Product Data Sheet: El-O-Matic E and P Series

1 El-O-Matic E and P Series Technical data pneumatic Rack and pinion actuatorsProduct Data Rev. JSeptember sheetCopyright Emerson Process Management. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest Valve Automation Center USA: +1 281 477 4100 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 No.: Date: January Rev. CTECHNICAL DETAILS, STANDARD ABABABE-SeriesED = Double acting ES = Spring ABABAB11 Adjustable range*91 Open* only standard on E- Series ABABABP-SeriesPD = Double actingPS = Spring returnACTUATOR :Double consumption at 1 atm ( )port ,068 SpecificationPressure range : Double acting 20 to 120 psi : Spring return 80 to 120 psi,, with max. spring set 40 to 120 psi, reduced spring quantity : 180 actuators 87 psi maximumTorque : 1133 to 40,000 at 80psi supply See torque data sheets and media : Air, dry or lubricated and inert gasses : For sub-zero applications take appropriate measuresTemperature : -4 to +176 FLubrication : Factory lubricated for the normal life of the actuatorConstruction : Suitable for indoor and outdoor installationFinish : Polyester non-TGIC based powder coating (see data sheet )Rotation : ( CW to 91 CCW)Double acting : Standard counter clockwise with port "A" pressurized (code A, see data sheet for other assembly codes)Spring return : Clockwise fail action (code A, see data sheet for other assembly codes)Limit stops : Standard on E- Series .

2 Adjustable range 91 /80 : Optional on P- Series . See data sheet : For double stroke adjustment. See data sheet DirectivesPED : All actuators are suitable for use with Group 2 gasses according to Pressure Equipment Directive 97/23/EC : Optional : actuators suitable for use with Group 1 gassesATEX : All basic actuators are suitable for use in hazardous area's classified II 2 GD, zones 1 or 2 (Gasses) and 21 or 22 (Dust)Russian ApprovalsEl-O-Matic E and P Series pneumatic actuators are available with the GOST-R and Rostechnadzor (RTN) Operating time is average with actuator under load and solenoid valve Air consumption is the actual free air volume at 1 Pressure is in sheetCopyright Emerson Process Management. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest Valve Automation Center USA: +1 281 477 4100 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 No.

3 : Date: January Rev. DEL-O-MATIC BASIC PNEUMATIC ACTUATOR CONfIgURATIONE/PSee following data sheets for more / / / / / 1 A 05 N 1 Single or Double action ES or PS = Single acting, ED or PD = Double actingActuator size E- Series 0012 = E120025 = E250040 = E400065 = E650100 = E1000150 = E1500200 = E2000350 = E 3500600 = E6000950 = E9501600 = E1600P-Series2500 = P25004000 = P4000 Valve flange Metric Metric UNC/NPTfinishISO 5211 DIN 3337 ISO 5211 M =D =U =StandardN =E =V =CSR coating (2 + Aluminum pinionO =f =W =CSR coating (2 + Stainless Steel pinion (3 Limit stops0 = No limit stops1 = L1 One way limit stops2 = Double Stroke AdjustmentStandard on P-SeriesStandard on E-SeriesStandard on DSA-SeriesAssembly codeCodeActionRotationMountingA =Spring to closeclock wisein line with pipelineB =Spring to closeclock wiseacross pipelineC =Spring to opencounter clock wiseacross pipelineD =Spring to opencounter clock wisein line with pipelineSpring set E- Series Spring set P-Series00 = Double acting actuator00 = Double acting actuator01 = Springset 104 =)))

4 Springset 404 = Springset 410 = Springset 1002 = Springset 205 = Springset 506 = Springset 612 = Springset 1203 = Springset 306 = Springset 608 = Springset 814 = Springset 14future expansionA = StandardDefault InsertSize (in mm.) (1E12E25E40E65E100E150E200E 350E600E950E1600P2500P4000- ISO or UNC00111414191922272736460000- DIN00111414171722222736460000 Visual Indication CodeD = DiskK = KnobN = No visual indicationTemperature range0 = StandardTS: 80 C (176 F)-20 C ( -4 F)1 = High tempTS: 120 C (248 F)-20 C ( -4 F)2 = Low tempTS: 80 C (176 F)-40 C (-40 F)(1 Actuators E12, P2500 and P4000 have no inserts. They have have a inner square the shaft 180 actuators are not covered by this configuration matrix.(2 CSR Coating not possible in combination with Double Stroke Adjustment limit stops (DSA Series ).(3 Stainless Steel pinion not possible in combination with Double Stroke Adjustment limit stops (DSA Series ).))))

5 Data sheetCopyright Emerson Process Management. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest Valve Automation Center USA: +1 281 477 4100 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 No.: Date: January Rev. BEL-O-MATIC ACTUATOR WITH ONE WAY LIMIT STOPS L1/LfDescriptionActuators with one way adjustable limit stops are used where the maximum opening (or closing) position of the valve needs to be reduced. For instance to adjust the maximum capacity of a remote operated valve. Also actuators with 180 rotation are available with these screws are fitted to both endcaps and the screw length is such that adjustment is possible through the specified rotation of the modified endcap is machined for to +93 rotation for all P- Series L1 is added to the basic part number PD2500-L1 Specification:Pressure : Up to 120 PSIM edia : Air, dry or lubricated or non-corrosive gasTorque (90 ) : Data sheet - (180 ) : Data sheet P- Series and dimensions : Data sheet A (90 ) : Data sheet A (180 )Temperature : to +176 FAdjustable range : 80 -93 (90 ) or 160 -186 (180 ) Adjustable position (see data sheet or ) code position A Valve open (spring to close) B Valve open (spring to close) C Valve closed (spring to open) D Valve closed (spring to open)Note.

