Example: dental hygienist

Product Bulletin 1052 Actuator September 2017 Fisher 1052 ...

1052 size 70 diaphragm RotaryActuatorFisher 1052 size 70 spring return diaphragm rotaryactuators operate splined shaft rotary valves, such as8580, 8532, 8590, CV500, V500, and Vee Ballt(V150, V200 and V300) valves. 1052 actuators aresuitable for on off service or for throttling Actuator is designed for easy installation of abroad range of options: limit switches, positionindicating switches, positioners, and manualover rides. Option applicability varies with actuatorsize. Refer to the specifications table and table 4 forinformation concerning option applicability Application Flexibility-- 1052 rotary actuators areavailable with fail open or fail close constructionand can be mounted in any of four Actuator valvemounting positions. See figure 5 for mountingpositions. These actuators can be mounted on abroad range of Fisher valves or used with Minimal Dead Band-- Single joint linkage withsplined and clamped lever minimizes lost motionand improves control Long Service Life-- Rugged construction providesstability, corrosion resistance, and protection fromdeformation should over pressurization Fisher 1052 Actuator with Vee Ball Valve andFIELDVUE DVC6200 Digital Valve Controllern Safety-- The 1052 Actuator has an externallyaccessible spring adjuster to relieve springcompression (see figure 1).

www.Fisher.com Fisher™ 1052 Size 70 Diaphragm Rotary Actuator Fisher 1052 size 70 spring‐return diaphragm rotary actuators operate splined shaft rotary valves, such as 8580, 8532, 8590, CV500, V500, and Vee‐Ball

Tags:

  Size, Diaphragm, Rotary, Fisher, Actuator, Size 70 diaphragm rotary actuator fisher

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Product Bulletin 1052 Actuator September 2017 Fisher 1052 ...

1 1052 size 70 diaphragm RotaryActuatorFisher 1052 size 70 spring return diaphragm rotaryactuators operate splined shaft rotary valves, such as8580, 8532, 8590, CV500, V500, and Vee Ballt(V150, V200 and V300) valves. 1052 actuators aresuitable for on off service or for throttling Actuator is designed for easy installation of abroad range of options: limit switches, positionindicating switches, positioners, and manualover rides. Option applicability varies with actuatorsize. Refer to the specifications table and table 4 forinformation concerning option applicability Application Flexibility-- 1052 rotary actuators areavailable with fail open or fail close constructionand can be mounted in any of four Actuator valvemounting positions. See figure 5 for mountingpositions. These actuators can be mounted on abroad range of Fisher valves or used with Minimal Dead Band-- Single joint linkage withsplined and clamped lever minimizes lost motionand improves control Long Service Life-- Rugged construction providesstability, corrosion resistance, and protection fromdeformation should over pressurization Fisher 1052 Actuator with Vee Ball Valve andFIELDVUE DVC6200 Digital Valve Controllern Safety-- The 1052 Actuator has an externallyaccessible spring adjuster to relieve springcompression (see figure 1).

2 Actuator valve linkageis completely enclosed, yet the valve packingadjustment remains accessible without removingany parts (see figure 2).1052 ActuatorD104082X012 Product :1052 September 20171052 ActuatorD104082X012 Product :1052 September 2017 2 SpecificationsAvailable ConfigurationsFor on off service without a positioner or forthrottling services with or without a positionerDirect Acting: Increasing loading pressure extendsthe diaphragm rod out of the spring barrelActuator Sizes70 Standard diaphragm Pressure RangesJ0 to bar (0 to 33 psig), J0 to bar (0 to 40psig), and J0 to bar (0 to 55 psig)Maximum diaphragm Sizing Pressure(1) bar (55 psig)Maximum diaphragm Casing Pressure(5) bar (65 psig)Nominal Valve Shaft RotationJ90 degrees (standard), J60 degrees (optional), orJ75 degrees (optional)Valve Shaft Diameters, mm (Inches) (1 1/4), (1 1/2), (1 3/4), or (2)Maximum Breakout Torque(2)Up to 1370 NSm (12,100 lbfSin)Stroking TimeDependent on rotation, spring rate, initial springcompression, supply pressure, and size of supplypiping.

