Example: biology

POLYLUB WH 2 - Atlanta Trading

POLYLUB WH 2. Multi-purpose food-grade grease Description Pack sizes POLYLUB WH 2. POLYLUB WH 2 is a mineral oil 400 g grease cartridge USDA H 2 authorised lithium soap based lubricating 1 kg can grease for general purpose food 25 kg bucket Good adhesion properties industry use. 180 kg drum Excellent low-temperature behaviour The grease offers good adhesion, Good water resistance excellent low-temperature properties and good corrosion protection. Good corrosion protection Can be applied via centrali- sed lubrication systems Application POLYLUB WH 2 is recommended for lubrication of all application points in the food processing and Product data related industries where contact with the food product is excluded.

POLYLUB WH 2 Multi-purpose food-grade grease Product information 5.508 e Edition 03.03 MA-LSL/CK/JM POLYLUB WH 2 • USDA H 2 authorised • Good adhesion properties

Tags:

  Polylub wh 2, Polylub

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of POLYLUB WH 2 - Atlanta Trading

1 POLYLUB WH 2. Multi-purpose food-grade grease Description Pack sizes POLYLUB WH 2. POLYLUB WH 2 is a mineral oil 400 g grease cartridge USDA H 2 authorised lithium soap based lubricating 1 kg can grease for general purpose food 25 kg bucket Good adhesion properties industry use. 180 kg drum Excellent low-temperature behaviour The grease offers good adhesion, Good water resistance excellent low-temperature properties and good corrosion protection. Good corrosion protection Can be applied via centrali- sed lubrication systems Application POLYLUB WH 2 is recommended for lubrication of all application points in the food processing and Product data related industries where contact with the food product is excluded.

2 Colour whitish Texture homogeneous POLYLUB WH 2 has a USDA H2. classification. Density, at 20 C, g/cm , approx. Drop point, DIN ISO 2176, C > 190. This multi-purpose grease has been designed for the lubrication of rolling Worked penetration at 25 C, 265 to 295. and plain bearings, slideways, cylin- DIN ISO 2137, mm der guides, rollers, cams, gears, Service temperature range, C * - 40 to 120. racks, filling and capping machines, washing machines, conveyors, wine Apparent dynamic viscosity, L/ M. presses as well as for tubular tracks Kl ber viscosity class**. and hooks in slaughter-houses. Base oil viscosity, DIN 51562, at 40 C, mm /s, approx. 225. Application notes at 100 C, mm /s, approx.

3 16. -1. POLYLUB WH 2 may be applied by Speed factor**, mm x min 300,000. means of brush, spatula or grease Flow pressure, DIN 51 805, at 40 C, mbar < 1400. gun. The product can also be used via Water resistance, DIN 51807, , 3 h/ 90 C 1 90. centralized lubrication systems. Corrosion protection, DIN 51802, Emcor test 0/1. (1 week, distilled water). Minimum shelf life * Service temperatures are guide values which depend on the lubricant's composition, the intended use and the application method. Lubricants change their consistency, apparent dynamic viscosity or viscosity depending on the mechano- The minimum shelf life is approxi- dynamical loads, time, pressure and temperature. These changes in product characteristics may affect the function of a mately 60 months if the product is ** Kl ber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S.

4 = heavy lubricating grease; ES = extra heavy lubricating grease stored in its original closed container ** Speed factors are guide values which depend on the type and size of the rolling bearing type and the local operating in a dry place. conditions, which is why they have to be confirmed in tests carried out by the user in each individual case. Product information e Edition MA-LSL/CK/JM. POLYLUB WH 2. Safety Data Sheet Product name: POLYLUB WH 2 9. Physical and chemical properties Code-No.: 096 023 Form paste Colour off-white Odour characteristic Drop point > 190 C, DIN ISO 2176. Kl ber Lubrication M nchen KG Emergency telephone no.: Flash point > 200 C (base oil). Geisenhausenerstra e 7 +49 89 7876-0 Ignition temperature not applicable 81379 M nchen, Germany Lower explosion limit not applicable ( +49 89 7876-0 telephone exchange Telefax +49 89 7876-333 Upper explosion limit not applicable Vapour pressure-first not applicable Density approx.)

