Example: quiz answers

Quality Two Peg Test Record Sheet - AJB Setting Out

Quality Two Peg Test Record Sheet A J Burgess 2010 Instrument type: Serial No: Calibration Due: Checked By: Date Checked: Weather Conditions: Point A and B to be either Pegs/Pins in soft ground or survey nails in a hard surface. Instrument to be located on same line as Points A and B Visual inspection of instrument: No damage, loose screws or water ingress Pass / Fail Rotate instrument 180 Circular bubble remains central (Self levelling laser N/A) Pass / Fail Setup location 1 Setup location 2 Point A reading Point B Reading Pt A - Pt B (Highest Lowest) Setup 1 Setup 2 Allowable collimation error +/- 2mm Setup 1 Setup 2 If Error greater than 2mm, repeat to ensure no observation errors, before adjusting instrument Notes: Instrument has been found to be NOT* within allowable tolerances Signed: (* Delete as necessary) 15m* 15m* Pt B Setup 1 Pt A Pt A Pt B Setup 2 1m 30m * +/.

Site Engineering Guide www.ajb-settingout.co.uk . Author: Andrew James Burgess Keywords: Site Engineering;QA Created Date: 12/26/2012 6:21:07 PM

Tags:

  Tests, Sheet, Quality, Record, Quality two peg test record sheet

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Quality Two Peg Test Record Sheet - AJB Setting Out

1 Quality Two Peg Test Record Sheet A J Burgess 2010 Instrument type: Serial No: Calibration Due: Checked By: Date Checked: Weather Conditions: Point A and B to be either Pegs/Pins in soft ground or survey nails in a hard surface. Instrument to be located on same line as Points A and B Visual inspection of instrument: No damage, loose screws or water ingress Pass / Fail Rotate instrument 180 Circular bubble remains central (Self levelling laser N/A) Pass / Fail Setup location 1 Setup location 2 Point A reading Point B Reading Pt A - Pt B (Highest Lowest) Setup 1 Setup 2 Allowable collimation error +/- 2mm Setup 1 Setup 2 If Error greater than 2mm, repeat to ensure no observation errors, before adjusting instrument Notes: Instrument has been found to be NOT* within allowable tolerances Signed: (* Delete as necessary) 15m* 15m* Pt B Setup 1 Pt A Pt A Pt B Setup 2 1m 30m * +/.