Example: tourism industry

PT-1930 Performer® Illustrated Parts Manual

Performer Illustrated Parts Manual Pumps and Dispensers PT-1930 Computer Programs All Gilbarco computer programs (including software on diskettes and within memory chips) are copyrighted by, and shall remain the property of, Gilbarco Inc. Such computer programs may also contain trade secret information. The duplication, disclosure, modification, or unauthorized use of computer programs is strictly prohibited, unless otherwise licensed by Gilbarco. FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to subpart J of part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction Manual , may cause harmful interference to radio communications.

PT-1930 Performer™ Illustrated Parts Manual • 9/95 Page 1 Introduction Introduction This illustrated parts manual contains information about parts

Tags:

  Manual, Part, Contains, Illustrated, Illustrated parts manual, Illustrated parts manual contains

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of PT-1930 Performer® Illustrated Parts Manual

1 Performer Illustrated Parts Manual Pumps and Dispensers PT-1930 Computer Programs All Gilbarco computer programs (including software on diskettes and within memory chips) are copyrighted by, and shall remain the property of, Gilbarco Inc. Such computer programs may also contain trade secret information. The duplication, disclosure, modification, or unauthorized use of computer programs is strictly prohibited, unless otherwise licensed by Gilbarco. FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to subpart J of part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction Manual , may cause harmful interference to radio communications.

2 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate this equipment. Approvals Underwriters Laboratories: Gilbarco pumps and dispensers that bear the listing mark are listed under the file number MH1941. Weights and Measures: Gilbarco pumps and dispensers are evaluated by the National Institute of Standards and Technology (NIST) under the National Type Evaluation Program (NTEP). NIST has issued Certificates of Compliance (COC) for the following: California Air Resources Board (CARB): The Gilbarco approval for The Advantage motor fuel dispensers is on attachment A. New York City: The Advantage Series: NYFD C.

3 Of A. # Series: NYFD C. of A. #4879. National Quality Assurance: Gilbarco is an ISO9001/BS5750 part 1/EN29001 registered company, certificate number 5119. Permissions Gilbarco has been given permission by OPW and ASCO to use their illustrations. Patents Gilbarco products are manufactured or sold under one or more of the following ,814,9344,566,5044,687,0334,728,7884,799 ,9404,876,6534,890,2104,913,8134,936,445 4,938,2514,939,7304,986,4455,013,4345,02 9,1005,040,5775,083,8465,098,1795,099,40 35,110,0105,134,5485,156,1995,228,0845,2 69,3535,325,7065,345,9795,355, , , ,471 Additional and foreign patents pending. Trademarks The following are trademarks of Gilbarco Inc.:The Advantage MPD Proportional Flow Control Valve Super-Hi VaporVac G-SITE MPD Pro Blender Salesmaker Trimline *CRIND Highline MPD Precision Blender Salesmaker Pro Blender Ultra-Hi InfoScreen Transac Dimension Super-Hi Legacy This document is subject to change without notice.

4 For information regarding Gilbarco Literature, call #The Advantage Series90-115-A4 MPD-3 Series: AE, AL, AP, AU87-077A2 MPD-2 Series: AK87-077A2 MPD-1 Series: AF, AG, AN, AR89-019A1H111B Series: AC88-226A3 ModelCOC #Salesmaker ProBlender: AB78-099 Salesmaker Series: AM88-129 Trimline Series91-088 Dimension Series93-081A1 Legacy Series94-027 SystemExecutive Order #Balance Vapor RecoveryG-70-52 SystemExecutive Order VaporVacG-70-150-AB BS5750 part 1/EN29001 Certificate No. 5119 PT-1930 Performer Illustrated Parts Manual 9/95 Page 1 Introduction Introduction This Illustrated Parts Manual contains information about Parts for Gilbarco s Performer of Pumps and Dispensers. How to Use Your Manual The Manual is divided into the following sections: Model Number Breakdown Models Available Frame and Sheathing Hydraulics Area Table Setup The tables in your Manual are setup as follows: #PartDescriptionCurrent part NumberPrevious part Unit Performer DieselPRICE PER LITERLITERSTHIS SALEDual Unit Performer ExtraRegularPRICE PER LITERLITERSTHIS SALEPRICE PER LITERLITERSTHIS SALE# (Item Number)Callout on illustration or number in DescriptionDescription of part NumberPart is in current production at part NumberSuperseded by the current part (Quantity)How many of that part is needed for : as req.

