PS-3025SH install V110TlGpLp Jan0802

1 installation Guide TABLE OF CONTENTS TABLE OF ..2 WHAT S INCLUDED ..2 BEFORE YOU GET ..2 installation POINTS TO SH FEATURES LIST ..3 HARNESS DESCRIPTION ..4 WIRING DIAGRAM ..6 TRANSMITTER FUNCTIONS ..7 LEARNING A TRANSMITTER ..7 THE PROGRAMMING ASSISTANCE BUTTON ..7 VALET get into Valet Mode:..7To get out of Valet Mode:..8 MULTI-SPEED TACH LEARNING ..8 PROGRAMMING OPTIONS ..82nd IGN / ACC / CRANK RELAY OUTPUT ..10 PROGRAMMABLE Pulse Duration ..10 Vehicle Type Gas or Diesel ..10 Horn START ..11 Idle activate the Idle Mode.

2 11 Cold Weather Door Locks ..11 Smart Ignition Locks ..11 Engine Running Rearm ..11 Secure Lock ..11 Smart Secure Sense ..12 Starter Disable ..12 Priority Door Access ..12 AUX 2 Timed Output ..13 Headlight Dome Light Chirp Timing ..14 AUX 3 TRUNK or Sunroof control ..14 TRUNK output with Disarm / Rearm pulse ..14 Programmable External Trigger ..14 HOME VALET ..15 GROUND OUTPUT ..15 PANIC MODE (in order to be available, this option must be programmed)..15 QUICK LOCKOUT ..15 MULTI-CAR OPERATION ..15 RESETTING THE LOGGING and Failure Codes via Parking Lights.

3 16 Events playback:..16 DIAGNOSTICS - PARKING LIGHTS ..17 TESTING ..17 CLOSING :DUE TO THE POTENTIAL FOR DAMAGE TO THE VEHICLE, THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY ELECTRICAL DAMAGE TO THE VEHICLE OR TO THE UNIT THAT HAS CAUSED VEHICLE DAMAGE DUE TO IMPROPER installation OF THE PRODUCT. THIS UNIT MUST BE INSTALLED BY A CERTIFIED POLARSTART TRAINED TECHNICIAN USING ALL SAFETY DEVICES review the installation Guide carefully before beginning any UNIT IS DESIGNED FOR VEHICLES WITH AN AUTOMATIC TRANSMISSION ONLY.

4 BEFORE INSTALLING THE UNIT, TEST THAT THE VEHICLE WILL NOT START IF THE GEAR SELECT LEVER IS IN DRIVE POSITION. IF IT STARTS IN GEAR, install A MANUAL TRANSMISSION CAR STARTER. Rev: TlGpLp Jan/08/02 Manufactured in Canada by POLARSTART POLARSTART PS-3025 SH Multi-Channel Remote Starter System for AUTOMATIC Transmissions2 INTRODUCTIONThe PS-3025 SH system is a state-of-the art remote car starter representing a breakthrough in vehicle convenience technology. Designed with OEM integration in mind, it can be customized and used in almost every possible application.

5 By integrating timed, latched and ON/OFF outputs, this unit can single-handedly control virtually any electrical system in your S INCLUDED Before beginning the installation , please review the installation guide particularly the installation schematic and the programming options. NOTE:It is very important that you familiarize yourself with the programming and operation of the PS-3025 SH system, even if you have already installed a Polarstart system in the past. There are many great new features that may be overlooked if the manual is not read: you would therefore not maximize the potential of the PS-3025 SH.

6 Prior to the installation , make sure that all the hardware components required to install the system are in the box. The following is a list of components included in the kit: x 1 - PS-3025 SH Control unit x 1 - Super-heterodyne Receiver x 1 - Plug-in push-button Valet Switch x 1 - Five-button multi-channel Transmitter x 1 - SH interconnect cable x 1 - Plug-in 2-volt LED x 1 - Hood Pin-switch The kit also includes the following: x 1 - 6-pin main Ignition Harness x 1 - 5-pin Secondary Harness x 1 - 2-pin Secondary Harness x 1 - 12-pin Accessories Harness x User Guide and installation Guide BEFORE YOU GET !

7 This unit is designed for vehicles with an AUTOMATIC TRANSMISSION ONLY! Before installing the unit, test that the vehicle will not start if the gear select lever is in Driveposition. If the vehicle starts in gear with the key, have the OEM neutral safety switch replaced before you install the car :If the vehicle ONLY starts in gear by jumping the starter wire, but NOT WITH THE KEY, then a neutral safety relay MUST be installed. FCC USER NOTICE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.

8 SUCH MODIFICATIONS COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT. installation POINTS TO REMEMBER x Always leave a window open when working on a NEVER leave the keys in the car. Leave them on a workbench! x If possible, remove the fuse of the courtesy light to prevent battery Inspect the vehicle for any body damage or electrical Make sure that all the switches and controls operate Verify whether the vehicle starts and idles Never install the control unit where it could interfere with normal operation or obstruct service Do not disconnect the Battery on vehicles equipped with air bags and anti-theft Always use a grommet when running wires into Engine compartment.

9 Never run wires through bare or sharp Always solder and tape all Never ground the Control Unit to the Steering Column of the Keep the Antenna away from other antenna types (GPS/Onstar)x Make sure that vehicles equipped with an automatic Transmission do not start while any one of the drive gears is selected. (If it starts in gear, please install a manual transmission starter.)3PS-3025 SH FEATURES LIST x LONG-RANGE SUPER-HETERODYNE RECEIVER x DRIVER S-DOOR PRIORITY ACCESS x HOME VALET MODE x PROGRAMMABLE HIGH-CURRENT 2ND OUTPUT FOR IGNITION / ACCESSORIES / STARTERx SAFE STARTx DOME LIGHT SUPERVISION* x DOME LIGHT-SMART IGNITION LOCK x PROGRAMMING BUTTON (Makes programming a snap!)

10 !) x INTELLIGENT FACTORY-ALARM CONTROL (Can arm virtually any factory alarm!!)x SECURE LOCK AND ARM x SMART SECURE LOCK AND ARM x SMART REARM (Will only rearm once)x MULTI-CHANNEL 5-BUTTON REMOTE TRANSMITTER x INDEPENDENT ARM / DISARM WIRES x PANIC MODE (HORN CONFIRMATION)x MULTI-CAR OPERATION (Can control 2 separate Polarstart-equipped cars) x REMOTE WINDOW OR SUNROOF CLOSURE CAPABILITY **x CONTROLLABLE LATCHED 30-SEC OR 60-SEC NEGATIVE OUTPUTx PLUG-IN PUSH-BUTTON VALET SWITCH AND DIAGNOSTICS VIA PARKING LIGHTS x DUAL 12-VOLT SUPPLY x NEGATIVE DOOR-LOCK OUTPUTS x IGNITION-CONTROLLED DOOR LOCKS x INTELLIGENT TACH WIRE LOCATOR (Tells you when you get the right Tach wire!