PRODUCT INFORMATION DuPont™ Zytel …

1 PRODUCT INFORMATIONDuPont Zytel 70G30 HSLR BK099 NYLON RESINP roduct InformationCommon features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperatureperformance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel nylon resins are available in different modified and reinforced grades tocreate a wide range of products with tailored properties for specific processes and end-uses.

2 Zytel nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option,incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction 70G30 HSLRBK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis resistant polyamide 66 resin for injection informationValueUnitTest StandardResin IdentificationPA66-GF30--Part Marking Code>PA66-GF30<-ISO 11469 Rheological propertiesdry / condUnitTest StandardMoulding shrinkage, / *%ISO 294-4, 2577 Moulding shrinkage.

3 / *%ISO 294-4, 2577 Mechanical propertiesdry / condUnitTest StandardTensile Modulus10000 / 7200 MPaISO 527-1/-2 Stress at break195 / 130 MPaISO 527-1/-2 Strain at break3 / 5%ISO 527-1/-2 Charpy impact strength, 23 C75 / 90kJ/m ISO 179/1eUCharpy notched impact strength, 23 C12 / 14kJ/m ISO 179/1eAIzod notched impact strength, 23 C12 / 14kJ/m ISO 180/1 AThermal propertiesdry / condUnitTest StandardMelting temperature, 10 C/min262 / * CISO 11357-1/-3 Temp. of deflection under load, MPa253 / * CISO 75-1/-2 RTI, electrical, / * CUL 746 BRTI, impact, CUL 746 BRTI, strength, CUL 746 BFlammabilitydry / condUnitTest StandardBurning Behav.

4 At nom. / *classIEC 60695-11-10 Thickness / *mmIEC 60695-11-10UL recognitionUL / *--Burning Behav. at thickness hHB / *classIEC 60695-11-10 Thickness / *mmIEC 60695-11-10 Electrical propertiesdry / condUnitTest StandardComparative tracking indexComparative tracking index400 / --IEC 60112 CTI, 23 C1 / -PLCUL 746 AOther propertiesdry / condUnitTest StandardDensity1370 / -kg/m ISO 1183 VDA PropertiesValueUnitTest StandardBurning rate, Thickness 1 mm24[1]mm/minISO 3795 (FMVSS 302)Odour4classVDA 2701: SE/B24 CharacteristicsInjection MouldingProcessingNorth AmericaEuropeAsia PacificSouth and Central AmericaNear East/AfricaGlobalRegional AvailabilityPage: 1 of 4 PDF Created: 2014-02-24 - Revised: 2004-07-30To find out more, visit DuPont Performance Polymers or contact nearest DuPont AmericaAsia PacificEurope/Middle East/AfricaTel: +1 302 999-4592 Toll-Free (USA): 800 441-0575 Tel: +81 3 5521 8600 Tel: +41 22 717 51 11 Copyright 2014 DuPont.

5 The DuPont Oval Logo is a trademark or registered trademark of du Pont de Nemours andCompany or its affiliates. All rights Zytel 70G30 HSLR BK099 NYLON RESIND iagramsDynamic Shear modulus-temperature (dry)Temperature in CShear modulus in MPa-500501001502002501E31E4G'Dynamic Tensile modulus-temperature (dry)Temperature in CDyn. Tensile modulus in MPatan dE" in MPa-500501001502002501E21E31E41E11E21E31 E-31E-21E-1 Dyn E TE"tan dChemical Media ResistanceAcidsPage: 2 of 4 PDF Created: 2014-02-24 - Revised: 2004-07-30To find out more, visit DuPont Performance Polymers or contact nearest DuPont AmericaAsia PacificEurope/Middle East/AfricaTel: +1 302 999-4592 Toll-Free (USA): 800 441-0575 Tel: +81 3 5521 8600 Tel: +41 22 717 51 11 Copyright 2014 DuPont.

