PROJECT REPORT - Chennai

1 PROJECT REPORT On Manufacturing of Pump Components Submitted As part of requirement of The Training under New Entrepreneur cum-Enterprise Development Scheme Government of Tamilnadu Conducted by Entrepreneurship Development Institute,Guindy, Chennai Prepared by Name : N. Santhosh Kumar Address: 7/22, Jeeva street, Urumandampalayam, GN Mills post, Coimbatore-29 Mobile: 7502384061 Training at Codissia, Coimbatore Financed by TIIC, Nanjappa Road, Coimbatore. PHOTO TABLE OF CONTENT Sl. No. Description 1. Executive summary 2. Business plan 3. Market survey 4. Machinery / equipment catalogue & invoice/quotations 5. Qualification and experience certificates 6. Part 1 registration under MSME EXCUTIVE SUMMARY INTRODUCTION: In today s market competition demand plays vital role. Even though many companies have formed year by year the competition goes higher but still there is demand for right product from customer s side.

2 In CNC machining works the customers demand is in terms of quality and delivery. As from my experience in the Engineering field for years I found it s the right business to do. To fulfill their requirement in terms of superior quality and delivery at right time is the ultimate aim of our business. In current scenario this aspect is very challenging. And there is huge scope in the Pumps Industries, Textile Machines Spares, Valves and Heavy Engineering market. ASK ENGINEERING is the company which comes across with plan to fulfill customer s needs and demand through development in ourselves, society and nation. This PROJECT aims at studying about detailed outline of a new business proposal. LAND AND BUILDING: The Unit is proposed to start the industry in the area of NANJEKOVENDENPUDUR in 1800 with 35 HP. PLANT AND MACHINERY: The following table refers the plant and machinery details, Description TYPE CAPACITY POWER Qty 1.

3 CNC TURNING CENTRE SUPPER JOBBER 200 MM CHUCK 15 KVA 2 2. CONSUL STABLIZER INDUSTRIAL 430 460 V 3 PHASE 1 3. AIR COMPRESSOR RECIPROCATING HP KW 1 MAN POWER: The following table refers the Manpower details TRANSPORT: Since the proposed unit is within the corporation limit of Coimbatore transport facilities are easily available. WATER: Water is required to mix with cutting oil for machining purpose. Purified RO drinking water should be purchased for drinking purposes. MATERIALS: The main materials used are Coolent oils, Cutting tools, Cotton wastes, Lubrication oils, Measuring Instruments, Jigs and fixtures are available in local market. SNO PARTICULARS QUANTITY 1 Machine Operators 4 3 Quality Inspectors 1 TOTAL 5 POLLUTION: Since the machines are computer based and pollution does not arise.

4 INTRODUCTION OF PROPRIETOR: Proprietor N. Santhosh Kumar is a (CA) graduate with hands on experience in industrial engineering for 4 years. Holds good expereince in business development, planning and execution, administration, marketing. Playing a key role in an organization managing, development & end-to-end operations. Having a good relationships amoung the companies around coimbatore. The better part of me is attitude, comprising of attributes like striving for excellence, quick learning, multi tasking, communication skills and above all a huge appetite for being the best. BIO DATA: EDUCATION (CA) SNS Rajalakashmi College of Arts and Science, Coimbatore. (Barathiar University) Year of Completion 2009 EXPERIENCE Operations and supervising Marks Engineering , Coimbatore Year of Experience 4 years LANGUAGE PROFICIENCY: Read : English and Tamil Write : English and Tamil Speak : English, Tamil.

5 PERSONAL DETAILS: Date of Birth : Marital Status : Single Phone : 7502384061 Permanent Address : 7/22, Jeeva street, Urumandampalayam, GN Mills post, Coimbatore-29. MATERIALS AND JOB ORDER PROVIDER: Texmo pumps and Aquapump, Coimbatore who are the leading manufacturers of pumps and motors products who are one of the major supplier to our country and worldwide. MARKET SURVEY ON DEMAND OF CNC TURNING CENTER BASIC QUESTIONS: 1. Do you think that there is a demand for the turning center in Coimbatore? A. Yes B. No. C. Moderate demand D. No idea. 2. What problem do you face often with the CNC job work?

