Quality Since 1942 - Wallace Forge

1 Quality Since 1942 Product Catalog 2013 King Pins, Pintle Hooks, Drawbar Eyes Manufactured in the United StatesSince 1942, Wallace Forge Company has been developing Quality products in the trucking industry to satisfy our customers, and expand the : Wallace Forge Company 3700 Georgetown St. Canton, Ohio 44704 Toll Free: (800) 328 1203 Phone: (330) 488 1203 Fax: (330) 488 1217 Website: : Forge Company has been assessed and approved by Smithers Quality Assessments, Inc., to ISO 9001:2008 Quality management system standards and available upon CERTIFIED ISO9001 Pins2-5 Pintle HooksSpring Mounted6-7 Swivel Mounted8-9 Rigid Mounted10-15 Coupling ProductsBall Couplers16-18 Channel19 Dual Purpose Hitches20-23 Nose Plates27 Gooseneck Couplers24 King Pin on Pipe25 Hideaways26 Nose Plates27 Tow Rings27-32 Clevis32 Master Links33 Dump Body AccessoriesGrab Hooks33 Hinge Assemblies33 Mounting Blocks 33 Banjo Eyes34 Door Hinges34 Hand Grips34 Steps34 Tailgate Latch Assemblies35-36 ItemPageTowing AccessoriesBall Mounts37 Triple Ball Hitch37 High Low Bars38-39 Hitch Balls40-41 Bent Hitch Pins 42

2 Receiver Tubes42 Receiver Adapters43-44 Tow Hooks44-46 Snapper Pins46 Trailer AccessoriesD-Rings47 Hitch Pins48 Jacks 48-51 Floor Clip 52 Lashing Rings52-53 Linch Pins54 Outriggers54 Rope Rings55 Spring Latches55-56 Tie Downs57 Contents1-800-328-12032 King PinsKing Pins All Wallace Forge King Pins are 100% American made. Forged out of an AISI 8630 or 4320 material, depending on the model, Wallace Forge s King Pins conform to all SAE and AAR standards. Every one of our King Pins is 100% Brinell hardness checked, magnetic particle inspected and Forge Company King Pin InformationStandard SAE dimensional tolerances apply to all Pins are made from 8630 alloy steel and heat treated to 302-363 Brinell, unless otherwise Forge King Pins will hold approximately 150,000 PSI ultimate and 115 PSI yield KING PINS ARE 100% BRINELL HARDNESS CHECKED, MAGNETIC PARTICLE INSPECTED, AND reading may be different as there may be some surface Style King Pins Made from 8630 Alloy Steel Available in 4320H Steel*These King Pins are also known as Mushroom King Pins.

3 Part # KP-25-A " " " " " 162084193 KP-31-A " " " " " 162084194 KP-38-A " " " " " 162084195 KP-50-A " " " " " 162084197 KP-62-A " " " " " 172084196 KP-75-A " " " " " 17*Minimum order for 4320H Steel 100 King Pins KP-25-AWallace Forge King Pins are not for off the road equipment. Warning: The use of a lube plate alters the king pin dimensions from SAE standards and may prevent proper PinsDrilled A Style King Pins Made from 8630 Alloy Steel Available in 4320H Steel*All of the below King Pins have eight inch drilled holes spaced on a inch diameter.

4 If you require different sized drilled holes, please specify on purchase # *Minimum order for 4320H Steel 100 King Pins KP-25-A DrilledWallace Forge King Pins are not for off the road equipment. Warning: The use of a lube plate alters the king pin dimensions from SAE standards and may prevent proper PinsB & C Style King Pins Made from 8630 Alloy Steel Available in 4320H Steel*These King Pins are also known as Double Spool King Pins. Part # " " " " " " " " " " " " " " " " 192085200KP-25-C2" " " 2"172085201KP-31-C2" " " 2"172085202KP-38-C2" " " 2"17 2085203KP-50-C2" " " 2"17*Minimum order for 4320H Steel 100 King Pins3 Heavy Duty King Pins Made from 8630 Alloy Steel Heat-Treated to Brinell 302-363 These King Pins are for off the road equipment and heavy duty trucks.

5 Drilled models feature four inch holes on a diameter of #ModelBolster PlateThickness (B) "432394163KP "432393162 DKP 848-38 "422394163 DKP 848-50 "42KP-25-BKP 848-38KP 848-38 PinsCruciform King Pins Forged 4320H Steel Heat-Treated to Brinell 380-420 These King Pins meet all the requirements of the Association of the American Railroads, AAR, Standard M-931 when installed #ModelBolster " " " " " " " " " " " " " " " " " " "18 " " " " " " " " " " " " " " " "19 King Pin LocksThe King Pin Lock comes with 2 keys, please specify key number. Lunette Lock does not come with lock and # Pin Lock Inside Diameter , Length LockFits 2 to 3 diameter eye4 King Pin LockLunette LockWallace Forge King Pins are not for off the road equipment.

