Example: bachelor of science

PULSACOIL ECO STAINLESS - gledhill.net

ONE NAME. EVERY ECO STAINLESSTHERMAL STORE SPECIFICALLY DESIGNED FOR APARTMENTSINSTRUCTION MANUALDESIGN, INSTALLATION & SERVICINGPage 2 section PageDESIGN Introduction 3 Technical Data 5 System Details 9 INSTALLATION Site Requirements 14 Installation 15 Commissioning 20 Installation Review 21 SERVICING Annual Service 22 Changing Components 22 Short Parts List 23 Fault Finding 24 ADDENDIX Addendix A 30 Addendix B 31 Addendix C 32 Notes 33 Terms & Conditions 34 BENCHMARK Commissioning Checklist 36 Service Record 37 ISSUE 4.

Page 2 Section Page DESIGN Introduction 3 Technical Data 5 System Details 9 INSTALLATION Site Requirements 14 Installation 15

Tags:

  Section

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of PULSACOIL ECO STAINLESS - gledhill.net

1 ONE NAME. EVERY ECO STAINLESSTHERMAL STORE SPECIFICALLY DESIGNED FOR APARTMENTSINSTRUCTION MANUALDESIGN, INSTALLATION & SERVICINGPage 2 section PageDESIGN Introduction 3 Technical Data 5 System Details 9 INSTALLATION Site Requirements 14 Installation 15 Commissioning 20 Installation Review 21 SERVICING Annual Service 22 Changing Components 22 Short Parts List 23 Fault Finding 24 ADDENDIX Addendix A 30 Addendix B 31 Addendix C 32 Notes 33 Terms & Conditions 34 BENCHMARK Commissioning Checklist 36 Service Record 37 ISSUE 4.

2 DECEMBER 2017 The Gledhill PULSACOIL ECO range is a WBS listed product and complies with the HWA Specification for hot water only thermal storage products. The principle was developed in conjunction with British Gas. This product is manufactured under an ISO 9001:2008 Quality System audited by s first priority is to give a high quality service to our is built into every Gledhill product and we hope you get satisfactory service from Gledhill. If not please let us places responsibilities on both manufacturers and installers. The purpose is to ensure that customers are provided with the correct equipment for their needs, that it is installed, commissioned and serviced in accordance with the manufacturers instructions by competent persons and that it meets the requirements of the appropriate Building Regulations.

3 The Benchmark Checklist can be used to demonstrate compliance with Building Regulations and should be provided to the customer for future are required to carry out installation, commissioning and servicing work in accordance with the Benchmark Code of Practice which is available from the Heating and Hot Water Industry Council who manage and promote the Scheme. Visit for more further information on the HWA Charter Membership, please refer to the HWA website 3 DESIGNINTRODUCTIONAny water distribution system/installation must comply with the relevant recommendations of the current version of the Regulations and British Standards listed below:-Building RegulationsRequirements for Electrical InstallationsWater RegulationsManual Handling Operations RegulationsBritish StandardsBS EN 806:1-5: BS EN 8558.

4 2011 The Building Regulations (England & Wales) require that the installation of a heating appliance be notified to the relevant Local Authority Building Control Department. From 1st April 2005 this can be achieved via a Competent Person Self Certification Scheme as an option to notifying the Local Authority directly. Similar arrangements will follow for Scotland and will apply in Northern Ireland from 1st January suitably competent trades person must install the PULSACOIL ECO and carry out any subsequent maintenance/repairs. In fact the appliance front cover is secured by 2 screws and this should only be removed by a competent trades person.

5 The manufacturer s notes must not be taken as overriding statutory obligations. The PULSACOIL ECO STAINLESS is not covered by section G3 of the current Building Regulations and is therefore only notifiable to Building Control as part of the domestic water PULSACOIL ECO STAINLESS is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their should be supervised to ensure that they do not play with the information in this manual is provided to assist generally in the selection of equipment.

6 The responsibility for the selection and specification of the equipment must however remain that of the customer and any Designers or Consultants concerned with the design and Note: We do not therefore accept any responsibility for matters of design, selection or specification or for the effectiveness of an installation containing one of our products unless we have been specifically requested to do goods are sold subject to our Conditions of Sale, which are set out at the rear of this the interest of continuously improving the PULSACOIL ECO range, Gledhill Building Products Ltd reserve the right to modify the product without notice, and in these circumstances this document, which is accurate at the time of printing.

7 Should be disregarded. It will however be updated as soon as possible after the change has occurred. Page 4 The PULSACOIL ECO STAINLESS shown schematically above is designed to provide an improved method of supplying mains pressure hot water when used with a suitable off peak electric important feature of the concept is that hot water can be supplied directly from the mains at conventional flow rates without the need for temperature and pressure relief safety valves or expansion vessels. This is achieved by passing the mains water through a plate heat exchanger.

8 The outlet temperature of the domestic hot water is maintained by a printed circuit control board, which controls the speed of the pump circulating the primary water from the store through the plate heat this product does not require a safety discharge from a temperature and pressure relief valve, any installations will be easy to incorporate into the building and will not suffer from the problems associated with using PVCu soil stacks to take the discharge from unvented heat losses from thermal stores should not be directly compared with heat losses from unvented or vented cylinders because they are treated differently in SAP.

9 This is because the unvented and vented cylinders are tested at 65 C and the thermal store at 75 Bottom (O -Peak) immersion heater (1H_1)2. Top (On-Peak) immersion heater (IH_2)3. PHE pump4. Cold Feed5. CW inlet6. HW outlet7. Drain8. Return from PHE to store9. Flow from store to PHE10. Feed and expansion tank11. Primary Flow12. Primary Return13. Control Thermostat10493125678111213 DESIGNINTRODUCTIONPage 5 Technical Specification PULSACOIL ECO StainlessModelPCS150 ECOPCS180 ECOPCS220 ECOE nergy efficiency classCCCOff-peak availableYYYHeat loss (watts)667288 Height (mm)114512751575 Width (mm)560560560 Depth (mm)630630630 Min cupboard height (mm)189520252325 Min cupboard width (mm)600600600 Min cupboard depth (mm)645645645 Weight (empty) (kg)404351 Weight (full) (kg)186208261 Volume of water heated by on-peak heater (litres)

10 146165211 Model Selection Guide PULSACOIL ECO StainlessDwelling TypeBedroom1-22-32-32-4 Bathroom1 or112En-suite shower rooms1121 Standard Economy-7 tariffPCS150 ECOPCS150 ECOPCS180 ECOPCS220 ECOE conomy-10 tariffPCS150 ECOPCS150 ECOPCS150 ECOPCS180 ECON otes:-1. Plastic top up cistern will be supplied The flow rates are based on a 35 C temperature rise and assume that recommended pressures and adequate flow are available at the appliance. The actual flow rate from the appliance is automatically regulated to a maximum of 15 Unit is supplied on a 100mm high installation The domestic hot water outlet temperature is automatically regulated to approximately 52 C, and the temperature is not user adjustable.


Related search queries