6 A. Quality issues. B. Punctuality issues. C. Price issues. D. Other. 3. What is the main problem that has been faced by the CNC turning center nowadays? A. Power problem. B. Labor problem. C. Order problem. D. Payment problems. 4. Will there be a future demand for the CNC? A. Yes. B. No. C. Moderate. D. More demand. 5. Which CNC machine do you think it is economic and good in performance in India? A. Ace micromatic. B. Lakshmi. 6. Is there any difficulty in getting orders for CNC turning center nowadays? A. No. B. Yes. C. Very easy. D. Very difficult. 7. Are you receiving continuous orders for your machines? A. Yes B. No. C. Occasional orders. D. High orders. 8. Do you having capacity of resources to full fill their requirement? A. Low level C. Medium level. D. Higher level. 9. Is reference an important factor in receiving orders initially?

7 A. Yes. B. No. 10. What are the major expenditure you are spending for? A. Power. B. Labor. C. Tools and consumables. D. Rent. INTRODUCTION OVERVIEW: An important indicator of success for any business is the extent to which it has a high performing management team. This evaluation process is intended to know the current demand of the CNC turning center in Coimbatore at present time. The information has been gathered through surveys with the intension of knowing the CNC machine demand. At the same time the information has been gathered from the expert in the CNC and from the companies in Coimbatore. Using the overall average rating, we prepared a graph sheet below to know the feedback easily. I discussed around 10 companies in Coimbatore and gather information and prepared the graph sheet. As I approached these companies, some companies have refused and some gave the information which we cannot relay.

8 So we have not included those companies which have not co-operate with me. 1. Do you think that there is a demand for the turning center in Coimbatore? A. Yes B. No. C. Moderate demand D. No idea. When we ask that there is a demand for the CNC turning center in Coimbatore nowadays, out of 10, 7 companies answered yes, 2 companies answered Moderate demand and 1 company answered no. 2. What problem do you face often with the CNC job work? A. Quality issues. B. Punctuality issues. C. Price issues. D. Other. When I ask what problems that the company face often in CNC job work, out of 10, 4 companies answered Quality issues, 5 companies answered Price issues, and 1 company answered that the punctuality is their problem. 3. What is the main problem that has been faced by the CNC turning center nowadays? A. Power problem. B. Labor problem.

9 C. Order problem. D. Payment problems. When I ask the companies that what are all the problems that they are facing, 4 companies told that the power problem is the main problem that they are facing, 4 companies said labor is becoming scarce, 1 said rent has been his problem and 1 said payment problems. 4. Will there be a future demand for the CNC? A. Yes. B. No. C. Moderate. D. More demand. When I ask the companies that there is a demand for the CNC turning center in future, 4 companies said Yes, 1 company said No, 3 companies said Moderate, and 2 companies said more demand. 5. Which CNC turning machine do you think it is economic and good in performance in India? A. Ace Micromatic. B. Jothi. Lakshmi. C. Doosan. D. Hurco When I ask the companies about which CNC is the best in India for performance and economy, 6 companies said Ace Micromatic, 1 company said Jothi, 2 companies said Doosan, and 1 company said Hurco.

10 6. Is there any difficulty in getting orders for CNC turning center nowadays? A. No. B. Yes. C. Very easy. D. Very difficult. When I ask the companies that there is a difficulty getting Job order for CNC turning center, 4 companies said No, 1 company said Yes, 4 companies said very easy, and 1 companies said very difficult. 7. Are you receiving continuous orders for your machines? A. Yes B. No. C. Occasional orders. D. High orders. When I questioned the companies regarding the orders for their machinery 5 companies said Yes, 1 company said No, 2 companies said Occasional orders, and 2 companies said High orders. 8. Do you having capacity of resources to full fill their requirement? A. Low level C. Medium level. D. Higher level. When I ask the companies that they have the capacity to fulfill the requirement of their customer, 2 companies said they have low level, 5 companies said they have medium level and 3 companies have higher level.