6 1) Can be provided with extra long screws for full range adjustment (identification: PD2500-LF)2) This option in combination of a manual override gearbox is redundant inchACTUATOR 10 OpenAdjustable range 90 actuatorAdjustable range 180 actuator-20 +6 OpenClosedClosedNote: Do not adjust under pressureBACDDOUBLE ACTINgSPRINg " " " " sheetCopyright Emerson Process Management. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest Valve Automation Center USA: +1 281 477 4100 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 Rev. BLIMIT STOP PLATE DIMENSIONSLS 420 DescriptionThese limit stop plates are used when precise control is required for both end of stroke is possible to adjust 15 of both ends of the standard complete stop plate assembly may be added to the 90 P- Series assembly is normally sandwiched between the actuator and mounting surface of the valve or bracket.

7 Bearing rings are used at both surfaces to provide a long life unit is assembled with a drive adaptor which passes through the stop plate, into the square actuator and provides the coupling between the two drive adaptor normally also accommodates the coupling of the valve "LS420" is added to the basic part number PD2500-LS420 Other dimensionsSee data sheet for 180 or DIN-standard actuator+1 -15 + -15 range 90 actuatorsNote: Cover plate only in combination with P2500 Sheet No.: Date: June 2013+1 -15 + -15 shaftActuator baseDrive adaptorCover plateCamHousing limit inchesACTUATOR x "3/4-10 x "Data sheetCopyright Emerson Process Management. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website or from your nearest Valve Automation Center USA: +1 281 477 4100 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 Rev.

8 BSheet No.: Date: June 2013EL-O-MATIC ACTUATOR WITH DOUBLE STROKE typeE25E40E65E100E150E200E350E600E950E16 00A "-205/16"-185/16"-193/8"-163/8"-161/2"-1 31/2"-135/8"-115/8"-113/4" 10 3 15 adjustable rangeClosedstopscrew (1)Openstopscrew (2)Factory option: Fail to OpenYABCHIXJ1LL12D3 10 3 15 Stroke adjustment cam Factory option: "Fail open"DescriptionActuators with double stroke adjustment are normally used for high performance butterfly valves where a fine adjustment is required for the closed position. In this version adjustment is provided at the end of the opening and closing stroke positions. DSA actuators may be double acting or spring return, though are normally used as spring return (fail close) closed position is adjusted by means of the stop-screw (1) located in the actuator body and for the open position by the stop-screws (2) in the actuator end data sheet : Up to 120 psiOperating media : Air, dry or lubricated or non-corrosive gasTorque (90 ) : Data sheet - -- Spring return : Clock-wise on air Double acting : Counter clock-wise with port A dimensions : Data sheet : -4 to +176 FAdjustable range.

9 Closed position (1), -3 - 15 Open position (2), 80 - 93 Note1) Can be provided with extra long end-cap stop screws for full range adjustment of the open ) This DSA option is not required on actuators fitted with manual override gearboxes, as MO gearbox-es already incorporate this ) "Fail open" is factory ) When a standard Fail to Close actuator is re-assembled for Fail to Open operation (code D; see data sheet ), both stop-screws (1)and (2) will adjust the closed position. There is no adjustment for the open position!3) Vice versa: When a Fail to Open actuator is re-assembled for Fail to Close operation (code A; see data sheet ), both stop-screws (1) and (2) will adjust the open position. There is no adjustment for the closed position!Data sheetCopyright Emerson Process Management. The information in this document is subject to change without notice.

10 Updated data sheets can be obtained from our website or from your nearest Valve Automation Center USA: +1 281 477 4100 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 No.: Date: September Rev. FDIMENSION SHEET STANDARD ACTUATOR - ISOE/PNote1. Flange and square drive to ISO 52112. Top and solenoid flange to VDI/VDE 3845 (NAMUR)3. For P- Series actuators with limit stops see inchActuators E-seriesP-seriesE 12E 25E 40E 65E100E150E200E 350E600E950E1600P2500P4000A "1/4"-20 "1/4"-20 "1/4"-20 "5/16"-18 "5/16"-18 "5/16"-18 "3/8"-16 "3/8"-16 "3/4"-10 "3/4"-10 "3/4"-10 " "-20 "5/16"-18 "5/16"-18 "5/16"-18 "3/8"-16 "3/8"-16 "3/8"-16 "1/2"-13 "5/8"-11 "--"5/8""-11 " For E12 dimensions see data sheet KW1M1M2N VOWJAB P2 P1 EFGDCE2H KN P+ VOWSR VW1RR2T1U1R1S1 ABI V1 V1WM3 UNC P+ 5/8 -11x .98 5/8 -11x .98 Data sheetCopyright Emerson Process Management.