6 The DuPont Oval Logo is a trademark or registered trademark of du Pont de Nemours andCompany or its affiliates. All rights Zytel 70G30 HSLR BK099 NYLON RESINA cetic Acid (5% by mass) (23 C)Citric Acid solution (10% by mass) (23 C)Lactic Acid (10% by mass) (23 C)Hydrochloric Acid (36% by mass) (23 C)Nitric Acid (40% by mass) (23 C)Sulfuric Acid (38% by mass) (23 C)Sulfuric Acid (5% by mass) (23 C)Chromic Acid solution (40% by mass) (23 C)BasesSodium Hydroxide solution (35% by mass) (23 C)Sodium Hydroxide solution (1% by mass) (23 C)Ammonium Hydroxide solution (10% by mass) (23 C)AlcoholsIsopropyl alcohol (23 C)Methanol (23 C)

7 Ethanol (23 C)Hydrocarbonsn-Hexane (23 C)Toluene (23 C)iso-Octane (23 C)KetonesAcetone (23 C)EthersDiethyl ether (23 C)Mineral oilsSAE 10W40 multigrade motor oil (23 C)SAE 10W40 multigrade motor oil (130 C)SAE 80/90 hypoid-gear oil (130 C)Insulating Oil (23 C)Motor oil OS206 304 , ISP (135 C)Automatic hypoid-gear oil Shell Donax TX (135 C)Hydraulic oil Pentosin CHF 202 (125 C)Standard FuelsISO 1817 Liquid 1 (60 C)ISO 1817 Liquid 2 (60 C)ISO 1817 Liquid 3 (60 C)ISO 1817 Liquid 4 (60 C)Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23 C)Standard fuel with alcohol (pref.)

8 ISO 1817 Liquid 4) (23 C)Page: 3 of 4 PDF Created: 2014-02-24 - Revised: 2004-07-30To find out more, visit DuPont Performance Polymers or contact nearest DuPont AmericaAsia PacificEurope/Middle East/AfricaTel: +1 302 999-4592 Toll-Free (USA): 800 441-0575 Tel: +81 3 5521 8600 Tel: +41 22 717 51 11 Copyright 2014 DuPont. The DuPont Oval Logo is a trademark or registered trademark of du Pont de Nemours andCompany or its affiliates. All rights Zytel 70G30 HSLR BK099 NYLON RESIND iesel fuel (pref. ISO 1817 Liquid F) (23 C)Diesel fuel (pref.

9 ISO 1817 Liquid F) (90 C)Diesel fuel (pref. ISO 1817 Liquid F) (>90 C)Salt solutionsSodium Chloride solution (10% by mass) (23 C)Sodium Hypochlorite solution (10% by mass) (23 C)Sodium Carbonate solution (20% by mass) (23 C)Sodium Carbonate solution (2% by mass) (23 C)Zinc Chloride solution (50% by mass) (23 C)OtherEthyl Acetate (23 C)Hydrogen peroxide (23 C)DOT No. 4 Brake fluid (130 C)DOT No. 4 Brake fluid (120 C)Ethylene Glycol (50% by mass) in water (108 C)1% nonylphenoxy-polyethyleneoxy ethanol in water (23 C)50% Oleic acid + 50% Olive Oil (23 C)Water (23 C)Water (90 C)Phenol solution (5% by mass) (23 C)Coolant Glysantin G48, 1:1 in water (125 C)Symbols used:possibly resistantDefined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions andexpected service life.

10 Criteria for assessment have to be indicated ( surface aspect, volume change, property change).not recommended - see explanationDefined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable ( fastcleaning with thorough rinsing, spills, wiping, vapor exposure).Contact DuPont for Material Safety Data Sheet, general guides and/or additional INFORMATION about ventilation, handling, purging, drying, Mechanical properties measured at (Hytrel measured at 2 mm), IEC Electrical properties measured at , all ASTM propertiesmeasured at , and test temperatures are 23 C unless otherwise INFORMATION set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls withinthe normal range of properties.