5 G/cm3, 20 C. Water solubility insoluble 2. Composition / information on ingredients pH value not applicable Chemical characterization (preparation): Mineral oil, lithium soap Kinematic viscosity not applicable Further information none 3. Hazards identification No particular hazards known 10. Stability and reactivity Conditions to avoid: None Materials to avoid: Strong oxidizing agents 4. First aid measures Hazardous decomposition products: None under normal use After inhalation: Not applicable Additional information: None After contact with skin: Wash off with soap and plenty of water After contact with eyes: Rinse with plenty of water After ingestion: Do not induce vomiting. Obtain medical attention 11.

6 Toxicological information Advice to doctor: Treat symptomatically The toxicological data has been taken from products of similar composition Acute toxicity: LD50/oral/rat = > 2 g/kg (literature data). 5. Fire-fighting measures Chronic toxicity: None Suitable extinguishing media: Water spray, foam, dry powder, Human experience: Prolonged skin contact may cause skin irritation carbon dioxide (CO2) and/or dermatitis Unsuitable extinguishing media: High volume water jet Special Hazards: In case of fire the following can be released: Carbon monoxide, hydrocarbons 12. Ecological information Special protective equipment for firefighters: Standard procedure for Information on elimination (persistence and degradability): Product is chemical fires insoluble in water.

7 May be separated out mechanically in purification plants Additional information: Water mist may be used to cool closed containers. In the event of fire and/or explosion do not breathe fumes Behaviour in environmental compartments: Ecological injuries are not known or expected under normal use Ecotoxic effects: Aquatic toxicity is unlikely due to low solubility 6. Accidental release measures Additional information: Should not be released into the environment Personal precautions: Not required Environmental precautions: Do not flush into surface water or sanitary 13. Advice on Disposal sewer system Code of waste: 120 112. Wastes from shaping and surface treatment Methods for cleaning up / taking up: Use mechanical handling equip- ment.

8 Dispose of absorbed material in accordance with the regulations of metals and plastics; wastes from shaping (including forging, welding, pressing, drawing, turning, cutting and filling); spent waxes and fats Additional information: None Disposal: The code of waste has to correspond to the Council Directive 75/442/EEC and be specific as far as the related sector and process are concerned. Can be incinerated when in compliance with local, state and 7. Handling and storage federal regulations. Advice on safe handling: No special handling advice required Dispose of contaminated packaging and recommended cleaning: Offer Advice on protection against fire and explosion: No special precautions rinsed packaging material to local recycling facilities required Requirements on storage rooms and vessels: Store at room temperature in the original container 14.

9 Transport information Incompatible materials: Incompatible with oxidizing agents. Do not store GGVS / GGVE: not applicable together with food ADN / ADNR: not applicable Further information on storage conditions: None IMDG-Code: not applicable ICAO / IATA-DGR: not applicable Further information: Not classified as dangerous in the meaning of 8. Exposure controls / personal protection transport regulations Additional advice on system design: Not applicable Ingredients and specific control parameters: None 15. Regulatory information Respiratory protection: No special protective equipment required Labelling according to EU-guidelines: The product does not require a Hand protection: No special protective equipment required hazard warning label in accordance with EC-directives/German regula- Eye protection: No special protective equipment required tions on dangerous substances Body protection: No special protective equipment required National regulations Other protection measures: No special protective equipment required General protection and hygiene measures: Avoid prolonged and/or 16.

10 Other information repeated contact with skin. Remove soiled or soaked clothing Issue-department of Safety Data Sheet: immediately. Clean skin thoroughly after work; apply skin cream Chemical Documentation, ( +49 89 7876-564. The data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selected product. We recommend contacting our Technical Consulting Staff to discuss your specific application.)


Related search queries