POLE LINE HARDWARE - Genuine Cable

1 5-1 hubbell power SystemsCHANCE CENTRALIA, MISSOURI MAY 2014 pole line HARDWARE5 Warranty - MaterialHubbell power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be free from defects in material and workman-ship. Buyer must notify the Company promptly of any claim under this warranty. The Buyer s exclusive remedy for breach of this warranty shall be the repair or replacement, factory, at the Company s option, of any product defective under the warranty which is returned to the Company within one year from the date of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR ARISING BY OPERATION OF LAW, COURSE OF DEALING, USAGE OF TRADE OR OTHERWISE IMPLIED, SHALL EXIST IN CONNECTION WITH THE COMPANY S PRODUCTS OR ANY SALE OR USE THEREOF.

2 The Company shall in no event be liable for any loss of profits or any consequential or special damages incurred by Buyer. The Company s warranty shall run only to the first Buyer of a product from the Company, from the Company s distributor, or from an original equipment manufacturer reselling the Company s product, and is non-assignable and non-transferable and shall be of no force and effect if asserted by any person other than such first Buyer. This warranty applies only to the use of the product as intended by Seller and does not cover any misapplica-tion or misuse of said - ApplicationHubbell power Systems, Inc. does not warrant the accuracy of and results from product or system performance recommendations resulting from any engineering analysis or study. This applies regardless of whether a charge is made for the recommendation, or if it is provided free of for selection of the proper product or application rests solely with the purchaser.

3 In the event of errors or inaccuracies determined to be caused by hubbell power Systems, Inc., its liability will be limited to the re-performance of any such analysis or study. Copyright 2011 hubbell Incorporated 210 North Allen Street Centralia, MO 65240 : Because hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without in USANOTICE: For latest revision of our Catalog and Literature, please visit our web site: CENTRALIA, MISSOURI MAY 2014 hubbell power SystemsNOTE:Where applicable, pole line HARDWARE manufactured by hubbell power Systems, Inc. is made from steel produced in ac-cordance with ASTM A575 and/or ASTM A576. Where galvanized, items are galvanized in accordance with ASTM appropriate, these pole line hard-ware items meet or exceed the following ANSI/NEMA to this Catalog Section 5 or call your hubbell representative for conformance of particular items to the above power SystemsCHANCE CENTRALIA, MISSOURI MAY 2014 ADAPTER, THIMBLEUsed to change 1-inch pin insulator thread to 13/8-inch pin insulator inchDimensions in inchOverallLength21/4 Approx.

4 ShipWeight, 100 4257 ARMS, Cable EXTENSIONFor suspending cables at a distance from the pole , a No. 7903 Cable Suspension Clamp is usually used under the arm (See page 5-21), attached through the center slot to a 5/8" machine bolt with a washer under the bolt head. Cable extension from the pole is 23" for No. 7920, 41" for No. 7921. Cable clamp with attachment bolt and pole mounting bolts, or lag screws, must be ordered separately. Hot dip in ShipWeight, 100 Angle Size3 x 21/2 x 1/431/2 x 21/2 x 5/16A-Size AnglesBC3/4" Dia. HolesBANDS, pole , ACCESSORIESFor use with No. 6276 and No. 6277 pole Bands (See next page). Deadend clevis has 13/16" hole to match rectangular holes in bands, and is attached with cone head bolt. Guy clips made in two pieces: top, 5/16" x 2 1/2" steel; bottom, 3/16" x 2 1/2" steel.

5 A 3/4" x 2 1/2" machine bolt with cotter pin fastens thimble. Guy clip also includes one No. 6280 conehead bolt which has square shoulder. Sheave can be used with C2030183 on page Guy Clip Cone Head Bolt Sheave for Guy ClipSteel SizeInches ASee above3/4 x 21 Ship Wt. 100 " 6278No. PS6280No. 79207 1/2" 5-4 CHANCE CENTRALIA, MISSOURI MAY 2014 hubbell power SystemsNo. 6277 BANDS, pole , ADJUSTABLEH eavy StyleThese are 3/16" x 4" flat steel bands, shipped assembled with one 3/4 x 4" curved bolt and one 3/4 x 21/2" cone head bolt. Hot dip galvanized. Extra cone head bolts, for attaching deadend clevises and guy clips, must be ordered separately. (See Accessories on page 5-3). One to eight attachments can be made from each pole band. CatalogNo. 6276 6277 Approx. Ship Per 100 Pieces 9501150 DescriptionBand, 6" - 10"Band, 8" - 14"BANDS, pole , ADJUSTABLEUse steel pole Bands on wood poles.

