Transcription of Polycarbonate-ABS Blend (PC-ABS)
1 Tensile Strength, Type 1, Modulus, Type 1, Elongation, Type 1, Flexural Strength Flexural Modulus IZOD Impact, notched IZOD Impact, un-notchedASTM D638 ASTM D638 ASTM D638 ASTM D790 ASTMD790 ASTM D256 ASTM D256 5,040 psi265,000 psi % 8,600 psi270,000 psi ft-lb/in ft-lb/inMechanical Properties1 Test MethodImperial 2005 Stratasys, Inc. All rights reserved. Product specifications are subject to change without notice. MPPCABS 5/05 The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
2 End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, test conditions, etc. Actual values will vary with build conditions. 1 Build orientation is on side edge. 2Do to amorphous nature, material does not display a melting more information about Stratasys systems and materials, contact your representative +1 or visit true industrial thermoplastic, this Blend combines the most desirable properties of both materials; excellent featuresof ABS and the superior mechanical properties and heat resistance of polycarbonate. PC-ABS blends are widely usedin automotive, electronics and telecommunications applications.
3 When combined with the Fused Deposition Modeling(FDM) systems by Stratasys, this Blend is ideal for the rapid production of prototypes, tooling and the direct (tool-less)manufacturing of production TECHNOLOGY >MATERIALSP olycarbonate-ABS Blend (PC-ABS) MPa1,827 %50 MPa1,863 MPa123 J/a326 J/aMetricThermal propertiesTest MethodImperialMetricHeat Deflection (HDT), 264 psiHeat Deflection (HDT), 66 psiVicat SofteningCoefficient of Thermal ExpansionGlass Transition (Tg)Melt PointSpecific GravityDensityUL 94 Flame ClassRockwell HardnessDielectric S (kV/mm)Dielectric S (@100Hz)Dielectric C (@1 Mhz)ASTM D648 ASTM D648 ASTM D1525 DMA (SSYS )ASTM D792 ASTM D792UL94 ASTM D785 IEC 60112 IEC 60250 IEC 60250205 F230 F234 in/in F257 FNot lb/in^3HB C110 C112 C125 CNot gr/cm^3HB MethodValueAPPEARANCEzBlackSYSTEM AVAILABILITYzFDM Titan TIzFDM Vantage SEzFDM Vantage S Metric
