PVC Hose - Griflex

1 Special Features Optimum flow is maintained by the smooth bore Excellent transparency, enabling blockages to be located Highly flexible Good resistance to a wide range of chemicals Non toxic suitable for food use Manufactured to comply with ISO 5774, BS6066:1981 & BS EN ISO 6224 :1997 Colour Standard - Clear Red, Blue & Black available HN30 to HN90 Other colours available subject to minimum orderSize Range 3/16 to 2 Standard Length 30 metres / supplied in a coilSubject to minimum order quantity, longer lengths are available to orderTemperature Range -15 C to +65 CHN Clear Braided PVC HoseDescription A lightweight PVC hose, reinforced with high tensile polyester fibres.

2 HN braided PVC Hose is tough, flexible and extremely durable under normal operating conditions. Manufactured from FDA approved ingredients, HN braided PVC hose is suitable for food applications. It is resistant to a wide range of chemicals. Minimum frictional loss is achieved by the smooth HN can be used to convey many liquids and gases under pressure. Applications include factory air lines, pneumatic equipment & general workshop Two layers of clear flexible PVC bonded together encapsulating high tensile polyester 00 44 (0)1675 464803 | fax 00 44 (0)1675 465924 | 3/161/45/163/81/25/83/4111/411 mm HN10HN30HN40HN45HN50HN70HN80HN90HN100HN1 10HN160 WorkingPressureBar mm 3030303030303030303030 All sizes are nominal and normal manufacturing tolerances apply.

3 For further information please call Griflex on 01675 - Clear Braided PVC hose100908070605040302010020 30 40 50 60 70 Temperature CMax. recommended continuous working temperature = 60 CWorking Pressure %HN/03/11HN - Clear Braided PVC Hose(i) Maximum working pressure is based on a factor of safety of 3:1 on short term burst pressure at 20 C. If the temperature increases, please refer to the temperature pressure charts.(ii) Lengths detailed above are as standard, however variations may be available subject to minimum order quantities. Weights are approximate dependant upon working tolerance and density of materials.

4 (iii) Bending diameter information is intended as a guide to the minimum bend radius at 20 C ambient temperature without restricting the bore. It does not mean that the hose cannot be bent below the given dimensions but restriction is likely to occur.[A] Roman Way, Coleshill, Birmingham B46 1HG[T] +44 (0)1675 464803 [F] +44 (0)1675 465924[E] [W] outside diameterid internal diameternote: all dimensions in mmodi