6 Take-offs for guy and insulation attachments can be made by using connecting links (see below). Bands are shipped Way, 90 4 Way, 90 4 Way, 90 " - 111/2"91/2" - 14"91/2" - 16"SizeStud3/4 x 6"3/4 x 6"3/4 x 8"SizeSteel1/4 x 4"1/4 x 4"1/4 x 4"4 Pcs. RUS ListedBANDS, pole , CONNECTING LINKSD esigned for use with 4-Way Adjustable pole Bands, above. For insula-tor or guy attachments. C2030183 has 11/4" diameter hole on one end and 15/16" holes on the other (Per Pair)C2030183 SteelSizeInches1/4 x 3 Length, Inches(Center Holeto Center Hole)71/2 Approx. Ship Wt. 100 Pieces 360 Cat. No.(CompleteAssembly)C2030194C2030197C20 30200 LagHoleSize9/16"9/16"9/16" Per100 " C2050140or C2050141 C20301872"1/4" thick15/16" " " No. C2030183 C2030141C2030140C2031088C20310875-5 hubbell power SystemsCHANCE CENTRALIA, MISSOURI MAY 2014 BANDS, pole , SECONDARY RACKFor attaching secondary racks to tubular metal poles.

7 Bands are equipped with 5/8" x 2" carriage bolts for attaching the racks, and 1/2" x 15/8" oval-shoulder clamp bolts for tightening bands on pole . Hot dip galvanized 1/4" x 11/2" steel. Made in two styles, the single type for at-taching one rack and the double type for two TypeDouble TypeNo. in Inches3/8-Inch Diameter *8645 864512 *8646 8647 5 51/26 7 Diameter333431 44 4 41/25 6 7 Dim. in Inches13/413/413/413/413/4 *8634 *863412 *8635 8636 8637 4,250 Pound Rated Tensile Strength*NEMA Standard RUS Listed7,800 Pound Rated Tensile SizeApprox. ShipWt. 100 PiecesDimensions in InchesBAYONETS, GROUND WIRE(Supports, Shield Wire)For supporting overhead ground wire on wood or steel poles. Bayonets have an 11/16" hole and an 11/16" pole -mounting slot to allow for inaccuracy in boring holes.

8 Holes at top of bayonet allow use of No. 5450 ground-wire clamps (Not included. See page 5-20). Bolts used to fasten corner bayonets together are included. pole -mounting bolts and ground-wire clamps are not included. Hot dip Bayonets36668454365466PS54841015202 x 2 x 1/421/2 x 21/2 x 1/43 x 3 x 1/4940220034305466 BOLTS, CARRIAGEC arriage Bolts have square nuts, finished points and rolled threads. Standard heads have square shoulders. Open-hearth steel. Hot dip PS6377 PS6378 Dim. in 65/875/885 PS6367 PS6368 Dim. in 65/875/885/8PS6376 Double TypePS6366 Single Type5-6 CHANCE CENTRALIA, MISSOURI MAY 2014 hubbell power SystemsBOLTS, CLEVISFor supporting crossarm suspension insulator strings. Cotter bolt is 23/4" long and comes with cotter pin and hex nut.

9 Clevis Bolts are drop-forged steel. Hot dip in InchesApprox. ShipWt. 100 15808 15810 15812 15814 15828 15830 15832 1583412,400 Pound Rated Tensile Strength RUS ListedCatalogNo. 19784 19786 19788 19790 19792 Approx. ShipWt. 100 EyeC (Inches)1416182022 BOLTS, DOUBLE-ARMINGFULL THREADB olts permit replacement ease in double arms and offer added flexibil-ity of use. Cone type point for easy starting and driving-out without damage to threads. Each bolt provided with four square nuts. Hot dip galvanized , DOUBLE-ARMING EYEB olts have a cone type point and are threaded to within 2" of the 11/2" x 2" eye. Three Square Nuts. Drop-forged steel. Hot dip DiameterLength,Inches18 6 81214161820222426No. 15828 BDEAI nsideDim. A1 1/21 1/21 1/21 1/21 1/2 OutsideDim. B2 5/82 5/82 5/82 5/82 5/8 ABNo.

10 8846C RUS Listed5/8" Bolt has 12,400 Pound Rated Tensile Strength3/4" Bolt has 18,350 Pound Rated Tensile StrengthE113/16113/16113/16113/16113/161 13/16113/16113/16D1/21/21/21/25/85/85/85 /8C13/1613/1613/1613/1613/1613/1613/1613 /16B5/85/85/85/83/43/43/43/4A 8101214 8101214C21 100 Pcs117126156176196204220240256268270280 Length,Inches161214161820222426283032 CatalogNo. 8846 *8862 *8864 *8866 *8868 *8870 *8872 *8874 8876 8877 8878 100 Pcs1251281502342402482722923163283651/2- Inch Shank Diameter5/8-Inch Diameter3/4-Inch Diameter12,400 Pound Rated Tensile Strength*ANSI Standard RUS ListedCatalogNo. 8848C2050140C2050141 *8882 *8884 *8886 *8888 *8890 *8892 *8894 889618,350 Pound Rated Tensile StrengthNOTE: For ALL sizes now available, see Supplemental Catalog Bulletin through dated December power SystemsCHANCE CENTRALIA, MISSOURI MAY 2014 BOLTS, MACHINEAre also called crossarm bolts or through bolts.