6 Warning: The use of a lube plate alters the king pin dimensions from SAE standards and may prevent proper HooksSpring Mounted Pintle HooksAll the below Pintle Hooks are used in the Utility and Municipality Industry for over the road and off the road equipment. For use with drawbar eye dimensions: 2 to 3 eye with a ring diameter of 1 to 1 . Install with Grade 8 bolts and mount to a plate with a minimum thickness of .Part #ModelDimensionsMax Ton Spring6 "11 "30,000 4,00050204410125 Ton Spring6 "11 "50,000 6,0005515 Ton SpringReplacement PartsPart #Description2089176 15 Ton Latch Assembly2090177 25 Ton Latch Assembly2099178 15 Ton- Snapper Pin, S-Hook and Chain for Latches2099179 25 Ton-Snapper Pin, S-Hook and Chain for Latches2097187 15/25 Ton Cushion Spring2102189 2043100, 2044101 Mounting Brackets (Pair) Wallace Forge is not liable if pintle hooks are welded or all products.

7 To prevent personal injury or vertical damage, the mounting location must be capable of supporting at least 15% more than the maximum amount to be Ton Spring15 Ton Spring25 Ton SpringMounting HooksAll the below Pintle Hooks are used in the Utility and Municipality Industry for over the road and off the road equipment. For use with drawbar eye dimensions: 2 to 3 eye with a ring diameter of 1 to 1 . Install with Grade 8 bolts and mount to a plate with a minimum thickness of .Part #DescriptionMax Ton, no safety chain30,000 6,000 412046103T-25 Ton, no safety chain50,000 6,000 42T-15 Ton No Safety Chain AttachmentT-25 Ton No Safety Chain AttachmentT-15 Ton No Safety Chain AttachmentT-25 Ton No Safety Chain AttachmentWallace Forge is not liable if pintle hooks are welded or Spring Mounted Pintle HooksReplacement PartsPart #Description2089176 15 Ton Latch Assembly2090177 25 Ton Latch Assembly2099178 15 Ton- Snapper Pin, S-Hook and Chain for Latches2099179 25 Ton-Snapper Pin.

8 S-Hook and Chain for Latches2097187 15/25 Ton Cushion Spring1-800-328-12038 Pintle HooksB-8 Swivel Mounted Pintle HookThese Pintle Hooks are recommended for off the road equipment and are used with a drawbar with an eye diameter of 2 " to 3".Part #ModelMax with Brackets18,0002,000152052109NB-8 No Brackets18,0002,00010 All military products must be individually quotedSwivel Mounted Pintle Hooks Part #ModelMax Ton30,0004,000272049106B-25 Ton50,0006,00028B-8 with BracketsB-8 No BracketsB-15 TonB-25 TonB-15 TonB-25 Ton25 Ton Replacement PartsPart #Description2090177 25 Ton Latch Assembly2097187 Cushion Spring2102189 Mounting Brackets (Pair)2099179 25 Ton-Snapper Pin, S-Hook and Chain for LatchesBracketsB-815 Ton Replacement PartsPart #Description2089176 15 Ton Latch Assembly2097187 Cushion Spring2102189 Mounting Brackets (Pair)

9 2099178 15 Ton- Snapper Pin, S-Hook and Chain for LatchesB-8 Replacement PartsPart #Description2088175 Latch Assembly2382151 Snapper Pin, S-Hook and Chain for HooksB-30 Swivel Mounted Pintle HookThese Pintle Hooks are to be used with a drawbar with a 3" diameter eye and a ring thickness 1 ". Mounting holes are 6 " from center to center and accept " Grade 8 #ModelMax ,00012,200 382053110NB-30 No Mounting Brackets60,00012,200 28 All military orders must be quoted, when referencing please use part number Swivel Pintle HookThese Pintle Hooks are to be used with a drawbar with a 3" diameter eye and a ring thickness 1 ".

10 The mounting holes accept 15/16" #ModelMax B-50100,00020,000612054111 NB-50 No Mounting Brackets100,00020,00042 All military orders must be quoted, when referencing please use part number AA-52550-1. 30 Ton Replacement PartsPart #Description2091178 Latch Assembly2103190 Mounting Brackets (Pair)2056175 Cotter Pin, S-Hook and Chain for Latch50 Ton Replacement PartsPart #Description2093180 Latch Assembly2104191 Mounting Bracket2049340 Cotter Pin, S-Hook and Chain for Latch1-800-328-120310 Pintle HooksRigid Mount Pintle HooksThese Pintle Hooks are to be used with a drawbar with a 2 "-3" diameter #ModelDimensions Max Ton17/32"10,0002,00082055112R-8 Ton17/32"16,0003, Ton17/32"30,0006,000112057114R-20 Ton19/32"40,0008, Ton Rigid Mount Pintle HookThese Pintle Hooks are to be used with a drawbar with a 2 "-3"' diameter #ModelMax Ton60,00015.