PROJECT NAME: 1 Neodymium CABLE SUSPENDED …

1 SPECIFICATION INFORMATIONDRIVER: [INTEGRAL]1) NON-DIMMING: As this fixture will not ) DIMMING: 0-10v: 1%, 10% :: Lutron: 2-wire Forward phase(Hi-Lume 1%), Ecosystem to 1% (Soft On), Ecosystem to 5% (5 Series). DALI - Specify driver. See Dimming Options on subsequent pages for more information. For other dimming options, consult the factory. 3) EMERGENCY: Specify EMB under the Options/Customization category at the end of the cut sheet along with the desired lumen output (600 or 1,000 lumens - the latter is slightly more costly).4) Drivers are programmed according to our standard lumen packages or to custom watt/lumen package ) Consult factory with any questions or specification NOTES:All fixtures are UL listed for dry and damp DRIVER for all contact the factory with any specification options may incur additional costs and/or extended lead times.

2 Please consult the :The standard finish is a Satin Clear anodized housing with Machine Finished hardware. Machined finish is preferable for machined components (Hardware Detail) - Powder coating these parts may result in additional costs. Consult the factory with any questions about standard or custom finishing :We have numerous custom options available. However, if there is something unique required for a PROJECT , from simple options to complete custom requests, we are more than willing to entertain any creative notions you might have. Just ORIENTATION:Bidirectional (CS) for downlight and uplight in the USAL umium Lighting, LLC | 3590 Cadillac Ave, Suite A, Costa Mesa, CA 92626 | Phone: | Fax: | we always strive to ensure all website content and product information is current, Lumium Lighting reserves the right to change specifications without notice.

3 0418 Lumium Lighting, LLC - All rights SPECIFICATIONNOTE: All options italicized may increase lead times and/or incur higher costs - please consult factory with *DETAIL FINISHCANOPY SIZEOPTIONS*HOUSINGFINISHSCSWMBCFS atin ClearAnodize(Standard)Satin White(Powder Coat)Matte Black(Powder Coat)Custom Finish*(Consult Factory)MFCFM achined Finish(Standard)Custom Finish(Consult Factory)SWCPCS atin White(Standard)Custom PowderCoat Canopy Finish*MFSWCFM achine Finish(Standard)Satin WhiteCustom Finish*5552505 Power feed canopy5 Non-power feed canopy5 Power feed canopy2 Non-power feed canopy5 Power feed canopyCanopy only at power feed4441404 Power feed canopy4 Non-power feed canopy4 Power feed canopy1 Non-power feed canopy4 Power feed canopyCanopy only at power feedCANOPYFINSHPOWER CORDCOLORAIRCRAFT CABLELENGTH*OPTIONS/CUSTOMIZATION*WGBCCW hiteGray BlackCustom Cord*XXEMB7 EMB1290 CCPCDCRNo EMB or Customization7 Watt battery back-up**(Approximately 600 lumens)12 Watt battery back-up**(Approximately 1,000 lumens)90+ CRI LED BOARDS (2700K - 4000K only)

4 Corners/patterns*Custom Driver*Customization Requested*2468CL_2 4 6 8 Custom Length**(Specify in feetIE: CL10 for 10 )NOTE: MF option is strongly recommended. Other options will result in higher costs and potentially longer lead times.* Hardware refers to the end caps and knuckles (knuckles only for the Rotational option).NOTE: Customization may incur higher costs and/or increased lead times.*Consult the factory for all custom options or custom concept requests. **The EMB12 is slightly more expensive than the EMB7 option (BOTH OPTIONS ARE INTEGRAL).*CONTINUOUS RUNS REQUIRE THE 55 OR THE 44 OPTION. CONSULT FACTORY WITH QUESTIONS.*See options section and installation instructions for more information.

5 *Consult the factory.*Cables are field adjustable.** Consult factory to confirm specific length.*RAL and color match are SERIES CANOPY4 SERIES CANOPY*Just about any finish is possible. For the 4 machined canopies, MF is strongly recommended. Contact the factory with questions or requests. FIXTURETYPEMOUNTING/ORIENTATIONNOMINALLE NGTH*COLORTEMPVOLTAGEDRIVERNd2 Neodymium 2Nd2 CSCable SUSPENDED LED DRIVE POWERINDIRECT*DIRECTVLOLOSOHOVHODHOCPOVe ry Low Output505 lumens/ft. (4w/ft.)Low Output750 lumens/ft. (6w/ft.)Standard Output985 lumens/ft. (8w/ft.)High Output1,210 lumens/ft. (10w/ft.)Very High Output1,465 lumens/ft. (12w/ft.)Dual High Output2,425 lumens/ft.

