefractive Index DensityPredrying TemperaturePredrying Time in Desiccant-Type DrierMelt TemperatureMold Temperature (Injection Molding)Mechanical PropertiesMechanical PropertiesMechanical PropertiesMechanical PropertiesThermal PropertiesThermal PropertiesThermal PropertiesThermal PropertiesRheological PropertiesRheological PropertiesRheological PropertiesRheological PropertiesOptical PropertiesOptical PropertiesOptical PropertiesOptical PropertiesOther PropertiesOther PropertiesOther PropertiesOther PropertiesRecommended Processing ConditionsRecommended Processing ConditionsRecommended Processing ConditionsRecommended Processing ConditionsAll listed technical data are typical values intended for your guidance.

4 They are given without obligation and do not constitute a materials :Properties:Properties:Properties:This information and all further technical advice is based on our present knowledge and experience. However, it implies no liability or other legal responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. In particular, no warranty, whether express or implied, or guarantee of product properties in the legal sense is intended or implied. We reserve the right to make any changes according to technological progress or further developments. The customer is not released from the obligation to conduct careful inspection and testing of incoming goods.

5 Performance of the product described herein should be verified by testing, which should be carried out only by qualified experts in the sole responsibility of a customer. Reference to trade names used by other companies is neither a recommendation, nor does it imply that similar products could not be Business Unit Performance Polymers of Evonik is a worldwide manufacturer of PMMA molding compounds sold under the PLEXIGLAS trademark on the European, Asian, African and Australian Continent and under the trademark ACRYLITE in the Americas. = registered trademarkPLEXIGLAS and PLEXIMID are registered trademarks of Evonik R hm GmbH, Darmstadt, GermanyRef.

6 No.: MC106-E v0160 Date: 2011-04-04 Evonik R hm GmbH Kirschenallee 64293 DarmstadtTelefon +49 6151 18-4711 Telefax +49 6151 18-3177