Product Description Sheet - Scott Technical Sales …

1 Product Description SheetRocky Hill, CT 06067-3910 Telephone: (860) 571-51001001 Trout Brook CrossingFAX: (860) 571-5465 NOT FOR Product SPECIFICATIONSTHE Technical DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE CONTACT LOCTITE CORPORATION QUALITY DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS ON SPECIFICATIONS FOR THIS HILL, CT FAX: +1 (860)-571-5473 DUBLIN, IRELAND FAX: +353-(1)-451 - 9959 Loctite and Hysol are Trademarks of Loctite Corporation USAH ysol Product 9340 Industrial Products, August 2001 DescriptionLoctite Hysol 9340 is a general purpose adhesive with exceptionalhigh temperature performance. This easy to use epoxy is can beused in many demanding applications where resistance to chemicalsand heat extremes are required.

2 Hysol 9340 can be used on manydifferent substrates such as wood, metal, ceramics, and mostplastics. This exceptional epoxy can be sanded and drilled andpainted after curing making it ideal for finish Heat ResistanceGood Tensile Sheer StrengthResistant to Automotive FluidsSandableEasy to MixTypical UncuredPropertiesPart APart BMixedPot Life @ 77 F, 100grams mins----90 ColorGreenGreyGreyViscosity, cPPastePastePasteSpecific Gravity------Mix Ratio By weight11-- By volume11--Typical PropertiesTypical ValueHardness, Shore D>80 Shear Strength, psi, ASTM D 1002 Etched AluminumCure ScheduleTest Temp oFTypical Value3 Days @ 77oF-4021007723001801850 GENERAL INFORMATIONThis Product is not recommended for use in pure oxygenand/or oxygen rich systems and should not be selected asa sealant for chlorine or other strong oxidizing safe handling information on this Product , consult theMaterial Safety Data Sheet , (MSDS).

3 HandlingMixing: Hysol 9340 requires mixing Part A and Part B together justprior to the application. Complete mixing of the two components : Combine Part A (resin) and Part B (hardener) in the correctratio and mix thoroughly. Continue to mix until all green and graystreaks are gone and mix is uniformly gray. This is important! Heatbuild-up during or after mixing is normal. Do not mix quantities greaterthan one pound as excessive exotherm or heat build-up will smaller quantities will minimize the heat : Bonding surfaces should be clean and dry. The bondedparts should be held in contact until the adhesive is set. It notnecessary to maintain fixturing for the entire cure schedule but onlyuntil handling strength is : Hysol 9340 can be cured by a variety of cure schedules tomeet processing requirements.

4 Hysol 9340 will achieve handlingstrength in 6-8 hours at room temperature (note: this can vary withdifferent bond configurations and ambient temperatures). Full curetime at 77oF is 24 hours. Heat cures can be used to shorten this instance, one hour at 180 oF or 2 hours at 140 oF is sufficient tofully cure the up: It is important to remove excess adhesive from the workarea and application equipment before it hardens. Many commonsolvents and citrus cleaners are suitable for removing uncuredadhesive. Consult with your solvent supplier for information pertainingto the safe and proper use of oz. Tube KitsQuart, One Gallon SystemsStorageStore Product in unopened container in a cool dry location.

5 Idealconditions are within the range 8 to 21 degrees C (46 to 70degrees F) and are recommended for long term to higher temperatures (greater than 28 degrees C)for prolonged periods should be avoided as extended exposureto warm conditions can adversely affect Product properties. Forfurther specific shelf life information, contact your local TechnicalService data contained herein are furnished for information only andare believed to be reliable. We cannot assume responsibility forthe results obtained by others over whose methods we have nocontrol. It is the user's responsibility to determine suitability forthe user's purpose of any production methods mentioned hereinand to adopt such precautions as may be advisable for theprotection of property and of persons against any hazards thatmay be involved in the handling and use thereof.

6 In light of theforegoing, Loctite Corporation specifically disclaims allwarranties expressed or implied, including warranties ofmerchantability or fitness for a particular purpose, arisingfrom sale or use of Loctite Corporation s products. LoctiteCorporation specifically disclaims any liability forconsequential or incidental damages of any kind, includinglost profits. The discussion herein of various processes orcompositions is not to be interpreted as representation that theyare free from domination of patents owned by others or as alicense under any Loctite Corporation patents that may coversuch processes or compositions. We recommend that eachprospective user test his proposed application before repetitiveuse, using this data as a guide.

7 This Product may be covered byone or more United States or foreign patents or patentapplications.