6 ( )Custom Power OutputConsult factoryVLOLOSOHOVHOCPOVery Low Output500 lumens/ft. (4w/ft.)Low Output740 lumens/ft. (6w/ft.)Standard Output975 lumens/ft. (8w/ft.)High Output1,200 lumens/ft. (10w/ft.)Very High Output1,425 lumens/ft. (12w/ft.)Custom Power OutputConsult factory*Not all dimming options are available with 2 3 4 5 6 7 8 12 CR__ 1 1-3/8 2 1-3/8 3 1-3/8 4 1-3/8 5 1-3/8 6 1-3/8 7 1-3/8 8 1-3/8 12 1-3/8 Continuous Run(Specify length innominal feet)*Dimensions are for reference only. Contact factory for more specific information or shop drawings.**Odd lengths may incur slightly higher per foot (120-277v)120v227v347v*NDNon-Dimming10D1 D10% DIM1% DIMDALID igital AddressableLighting InterfaceLT EALDE1 LDE5 Lutron Hi-Lume1% (2-Wire)Lutron EcoSystem1% Soft on (Digital)Lutron EcoSystem5% 5-Series (Digital)0-10v DIMMINGLUTRONDALIFEATURES.

7 3/64 aircraft CABLE suspension system High transmission frosted lenses with no diode imaging No visible fasteners Extruded aluminum housing Dimmable/Programmable drivers for controllable light output High efficacy LEDs with 5 year warranty Under 2 steps MacAdams Ellipse Binning 3/8 thick machined end caps 360 rotation option - with mechanical lockingPREMIUM LEDS WITH VARIOUS COLOR TEMPERATURES AND LIGHT OUTPUTEXTRUDED ALUMINUM HOUSINGINTEGRAL DRIVER (WITH ALL FIXTURE OPTIONS) MACHINED END CAPSSOFT GLOW FROSTED LENS2-1/2 2-1/2 CABLE SUSPENDED (CS) PROJECT NAME: TYPE:QTY:1 Neodymium2 SPECIFICATION INFORMATIONDRIVER: [INTEGRAL]1) NON-DIMMING: As this fixture will not ) DIMMING: 0-10v: 1%, 10% :: Lutron: 2-wire Forward phase(Hi-Lume 1%), Ecosystem to 1% (Soft On), Ecosystem to 5% (5 Series).

8 DALI - Specify driver. See Dimming Options on subsequent pages for more information. For other dimming options, consult the factory. 3) EMERGENCY: Specify EMB under the Options/Customization category at the end of the cut sheet along with the desired lumen output (600 or 1,000 lumens - the latter is slightly more costly).4) Drivers are programmed according to our standard lumen packages or to custom watt/lumen package ) Consult factory with any questions or specification NOTES:All fixtures are UL listed for dry and damp DRIVER for all contact the factory with any specification options may incur additional costs and/or extended lead times.

9 Please consult the :The standard finish is a Satin Clear anodized housing with Machine Finished hardware. Machined finish is preferable for machined components (Hardware Detail) - Powder coating these parts may result in additional costs. Consult the factory with any questions about standard or custom finishing :We have numerous custom options available. However, if there is something unique required for a PROJECT , from simple options to complete custom requests, we are more than willing to entertain any creative notions you might have. Just in the USAL umium Lighting, LLC | 3590 Cadillac Ave, Suite A, Costa Mesa, CA 92626 | Phone: | Fax: | we always strive to ensure all website content and product information is current, Lumium Lighting reserves the right to change specifications without notice.

10 0418 Lumium Lighting, LLC - All rights CFMachined Finish(Standard)Custom Finish(Consult Factory)PRODUCT SPECIFICATIONHARDWARE*DETAIL FINISHARMLENGTH*HOUSINGFINISHNOTE: All options italicized may increase lead times and/or incur higher costs - please consult factory with PLATEOPTIONS/CUSTOMIZATION*4 CPF CCPFlat 4 diameterCover Plate - For use with a 3-O mud ring Custom Cover Plate*3691218 CAL3 6 9 12 18 **Custom Length**(Specify in inchesIE: CL10 for 10 )NOTE: MF option is strongly recommended. Other options will result in higher costs and potentially longer lead times.