3 If stroking time is critical, consult yourEmerson sales office or Local Business PartnerDiaphragm Casing DisplacementSee table 1 Construction MaterialsSee table 3 Material Temperature Capabilities(1)Nitrile diaphragm or O Rings(3): -40 to 82_C (-40 to180_F)Silicone diaphragm : -40 to 149_C (-40 to 300_F)Travel IndicationGraduated scale and pointer combination located onactuator end of valve drive shaftPipe or Tubing Connection SizesStandard: 1/4 NPT internalOptional: J1/2 or J3/4 NPT internal, and J3/4 NPT Pipe Away vent openingMounting PositionsSee figure 5 Approximate WeightsSee table 2 OptionsOption applicability varies with Actuator size . Refer totable 4 and the Options Use this value to determine the maximum torque output. The pressure/temperature limits in this Bulletin and any applicable standard or code limitation for the Actuator should not Actual Actuator torque available depends on specific construction and casing pressure. For information on torque requirements of the valve being considered, contact your Emerson salesoffice or Local Business Partner3.

4 Nitrile O rings are used in the optional top mounted handwheel and in the optional up and down travel stop For higher temperature ratings, contact your Emerson sales office or Local Business This maximum casing pressure is not to be used for normal operating pressure. Its purpose is to allow for typical regulator supply settings and/or relief valve Mounted Handwheel: For infrequent use as amanual Actuator or for use as an adjustable up travelstop (see figure 4). For repeated or daily manualoperation, the unit should be equipped with adeclutchable handwheel Handwheel Actuator : A side mountedmanual Actuator can be used to provide on site controland to provide override capabilities. See :1078 (D101339X012) for handwheel Switches: Micro Switch or NAMCO switches forone or two single pole, double throw contacts. Seeseparate bulletins for limit switch Indicating Switch: TopWorx DXP M21 GNEB switch for one through six single pole, double throwswitch contacts are available.

5 See separate Bulletin forposition indicating switch ActuatorD104082X012 Product :1052 September 2017 3 Positioner: For precise positioning of the valve disk orball, the Actuator should be equipped with apositioner. Under some service conditions, the 1052actuator may be used successfully in theseapplications without a positioner. For additionalinformation, contact your Emerson sales office or LocalBusiness Partner with complete service Down Travel Stop: Used to limit theactuator stroke in the downward direction (see figure 3).Adjustable Up Travel Stop: Used to limit the actuatorstroke in the upward direction (see figure 3). Actuator Locking Mechanism: An Actuator lockingmechanism is available. It can be used to keep theactuator in a locked position (the same as thespring fail position) during maintenance. The padlockis customer supplied, and the mechanism requires amodified Actuator Away Vent: Some applications use natural gas orother hazardous gases as a supply pressure to theactuator.

6 These applications sometimes require theactuator housing to be vented, reducing theaccumulation of gases. For new constructions andretrofit kit information, contact your Emerson salesoffice or Local Business Partner with complete 1. diaphragm Casing DisplacementCASINGSIZECLEARANCEVOLUME(1) CASING VOLUME(2)60 DegreeRotation90 DegreeRotationcm3 Inches3cm3 Inches3cm3 Inches370349021313,92985019,02511611. Volume when the diaphragm is in the up Includes clearance 2. Approximate Actuator WeightsSIZE1052 ACTUATORTOP 1. Sectional Views of Spring Seat ConstructionDetailsW4742-2cropTYPICAL OF THE 1052 Actuator WITHADJUSTABLE SPRING SEATT able 3. Construction MaterialsPARTMATERIALA ctuatorActuator Housing and SpringBarrelCast ironDiaphragmNitrile on nylon or silicone onpolyesterDiaphragm HeadCast IronDiaphragm Casing(1)Pressed steelDiaphragm RodSteelHousing CoverCast iron or aluminumLeverDuctile ironOptional Top Mounted Handwheel AssemblyHandwheel and Handwheel BodyCast ironHandwheel StemBronzeO RingsNitrilePusher PlateCast iron or steelOptional Down Travel Stop AssemblyClosing CapBrassO ringNitrileStemStainless steelTravel Stop BodyCast ironOptional Up Travel Stop AssemblyClosing CapBrassO RingNitrileStemBronzeTravel Stop BodyCast iron1052 ActuatorD104082X012 Product :1052 September 2017 4 Figure 2.