5 Means as required Introduction Page 2PT-1930 Performer Illustrated Parts Manual 9/95 When ordering Parts : 1 Please furnish model number, date code and original options. These are stamped on a plate riveted to the center of the main frame base. 2 Provide the following information: Quantity needed part Number Description of part Color and graphics and other information needed for order entry items. Date Codes The two letter Date Code is stamped on the serial plate before the serial number. This code states the month and year of manufacture. Please use this chart for reference when determining date codes. Related Documents For part number changes and boards that can be used as spares, use PT-1867, Modular Electronics Board Guide. Month Codes A = JanuaryE = MayJ = SeptemberB = FebruaryF = JuneK = OctoberC = MarchG = JulyL = NovemberD = AprilH = AugustM = December Year Code B = 1993E = 1996H = 1999C = 1994F = 1997J = 2000D = 1995G = 1998 MFG.

6 BY GILBARCO, INC. GREENSBORO, Underwriters Labortories Inc. ListedPower Operated Dispensing Device For Flammable LiquidsNo. HSerial No. Model Preset Cash/Credit PPP E/M/Totalizers Rotated Putdowns Spring Retriever Flexmast Mount VDI For use with equipment specified in installation C. of A. #4805JE1200 Performer PT-1930 Performer Illustrated Parts Manual 9/95 Page 3 Model Number Breakdown Model Number Breakdown Performer The following models are available. Model NumberDescription JE1000 Pump, 1-Grade,1-Hose, Standard FlowJE1100 Pump, 1-Grade,2-Hose, Standard FlowJE1200 Pump, 2-Grade,2-Hose, Standard FlowJEA000 Dispenser, 1-Grade,1-Hose, Standard FlowJEA100 Dispenser, 1-Grade,2-Hose, Standard FlowJEA200 Dispenser, 2-Grade,2-Hose, Standard FlowJE1300 Pump, 1-Grade,1-Hose, High FlowJE1500 Pump, 2-Grade,2-Hose, High FlowJEA300 Dispenser, 1-Grade,1-Hose, High FlowJEA400 Dispenser, 1-Grade,2-Hose, High FlowJEA500 Dispenser, 2-Grade,2-Hose, High Flow Performer Electronics Page 4PT-1930 Performer Illustrated Parts Manual 9/95 Performer Electronics Plate 1 CD (Computer Display) Module (W03565-G1)12345678910(See Plate 3)

7 11121314161517 PT-1930 Performer Illustrated Parts Manual 9/95 Page 5 Performer Electronics #PartDescriptionCurrent part NumberPrevious part NumberQty. 1 Keypad overlayT17855-XX-1/ side2 Gasket, Customer Programmable PresetR19509-01-1/side3 Customer Programmable Preset FaceplateR20266-G1-1/side4 PCB Pump Preset Display AssemblyT17328-G1-1/side5 Top Cover Assembly (Low) 1 W03552-XX-16 Display Window BracketT19655-01-as Window DisplayN23688-01-as Window GasketN23692-01-49 Cross BraceR20263-01-310 Motor Control Assembly (3 phase) See Plate 3T19673-XX-111 Computer Display (CD) Side Support AssemblyW03567-G1-212 Conduit (See Plate 7)13 Conduit Washer 3/4N16599-92-as Nut 3/4K93487-as Main Display cm. ( )T17701-G1-as Main Display cm (1 )T17962-G1-as LCD assemblyT17622-G6-as LCD assembly (.6 reflector)T17622-G9-as LCD assembly (.)

8 7 reflector)T17622-G5-as Mask cm ( )T19635-01-as Mask cm (1 )T19636-01-as req. Performer Electronics Page 6PT-1930 Performer Illustrated Parts Manual 9/95 Plate 2 CD Module Components119181716155476321413121110982 0 PT-1930 Performer Illustrated Parts Manual 9/95 Page 7 Performer Electronics#PartDescriptionCurrent part NumberPrevious part NumberQty. 1 Customer Programmable Preset BoardT17331-G3-as Board Cover Barrier BoardT19301-G1-14CD Lower Support AssemblyW03566-01-15CD Module BaseW03565-G1-16 Conduit Washer 3/4N16599-92-27 Conduit Nut 3/4K93487-28 Lock and Key AssemblyQ12928-02-19 KeyK89699-07110 Operator Keypad Bracket AssemblyT19678-G1-111 Operator Keypad Bracket GasketN23701-01-112 Voltage Select Plug 115 VACN21120-G6-1220 VACN21120-G8-1230 VACN21120-G9-1240 VACN21120-G10-113 Fuse, F1 (3 Amp, 250 VAC, Slo-Blo) Q10131-03-114 Fuse Holder Q11781-01-115 Transformer 115/220-240 VAC 50/60 Hz with BacklightsQ12939-02Q12939-01-116 EMI Filter 6 Pad PCB SpacerN23702-02-218 Foam Pad PCB SpacerN23702-01-119 Hydraulics Interface BoardT18994-G1-120 Pump Controller BoardT18904-G2-121 Manager keypad (not shown)

9 T17549-G1-1 Performer Electronics Page 8PT-1930 Performer Illustrated Parts Manual 9/95 Plate 3 Motor Control Assembly #PartDescriptionCurrent part NumberPrevious part NumberQty. 1 Shield Cover AssemblyT19676-G1-12 Surge Suppressor AssemblyN23214-G1-as Contractor (3 phase)R19406-03-as Overload (3 phase)R19406-02-as Screws 6-32 x 3/4Q12083-18-as AssemblyT19672-G1-17 Cable Assembly (dual)T18551-G3-1 Cable Assembly (single)T18551-G4-18 Cable Assembly (low voltage)R19733-G2-19 Bushing, snap S K85071-15-110 Motor Control AssemblyT19673-xx-1786549321 PT-1930 Performer Illustrated Parts Manual 9/95 Page 9 Performer Electronics Plate 4 Electronic Cables #PartDescriptionAssociatedPlugs and JacksCurrent part NumberPrevious part NumberQty. 1 Logic/Main Display (1 )A1, B1, J204-A2, B2T19571-G1-12 Logic/Main Display (.)

10 6 )J801, J204T17768-G1-13 BacklightP302, J802A/B/C/D, WT1/2T17766-G3-14 Controller/InterfaceJ205, J305R19952-G1-15 Controller/InterfaceJ206, J306R19939-G1-16 Controller/interfaceJ207,J203,J901,J307R 19951-G1-27 Main DC Cable AssemblyJ405, J115, J407T19675-G1-1824 Volt Cable AssemblyJ308, T1R20234-G1-19 Two-Wire Cable AssemblyJ208, P402R20235-G1-110 Power Supply CableJ605, J604T19572-G1-111 Filter to FuseF1-2, FL1-3R15634-G59-112 Line Filter to GroundFL1-5, E1R15634-G114-113 Pulser ConduitJ111A, J113, J27B, PHB, PHA, J27AT19573-G1-114 Main ConduitJ309, P604, J402T19638-G1-115 Main Conduit, 3-phaseJ309, P604, ,P406, J402T19638-G2-116 PPP to ControllerJ201, J411R20231-G1-117 PPP to DisplayJ412, J612R20232-G1-218 Five-Button Preset to ControllerP130A/B, J202T19048-G2-119 Pump Stop/R19527J131A/B, J802T19336-G4-120 Controller/T19336J204, P802, P204AR19527-G1-121DC Cable, (three-phase cables)P407R19733-G2-122AC Cable (dual), (three-phase cables)J406, K2-T1, K2-T2, K2-T3, K1-T1, K1-T2, K1-T3, K2-L3, K2-L2, K2-L1, K1-L3, K1-L2, K1-L1T18551-G3-123AC Cable (single), (three-phase cables)J406, K1-T1, K1-T2, K1-T3, K1-L3, K1-L2, K1-L1T18551-G4-1 Frame and Sheathing Page 10PT-1930 Performer Illustrated Parts Manual 9/95 Frame and Sheathing Plate 5 Frame and Sheathing51513121110987643211614 PT-1930 Performer Illustrated Parts Manual 9/95 Page 11 Frame and Sheathing 1 Order Entry, Customer specific item please specify color and graphics when ordering.


Related search queries