7 Sectional Views Typical of 1052 ActuatorW3813 1W2291 3 Figure 3. Optional Adjustable Travel StopsTYPICAL ADJUSTABLE UP TRAVEL STOPTYPICAL ADJUSTABLE DOWN TRAVEL STOP28A1761 B36A6250 B1052 ActuatorD104082X012 Product :1052 September 2017 5 Table 4. Construction Features and Option ApplicabilityACTUATOR SIZEACTUATOR TYPESTANDARD TRAVELSTOPOPTIONAL TRAVEL STOPOPTIONALMANUALOVERRIDEACCESSORYSWITC HMOUNTINGS tyleStyleRange ofAdjustabilityMechanicallyOperatedSwitc hes701052 FixedTop mountedup travel stop ordown travel stop90 degreesTop mountedhandwheel forinfrequentoperation orside mountedmanual actuatorfor routineoperationExternallymounted, leveroperatedFigure 4. Top Mounted HandwheelW31451052 ActuatorD104082X012 Product :1052 September 2017 6 Table 5. Mounting Styles and PositionsMOUNTINGACTION(1)VALVE SERIES OR DESIGNVALVE SERIES OR DESIGNBALL/PLUGROTATIONTO CLOSEV250V150, V200 andV300CV500 andV500 DISK/BALLROTATIONTO CLOSEV2508532, 8560,8580, and8590 Right HandPDTCPDTOCCW(3)CCWABABABCWCWNANABALef t HandPDTCPDTOCCWCCWNANADCDCCWCWCDCDLeft Hand(Optional)(2)PDTCPDTOCW(4)CWNANACDNA NANANANANANANA1.

8 PDTC Push down to close, and PDTO Push down to A left hand ball will be required for NPS 3 through 12 V150, V200 and V300, Series B and NPS 14 through 20, with or without an CCW = counterclockwise4. CW = clockwiseFigure 5. Mounting Styles and Positions (also see table 5)Notes: Position 1 is standard; Positions 2 through 4 (shown in dotted lines) are DSTYLE CSTYLE BSTYLE ARIGHT HANDMOUNTING43A6505 AA1584 3 STYLE ASTYLE BSTYLE DSTYLE CFLOWFLOWRIGHT HAND MOUNTINGLEFT HAND MOUNTINGPOSITION 1 POSITION 1 POSITION 1 POSITION 1432432432432 LEFT HANDMOUNTING1111052 ActuatorD104082X012 Product :1052 September 2017 7 Figure 6. Dimensions (also see tables 6, 7 and 8)14A7222 F16A0600 BB1412 41052 size 70 ACTUATORC DIAPFYVHE1/2 14 NPTSIZE 7014A7222 FA2206 4 Actuator /VALVE BODYMOUNTING DIMENSIONSW DIATUJC DIAHCETOP MOUNTEDHANDWHEEL14A7221 DA30231/4 18 NPTI nstallationThe Actuator is normally positioned vertically in ahorizontal pipeline. Four mounting styles and fourpositions for each style are possible (see figure 5).

9 Dueto its weight, the 1052 size 70 Actuator must beexternally supported if mounted in the looking in the direction of flow in the pipeline,an Actuator is right hand mounted when it is on theright side of the pipeline, and an Actuator is left handmounted when it is mounted on the left side of Emerson Automation Solutions definition, forwardflow is into the face side of the disk or ball, and reverseflow is into the hub side of the disk or for both Actuator types are shown in figure6. These dimensions should be used in conjunctionwith the mounting positions shown in figure 5. Makeclearance considerations before mounting theactuator to determine the most suitable ActuatorD104082X012 Product :1052 September 2017 8 Figure 7. Actuator Locking MechanismA6019 2 ACTUATORLEVERMODIFIEDACTUATORHOUSINGPADL OCK(CUSTOMERSUPPLIED)LOCKINGMECHANISMA djustable Travel StopsAdjustable travel stops (in addition to those shown infigure 3) are available as discussed used here, down or downward means in a directiontoward the valve shaft and away from the piston adjustable down travel stop is installed in a specialactuator housing.

10 The assembly consists of a specialhousing, cap screw, locknut, lever, and rod endbearing. The cap screw can be positioned to limitdownward travel of the Actuator lever to any rotationbetween 0 and 90 locking mechanism shown in figure 7 is not to beused as a travel stop. Please specify an adjustabletravel stop assembly 6. DimensionsACTUATOR 7. Actuator / Valve Body Mounting DimensionsVALVE SHAFT 1/4 1 1 3/4 8. Dimensions for Top Mounted Automation Solutions Marshalltown, Iowa 50158 USAS orocaba, 18087 BrazilCernay 68700 FranceDubai, United Arab EmiratesSingapore 128461 contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are notto be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales aregoverned by our terms and conditions, which are available upon request.


Related search queries